drum press Articles

  • Bramidan special drum press helps preserve arctic environment - Case Study

    Used for scientific research and closed during the harsh winter months, this area is largely undeveloped, particularly in terms of infrastructure. There are no supermarkets, no highways, nor even roads. Provisions are packed into a small aeroplane and flown in. Waste materials are flown out. “We need to get all the non-burnable waste materials off site before the start of winter,” ...


    By Bramidan Balers

  • Struvite screw presses removal trial case study

    Based on the lab supervisor’s recommendation, the plant ordered two 55 gallon drums of JS 9325 for a plant trial on the screw press. They set up a spray system to meter JS 9325 on the outer surface of the screw press. During the first five (5) days of the struvite removal trial, plant operations noticed that the openings on the screens were getting cleaner. They reduced the cleaning cycle ...


    By Struvite Removal

  • How are you recycling your waste oil drums and paint boxes?

    Does your company have waste 210 L oil drums? Or small paint boxes? How do you recycle these drums now? ...


    By Enerpat Group UK Ltd

  • Liquid Filtration and Media World Markets Report

    Provides analyses & forecasts for belt presses, automatic back wash filters, filter presses, bags, leaf, drum and sand filters in each of 80 countries segmented into 10 industry segments. Analysis and forecasts of media is also included. In this fast changing market place it is necessary to have information as current as Tuesday, November 17, 2009 . Find out how this report reflects the ...


    By The McIlvaine Company

  • The Variety Kinds of Fote Briquette Machine

    To make our life more convenient and efficient, Fote Machinery produces many machines to meet the satisfactory of people. For example, Fote briquette machine which is widely used in coal, chemical. And there are many kinds of briquette machine, such as coal ball press machine, coal briquette press machine, dry ...


    By Fote Machinery

  • Case study: Mechano-chemical grinding

    Challenge Traditional grinding mills reclaim only a fraction of precious metals from ore, leaving valuable material in the tailings. These minerals are more difficult to liberate, as it requires the ore to be ground to a very fine mesh. Approach GK was approached by a company who had a proprietary chemistry solution for recovering minerals from an existing ...


    By General Kinematics

  • Homogenous mixing for shortening of composting processes - Case Study

    Various treatment processes are used today for manufacturing compost, of which two are of particular interest in terms of mixing and treatment technology. They are open composting and container composting. In both cases e.g. sewage sludge (wet and dry), chopped paper, loppings, green waste, and sawdust are pre-mixed with the possible addition of small amounts of active substances. The task of ...


    By AVA - Huep GmbH u. Co. KG

  • Mixed MSW composting is steady as she goes

    Two new facilities came on line in 2006, while one ceased operation and a second is shifting to a new technology. Annual survey identifies a total of 14 plants. Part I STEADY-STATE may be the best phrase to describe the status of facilities composting mixed municipal solid waste in the United States. In fact, steady-state may be the best phrase to describe solid waste composting in general since ...


    By BioCycle Magazine

  • Streamlining Wastewater Treatment in Poultry Processing: Michigan Turkey and Lyco Team Up to Provide a Showpiece for Reducing BOD and TSS Levels

    With the steady increase in poultry processing rates there has been a corresponding increase in wastewater pollutant concentrations. Despite mechanical improvements in wastewater treatment, many poultry processors continue to pay unnecessarily high fees for municipal water discharges. $100-million-annual processor, Michigan Turkey Producers, in conjunction with Lyco Manufacturing, has set up a ...


    By Lyco Manufacturing, Inc.

  • How a Simple Bench-Scale Test Greatly Improved the Primary Treatment Performance of Fine Mesh Sieves

    In Norway fine mesh sieves are frequently used for primary treatment or as the only treatment before wastewater is discharged to coastal waters. The reasons for this are the intensive product development of fine mesh sieves taking place in Norway, and the significantly reduced investment costs and space requirements compared to other primary treatment processes. Historically the design of these ...

  • Oil skimmers solutions guide: wastewater treatment industry

    Growing Snack-Food Manufacturer Reduces Costs, Recycles Waste A privately held snack-food manufacturer in Ohio expected to increase production of potato chips by 20%, to about 72 million pounds a year. While more potato chips would mean more profits, it also would mean more oil-laden wastewater from washing the potatoes and the fryers used to cook them. PROCESS: When ...


    By Oil Skimmers, Inc.

  • Rapid blending of nutraceuticals in a restricted space

    Although vitamins and minerals have long been a mainstay in health maintenance, a new category of health maintenance products has created an entirely new market over the last two decades. The term "nutraceutical" was first defined in 1989 by Stephen DeFelice, M.D. as "... food, or parts of a food, that provide medical or health benefits, including the prevention and treatment of disease." Since ...

  • Wastewater-Solids Dewatering Odor Control - Case Study

    Background The Milan Wastewater Treatment Plant, located just south of Moline, Illinois, is a 1.7 MGD (6,434 m3/day) activated sludge facility with an average wastewater flow of 700,000 gpd to 800,000 gpd. This facility dewaters primary sludge using a belt filter press (Figure 1). The press operates an average of three times per month, 8 hours per day at a pump rate of 100 gpm. The ...


    By Carus Corporation

  • Solvent Recovery in Flexographic Printing: Fildes Pty Ltd

     Background Fildes Pty Ltd is a long established, family owned company, located in Sandringham, Victoria. Fildes manufacture quality labels, bags and retail packaging. The company currently supplies 90 per cent of the Australian pharmacy market, as well as packaging for a wide range of high profile retailers. The Process As part of the ...


  • Intensified ribbon blending of melamine compounds cuts cycle times 25% for furniture molder

    Melsur Corporation, the world's leading supplier of hard plastic melamine school furniture, molds components from a mixture of resin, wood flour and pigments. Each of the 32 color variations, 30 products and custom designs must be blended individually, a process that can take up to four hours, depending on product. Anything less than empirically defined cycle times alters the final color and ...

  • Strategic Abatement of Emission to Economically Support Development of High Profile Real Estate Adjacent to a Wastewater Reclamation Facility

    ABSTRACTThe Des Moines Wastewater Reclamation Authority operates a 97-million gallon per day regional wastewater reclamation facility (WRF) largely constructed in the mid 1980s to serve the greater Des Moines, Iowa metropolitan area. Originally constructed in a largely rural area, current plans for the area around the WRF establish a need for emissions control to reduce offsite odor impacts, in ...

  • The Role of Lignin in Pelleting Process

    When the crushed raw materials are feed into the pellet mill, they will be pelletized after being processed by rollers and die. You may wonder how the powdered materials could be formed into compact and glossy pellets. The magic lies in a kind of natural element named lignin. 1. The Introduction of ...


  • Oil skimmers cure a header headache

    Oil skimmers are being used in a major Cleveland bolt making plant to clean liquid coolant and clear the air, virtually eliminating the oil smoke and haze that are inherent in hot heading applications. The skimmers are equally efficient in less demanding press operations. Lake Erie Screw Corporation installed the five skimmers - they are Abanaki models - to serve from one to seven headers each. ...


    By Abanaki Corporation

  • Bringing powdered metal blending in-house, rotary-style

    When processing powdered metal compounds for products such as gyro rotors, flywheels, counterbalances, boring bars and grinding quills, the proportion of powdered metal ingredients must be precise, and the distribution of those ingredients 100 percent uniform. Mi-Tech Metals, Indianapolis, IN, has been manufacturing products from high-density tungsten-based alloys for more than 26 years, during ...

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you