drilling service Articles

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Exhaust Purifier for Rock Drill

    Description Gardner Denver MK45H rock drill. Challenge A universal exhaust purifier was required that could easily be retrofitted into the vehicle exhaust pipe. Solution DCL supplied an exhaust purifier with connection cones to match the vehicle exhaust tube diameter. The unit was connected to the exhaust tube with standard muffler u-clamps. Quick-release clamps on ...


    By DCL International Inc.

  • How to Deal with Drilling Waste

    At present, environmental protection is a basic state policy in China, and it has been a strategic mission and goal for our country to maintain a sustainable development of society, economy and environment. Along with the continuous improvement of environmental laws and the increasing environmental awareness among people, the departments concerned have successively enacted various environmental ...


  • SAS drilling mud cleaning products

    Effective & fast mud cleaning for the oilfield. SAS microemulsion drilling mud cleaning products speed up the cleaning and removal of drilling mud waste. The cleaning of drilling mud residues from mud pits, offshore supply vessels and mud trucks is traditionally a time consuming task. Using high pressure water or standard cleaning detergents usually results in large volumes of mud slop ...

  • Modeling emissions from offshore drilling

    To regulate drilling activities proposed by oil and gas companies in the oil-rich Gulf of Mexico (GOM), governing agencies require the submittal and approval of certain plan documents before drilling activities can be initiated. For drilling activities in the Western GOM, these plans typically consist of one of the following: EP, or Exploration Plan – required to conduct ...


    By Trinity Consultants

  • Mono nov at the cutting edge of drill waste management

    Equipment from Mono is being used in a joint venture with Baroid Drilling Fluids at a state of the art facility in Kazakhstan. Baroid, part of the Halliburton Company, provides drilling fluids and services to energy companiesworldwide, and is a global leader in Total Fluids Management services. The system is a fully contained closed system and uses a Mono pump for handling oil-based mud ...


    By NOV Mono - Mono Pumps Ltd

  • Mono nov at the cutting edge of drill waste management

    Equipment from Mono is being used in a joint venture with Baroid Drilling Fluids at a state of the art facility in Kazakhstan. Baroid, part of the Halliburton Company, provides drilling fluids and services to energy companiesworldwide, and is a global leader in Total Fluids Management services. The system is a fully contained closed system and uses a Mono pump for handling oil-based mud ...


    By NOV Mono - Mono Pumps Ltd

  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • Drilling Mud in Horizontal Directional Crossing Project

    Horizontal Directional Crossing Project has a not long development in the country and even the world. But in recent years, pipeline horizontal directional crossing has been great development, large-scale construction of oil and gas pipelines across the length and across the diameter of the continuous creation of new records. In horizontal directional crossing project, the drilling mud play a very ...


  • Case study: Contract title - ADCO Drilling Operations

    Contract Location: Habshan, U.A.E. Contract Start Date: 10/2002 Contract Finish Date: 2005 Quantity Treated (m3): 30,000 tons Treatment Method: Thermal Desorption Rate of Treatment (m3/hr): 3.5 to 4.5 tons per hour (dependent upon feed) Working Hours per Day: 24 Working Days per Week: 5.5 Project Description: RLC Technologies contracted to ...


    By RLC Technologies, Inc.

  • Optimizing drilling efficiencies with a solids control system

    The correct solids control system can improve drilling rig efficiency, reduce costs and minimize the environmental footprint of your operation Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due ...

  • KASTHEW Borehole-Drilling Company Uganda Ltd Co. Profile; http://www.kasthewdrilling.co.ug/

    www.kasthewdrilling.co.ug We are Kasthew Borehole / Water Drilling Company Ltd (Uganda). We offer bore-hole drilling services under our company (Kasthew Drilling Co. Ug Ltd). Our team has an experience of handling above 420 projects (in the last 8 years across villages in Uganda and South Sudan. www.kasthewdrilling.co.ug The following are among our listed services; (Uganda) ...

  • Customized Drilling Waste Hi-G Dryer Shipped to North Africa

    Along with large scale application of KOSUN drilling waste management equipment in North Africa market, establishment of two after-sales service centers respectively in Egypt and Algeria and four-year strategic cooperation with a local partner, KOSUN drilling waste management equipment has been well accepted by customers in North Africa. Now there are 12 KOSUN ...


  • Directional drill resale values and how to get the most for your rig

    Wide resale value disparity among brands There’s a lot to consider when purchasing or leasing a horizontal directional drill — features, durability, support, training and overall value. But one area often overlooked is the potential resale value of the unit. Too often contractors will overlook the potential value of the machine after its useful life in their ...


    By Vermeer

  • Getting ahead of the Caribou - pitdry process—innovative solidification solution for spent drilling fluids

    An oil company has been producing oil and gas in British Columbia’s Southern Foothills since 1992. The operator has continuously invested in the area and recently opened up new gas producing wells northwest of Fort St John, the largest city in the northeast region of British Columbia. The new wells are situated 4,600 feet above sea level in a rigid mountain terrain. The viable way to connect the ...


    By CETCO Energy Services

  • A Plast-O-Matic pressure regulator protects a stem drilling machine from overpressure

    Mitsubishi Heavy Industries (MHI) is one of the leaders in the world of designing, manufacturing, installing, and servicing industrial power systems. As a top Fortune “Global 150” company, MHI generates more than $25 billion in annual revenues and employs more than 40,000 people worldwide. A key subsidiary of MHI is Mitsubishi Power Systems, located in Orlando, Florida. Established in ...


  • Drilling Fluids Market Will Grow at a steady Rate of 8.2% from 2014 to 2020: Grand View Research, Inc

    The global market for drilling fluids is expected to reach USD 14.92 billion by 2020, according to a new study by Grand View Research, Inc. Increasing drilling activities mainly in South America and Asia Pacific is expected to drive the market for drilling fluids. Grand View Research also observes that depleting natural has been prompting industry players to shift their focus towards exploring ...


  • On-site water treatment service cuts costs

    After more than two decades in the global oilpatch, Stuart Snydmiller thinks the future for his startup firm is in water, not petroleum. Or at least waste water.Tangent Environmental Technologies, owned with brother Jason and others, has taken existing technologies and put them together into a package that offers huge savings for drilling firms and any industrial operation that needs to process, ...


  • An Overview of STI Group’s Services for the Oil & Gas Production Sector

    Oil and gas production companies often operate on a tight margin, making both the price of oil and the costs of extraction and transport extremely important. While of course there is little companies can do to affect the price of oil, it is imperative that they get the best prices and quality possible when it comes to equipment, fabrication, and services. STI Group provides the quality, safety, ...


    By STI Group, Inc.

  • Companies and people leading the restructured environmental services industry in Canada

    The landscape of environmental service providers in Canada has changed dramatically in the past four or five years, especially with mergers and acquisitions announced in recent months between some fast-growing businesses. Only a decade ago the industry was dominated by a couple of publicly-traded continental companies that gobbled up numerous small and medium-size enterprises to offer customers a ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you