dry chlorine dioxide Articles

  • Sludge reduction by direct addition of chlorine dioxide into a sequencing batch reactor under operational mode of repeatedly alternating aeration/non-aeration

    The effect of direct addition of chlorine dioxide (ClO2) into a repeatedly alternating aeration/non-aeration sequencing batch reactor (SBR) on its sludge reduction and process performance was investigated. The experimental results showed that the sludge reduction efficiency was 32.9% and the observed growth yield (Yobs) of SBR was 0.11 kg VSS (volatile suspended solids) /kg COD (chemical ...


    By IWA Publishing

  • From Gas to Liquid: Large-Scale Chlorination System Conversion

    Abstract A number of wastewater treatment facilities using gas disinfection have decided to convert to liquid disinfection for several reasons including safety, regulatory, security, and economic factors. An optimal technology plan should be developed to facilitate the conversion. This presentation provides a case study of a large chlorine disinfection system, and demonstrates key issues of ...

  • Pulp and Paper Mills Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • The Use Of UV For Dechlorination

    For many years chemical disinfection techniques have been used to provide microbiologically pure water for industrial and domestic use. Free chlorine, typically introduced by municipal water treatment plants in gaseous form, has been employed for many decades as a primary oxidising agent for the control of microbiological growth. Free chlorine can also be introduced through the injection of ...

  • Cleaning mold containing surfaces

    Once a determination is made that a moldy surface can be cleaned instead of removed or demolished, what cleaning agents are effective in removing or killing the mold? Many factors influence the selection of a cleaning agent. 1). The type of surface to be cleaned: Is it porous? Hard such as cement or sheetrock? Soft, such as cloth, fabric or wallpaper? Absorbent and thick such as rugs, ...

  • Aluminum Manufacturing Industry - Pollution Prevention Guideline

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Pilot-Scale Biofilter Test for Treating Zimpro Odors

    The thermal sludge conditioning process of U.S. Filter/Zimpro Corporation, Rothschild, Wisconsin (Zimpro process) is primarily used to improve dewatering characteristics of the waste sludge. The process entails a partial breakdown through oxidation and hydrolysis of complex, high molecular weight organic compounds, such as, proteins, fibers, carbohydrates, and fats. The partial breakdown of ...


    By PRD Tech, Inc.

  • Taming taste and odor (T & O) problems in a water treatment plant

    Taming Taste & Odor (T&O) Problems Some taste and odors are caused by mineral constituents in the water, e.g. excess chlorine and hydrogen sulfide. However the majority of taste and odor are the result of biologic activity. Spring turnover of lakes and algal blooms are responsible for Blue-green algae (Cyanobacterium), Green algae and diatoms that introduce filter clogging organisms ...


    By Jenfitch, LLC

  • Biofilter Applications in the Coatings Industry.

    Soaring energy costs and the high cost of ‘end-of-pipe’ pollution control equipment has caused companies and regulatory agencies to re-evaluate ‘unconventional’ means of achieving VOC and HAP emissions control. The coatings industry is an excellent candidate for alternative, unconventional controls, as VOC and HAP reductions have not been as strident as has been the case in many other industries. ...


  • Drought Forces Push to Recycle, Reuse and Potential in Brackish Water for Oil & Gas Industry: Interview with BioLargo CEO

    UPTICK Interview: BioLargo's AOS Filter Delivers Abundant Clean Water Even In Drought The headlines are full of discussion on water shortages and drought with few options consistently noted beyond the need to conserve and manage the precious resource. To gain perspective on the problem and explore viable solutions UPTICK Newswire interviewed ...


    By Biolargo, Inc.

  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Assessment of the Environmental Impact of Military Activities During the Yugoslavia Conflict

    1. Executive Summary Assessment Method:The study was carried out over a period of ten days by a team of expert staff from the Regional Environment Center for Central and Eastern Europe (REC) and other contracted country experts. A framework was prepared by REC headquarters and the REC's country offices in the five selected countries gathered information and data. Additional ...

  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you