drilling equipment Articles

  • ALBANISA Oil Spill Equipment Setup - Case Study

    As a part of the Bolivarian Alliance for the People of Our America (acronym in Spanish: ALBA), Nicaragua has received funds to build a new oil hub in the Caribbean. The hub will be available for oil companies in order to store their products before reaching its final destination. By doing that the profit will be increased as the costs for transportion is reduced. The updated environmental ...


    By DESMI A/S

  • Hart`s E&P: Smart drillpipe technologies for the driller’s toolbox

    Advances in technology boost successful development of new LWD and drilling technology offshore the Norwegian Continental Shelf. Wired drillpipe (WDP) technology was implemented on a multiple-well project located offshore the Norwegian Continental Shelf. The operator’s main objective was to drill each well as cost-effectively as possible while making sure that the wellbore placement ...


    By Baker Hughes

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Drilling: Then & Now

    In a recent conversation with a colleague, we discussed the then and now of drilling. Reflecting back to 1988, it was jarring to realize that we have entry-level Geologists & Engineers today that were born that year! They won’t ever truly know what it was like then, and how far the drilling industry has come. They would be amazed at the lives, limbs, and hearing lost over past decades, ...


    By Woodward Drilling

  • How to Deal with Drilling Waste

    At present, environmental protection is a basic state policy in China, and it has been a strategic mission and goal for our country to maintain a sustainable development of society, economy and environment. Along with the continuous improvement of environmental laws and the increasing environmental awareness among people, the departments concerned have successively enacted various environmental ...


  • Drilling Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solids control ) systems. These solids control systems are not stand-alone units. They are part of the drilling mud system along with the ...


  • Geo Drilling International: Hands-On

    Boart Longyear has launched a core-orientation system made for drillers, by drillers Although critical for mapping exploration and minesite development, core orientation is part of the drilling process that has experienced only incremental product improvements through small changes to the process and equipment. Boart Longyear has now introduced TruCore, a first-inindustry integrated ...


    By Boart Longyear Inc.

  • Drilling decanter centrifuge business in America

    KOSUN, as a professional oilfield solid control equipment manufacturer, has a pleasure of offering you drilling mud cleaners at reasonable prices. It also gives waste management equipment, such as vertical centrifuge, high G dryer and screw pump. A decanter centrifuge can make drilling cuttings or ...


  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • Drill King International is exploring reverse-circulation drilling opportunities in Chile

    The new XT RC50 hammer from Drill King International completed drilling trials at the beginning of August 2016. This 5in (127mm) reverse-circulation (RC) hammer is the first one from the XT (Extreme Torque) series, introduced by the down-the-hole (DTH) drilling equipment manufacturer from Texas, US. The XT RC hammer series will complement Drill King's extensive line of DTH air- and water-powered ...

  • Modeling emissions from offshore drilling

    To regulate drilling activities proposed by oil and gas companies in the oil-rich Gulf of Mexico (GOM), governing agencies require the submittal and approval of certain plan documents before drilling activities can be initiated. For drilling activities in the Western GOM, these plans typically consist of one of the following: EP, or Exploration Plan – required to conduct ...


    By Trinity Consultants

  • Drilling Mud and Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solid control ) systems. These solid control systems are not stand-alone units. They are part of the drilling fluids system along with the drilling fluid and the fluid pump. ...


  • Drilling Mud in Horizontal Directional Crossing Project

    Horizontal Directional Crossing Project has a not long development in the country and even the world. But in recent years, pipeline horizontal directional crossing has been great development, large-scale construction of oil and gas pipelines across the length and across the diameter of the continuous creation of new records. In horizontal directional crossing project, the drilling mud play a very ...


  • Mono nov at the cutting edge of drill waste management

    Equipment from Mono is being used in a joint venture with Baroid Drilling Fluids at a state of the art facility in Kazakhstan. Baroid, part of the Halliburton Company, provides drilling fluids and services to energy companiesworldwide, and is a global leader in Total Fluids Management services. The system is a fully contained closed system and uses a Mono pump for handling oil-based mud ...


    By NOV Mono - Mono Pumps Ltd

  • Mono nov at the cutting edge of drill waste management

    Equipment from Mono is being used in a joint venture with Baroid Drilling Fluids at a state of the art facility in Kazakhstan. Baroid, part of the Halliburton Company, provides drilling fluids and services to energy companiesworldwide, and is a global leader in Total Fluids Management services. The system is a fully contained closed system and uses a Mono pump for handling oil-based mud ...


    By NOV Mono - Mono Pumps Ltd

  • Solids Control for Drilling Mud Process System

    Nowadays, more and more drilling contractors recognize solids control’s importance to oil and gas drilling, HDD, CSM/CBM exploration, etc. How does solid control affect well drilling? Please find the following details. Cost Comparison of Two Oil Well Drilling Let’s find the difference of two kinds of oil well drilling with and without solids control system. Final effect or result is ...


  • Maintenance of Oilfield Drilling Mud Decanter Centrifuge

    Decanter centrifuge is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to ...


  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • Case study: Contract title - ADCO Drilling Operations

    Contract Location: Habshan, U.A.E. Contract Start Date: 10/2002 Contract Finish Date: 2005 Quantity Treated (m3): 30,000 tons Treatment Method: Thermal Desorption Rate of Treatment (m3/hr): 3.5 to 4.5 tons per hour (dependent upon feed) Working Hours per Day: 24 Working Days per Week: 5.5 Project Description: RLC Technologies contracted to ...


    By RLC Technologies, Inc.

  • What`s at Stake: The debate over Arctic Drilling

    Royal Dutch Shell is planning to park two massive Arctic oil drilling rigs in Seattle's waterfront before they head north - but the petrochemical giant will first have to get around protesters in kayaks and others who want to thwart the new frontier in oil exploration and spark a national debate about fossil fuels and climate change. Here's a look at the debate over Shell's plans to drill in the ...


    By Associated Press

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you