drilling fluid solids removal Articles

  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • Optimizing drilling efficiencies with a solids control system

    The correct solids control system can improve drilling rig efficiency, reduce costs and minimize the environmental footprint of your operation Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due ...

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Drilling Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solids control ) systems. These solids control systems are not stand-alone units. They are part of the drilling mud system along with the ...


  • Principles of Solids Control

    Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due to a growing awareness that drilling fluid maintenance and disposal can become exponential problems as they are both harmful to the environment and ...


    By Elgin Separation Solutions

  • Drilling Mud and Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solid control ) systems. These solid control systems are not stand-alone units. They are part of the drilling fluids system along with the drilling fluid and the fluid pump. ...


  • SAS drilling mud cleaning products

    Effective & fast mud cleaning for the oilfield. SAS microemulsion drilling mud cleaning products speed up the cleaning and removal of drilling mud waste. The cleaning of drilling mud residues from mud pits, offshore supply vessels and mud trucks is traditionally a time consuming task. Using high pressure water or standard cleaning detergents usually results in large volumes of mud slop ...

  • The purpose of using drilling shale shaker in oilfield

    The purpose of using drilling shale shaker is to remove the large cuttings in drilling fluid. Each set of solids control system must be equipped with a sufficient number of shale shaker to ensue the 100% processing rate of drilling fluid circulation. Shale shaker is the first solids control equipment to process and adjust the drilling fluid, ...


  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • Customized Drilling Waste Hi-G Dryer Shipped to North Africa

    Along with large scale application of KOSUN drilling waste management equipment in North Africa market, establishment of two after-sales service centers respectively in Egypt and Algeria and four-year strategic cooperation with a local partner, KOSUN drilling waste management equipment has been well accepted by customers in North Africa. Now there are 12 KOSUN ...


  • Surface active solutions tank cleaning & crude oil sludge removal

    For over ten years Surface Active Solutions has led the way in developing integrated microemulsion solutions for tank cleaning operations, crude oil sludge treatment and slops treatment. The company, with offices in Houston and Grangemouth (Scotland) aims to create real synergy in its approach to tank cleaning by combining its microemulsion chemistries with automated tank cleaning systems. The ...

  • The use of oilfield shale shaker

    Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since drilling fluids solids control is vital in keeping down costs associated with the drilling ...


  • Common challenges relative to the use of Decanter Centrifuges for barite recovery in the oil & gas industry

    When centrifuges are properly deployed, they can have dramatic effects on drilling performance. In fact, without them, many of the advances made in drilling would not have been considered achievable. Classically, we believe that centrifuges can achieve two common goals: Reduce the content of drilled fines, specifically colloidal solids, and Perform barite recovery in order to reduce ...


    By Elgin Separation Solutions

  • Saving Time, Money And The Environment Through Chemistry - Case Study

    Since 1990, KEM-TRON Technologies Inc. (KEM-TRON) has been providing sophisticated solids control and dewatering products to customers around the world. In doing so, KEM-TRON has developed a unique set of core competencies that have made us a service leader in separation technology. By combining expertise in both dewatering polymers and solid/liquid separation technologies, KEM-TRON has developed ...


    By Elgin Separation Solutions

  • Oil and Gas Development - Onshore Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Shale gas extraction - frac water treatment

    The client The Client is a company which makes part of a Group based in the Eastern Europe and specialized in drilling activities and well services for the exploration/extraction industry. The Client’s needs Shale is a sedimentary rock that is predominantly comprised of consolidated clay-sized particles. Shale gas is produced from organic-rich shale ...

  • Muddy waters

    Mark Zwinderman of Surface Active Solutions, looks at the dangers involved in the cleaning and maintenance of mud tanks and associated equipment The oil industry involves many thousands of people working daily in potentially hazardous circumstances with dangerous chemicals and sophisticated engineering equipment. There has been a consistent and determined drive by the industry to reduce the ...

  • Reaching underground resources

    Accessing critical resources such as geothermal energy and natural gas requires drilling — an expensive, energy-intensive, messy process with today's technology. An MIT team has been looking into a more elegant approach. Instead of grinding rock to bits, they would use a continuous beam of energy to vaporize it and then blow out the tiny particles that form with a high-pressure stream of ...

  • Optimizing water management in hydraulic fracturing for shale oil and gas production

    Centralized treatment of wastewater is emerging as a viable solution for long-term efficiency in managing water sourcing and wastewater treatment in hydraulic fracturing. The number of hydraulic fracturing (fracking) shale oil and gas wells in the United States continues to increase. Within the Bakken Shale formation alone, in North Dakota and Montana, upwards of 15,000 hydraulic fracturing ...


    By WesTech Engineering, Inc.

  • Optimizing Water Management in Hydraulic Fracturing for Shale Oil and Gas Production

    Centralized treatment of wastewater is emerging as a viable solution for long-term efficiency in managing water sourcing and wastewater treatment in hydraulic fracturing. The number of hydraulic fracturing (fracking) shale oil and gas wells in the United States continues to increase. Within the Bakken Shale formation alone, in North Dakota and Montana, upwards of 15,000 hydraulic fracturing ...


    By WesTech Engineering, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you