drum spill containment Articles

  • Spill prevention, control and countermeasure

    Background One of the EPA’s mandates is to prevent oil spills from polluting our nation’s navigable waterways which are defined under the Clean Water Act and Oil Pollution Act as any waterway or body of water that is used for ...

  • Safer drum handling with morse drum lifters from interstate products

    Interstate Products, Inc. (IPI), the leading provider of spill containment products and the preferred source for environmental and industrial solutions offers a wide variety of Morse Drum Lifters that are designed for safer handling of large steel, plastic and fiber containment drums. IPI’s expanded selection of drum lifter hoist attachment options are designed for material handling safety ...


    By Interstate Products Inc

  • Inland diesel spill case study

    Introduction In January 2000 an oil spill occurred in the North of England. It was estimated up to 30,000 litres of diesel fuel had escaped the fuel storage tanks of a major factory due to a burst pipe. Fortunately most of the spilled oil found its way to a nearby drainage facility owned by the local Water Authority. Due to neglect the drainage outlet pipe that feeds ...

  • Offshore oil spill clean up case study

    In the event of a major incident occurring offshore, for example a tanker casualty running aground or breaking up for any reason, it is of paramount importance to deploy emergency response to protect and save human life. Once this has been done an assessment of the casualty should be made on whether it is possible to salvage the vessel and its contents and to assess the type and amount of oil ...

  • Inland oil spill clean up case study

    Introduction The essential strategy for inland spill clean up techniques should be containment, recovery and temporary storage. Secondary needs will include transportation and possible disposal - or recycling. It is important to discover the source of the spill which might not be straight forward. A steady slow seepage from a leaking disused oil storage tank may be very difficult ...

  • Using a Self Bailer on Containment Sumps to Filter Hydrocarbons

    How do you eliminate problems associated with the collection of rainwater in outdoor containment systems and maintain compliance with EPA and Clean Water Act regulations?  Since most outdoor oil storage tank sumps and oil drum spill pallets will inevitably be exposed to local precipitation and storm water runoff from nearby catchment surfaces, it is necessary to make sure you ...


    By Interstate Products Inc

  • Morse Drum Rollers from IPI Offer Ergonomics and Safer Handling

    Interstate Products, Inc. (IPI), the leading provider of spill containment products and the preferred source for environmental and industrial solutions offers a wide variety of Morse drum rotators and drum tumblers that are designed for safer handling, mixing and pouring from large steel, plastic and fiber containment drums.  Portable drum rotators and tumblers are ideal for industrial users ...


    By Interstate Products Inc

  • Chemical storage buildings isolate hazardous liquids and minimize damage from spills

    The improper storage of corrosives and flammable liquids is the leading cause of spills that can result in damage to facilities and impact worker safety. One of the most effective practices to help minimize damage from chemical spills is to isolate the various chemical hazards. Since knowledge of chemical compatibility is critical, it is important to understand that there are two major types of ...


    By Interstate Products Inc

  • Important environmental issues at aviation facilities, Part I

    There are numerous federal, state, and local environmental regulations that apply to aviation facilities. The requirements are continually expanding due to new and revised regulations. There has recently been a significant increase in inspection frequency and official letters of non-compliance. FBO facilities are the most often targeted. Since fuel storage is usually the greatest environmental ...


    By DES, Inc.

  • Improved Oil Handling and Disposal: Rocklea Diesel Injection Service

     Background Truck mechanical workshops use large quantities of oils. Over time, there is an inevitable build up of spillages to give the traditional image of a messy, dirty workshop environment. This is not desirable when working with diesel injection systems. A high level of cleanliness and precision is essential. Several staff members of Rocklea Diesel Injection Service are ...


  • Waste Reduction and Chemical Minimisation: Oxford Panels

    A program involving recycling, waste reduction and waste treatment, is saving Oxford Panels around $1,000 annually on waste removal cost alone. A 30% saving on the cost of raw materials such as thinners and sandpaper, has also been recorded. Importantly, staff morale has increased. They like the reduction in chemicals and pollutants in their workplace and take pride knowing they are actively ...


  • Case study - San Francisco Public Utilities Commission (SFPUC)

    Service: Sahara Leak Detection Client: San Francisco Public Utilities Commission (SFPUC) Project Date: 2004 Type of Pipelines: Transmission Mains Diameter: 42 and 54-inch Pipe Material: Cast Iron Steel Length: 1.72 miles The San Francisco Public Utilities Commission (SFPUC) provides water to 2.4 million people in San Francisco, Santa Clara, Alameda and San Mateo ...


    By Pure Technologies

  • Blending microbes demands gentle touch

    Environmental-restoration product manufacturer requires fast, uniform, gentle blending of powdered microbes, enzymes and nutrients The microbial formulations that United-Tech, Inc. produces are used to break down or detoxify a broad array of complex, often-toxic organic compounds, greasy spills and other contaminants in a variety of ...

  • Assessment of Environmental ‘Hot Spots’ in Iraq

    Untitled Document Executive summary Introduction In July 2004, the United Nations Environment Programme (UNEP) was awarded a ...


  • Standard Chlorine of Delaware Remediation

    By designing a 70-foot deep barrier wall, Black & Veatch was able to cut off contaminant source areas from a creek near New Castle, Delaware. The groundwater treatment system that Black & Veatch designed prevents site contamination from reaching the underlying drinking water aquifer. The Standard Chlorine of Delaware Site is a 65 acre area including an abandoned chlorobenzene ...


    By Black & Veatch Corporation

  • Oil Skimmers Inc., solves a vexing dermatitis problem in a maching shop

    One portable Cart Mount System services multiple locations Concerns about dermatology in a machine shop? This sounds more like discussing ballet on the baseball field. Dermatitis is not a general complaint among grinder operators, but finding a solution to the problem was almost as tricky as finding a prima ballerina who can pitch for the majors. The safety director can't just ...


    By Oil Skimmers, Inc.

  • Plant gains efficiency by replacing vacuum-truck process

    A steel min-mill located in Portage, Ind., that produces and sells hot-rolled steel in the north central United States and Canada. The plant produces about 700,000 tons a year and employs about 400 people. On site is an electric arc furnace melt shop that produces continuous-cast steel slabs and a hot-strip rolling mill for further processing of slabs into rolled coils. The mini-mill's raw ...


    By Oil Skimmers, Inc.

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you