dry particulate dust collection system Articles

  • Dust Controlled at Source by TurboSonic Dry Fog® Suppression System

    When silica, limestone, cement, aggregate and other respirable dust particles ranging in diameter from 0.1 to 70 microns are airborne, they create a safety and health concern and an aesthetic nuisance. As a source of physical discomfort, lost materials and wear on conveying pulleys, idlers, belting and motors, such dust is a significant factor in lowered productivity and added operating and ...


  • Efficient Dust Collection, Plus Product Recovery Benefit Fertilizer Manufacturer.

    Mears Fertilizer manufactures fertilizers and packages a recovered by-product, brine, for use as “ice melt.” Collecting dry fertilizer dusts from manufacturing and packaging operations is a major operations priority. Mears had used various types of dry “bag house” equipment, but results had been unsatisfactory. For a new installation, the company was determined to avoid bag houses. The area where ...


    By Tri-Mer Corporation

  • Horween Leather: Whirl / Wet Dust Collector Combines a High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    For leather fines and other lightweight, porous materials, dry collection has been thought to be preferable to wet because of the material’s buoyancy. Horween Leather Company challenged that assumption. Originally, two baghouse systems collected particulate, but problems arose with each baghouse. First, cold winter dryness caused high levels of static electricity. Resultant sparks in the ducts ...


    By Tri-Mer Corporation

  • Hurricane HR Cyclones to Reduce Particulate Matter (PM) emissions under 75mg/Nm3 from a drying Tower of Powder Milk - Case Study

    Foreword Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Hurricane Cyclone System for Nestlé, the world’s leading nutrition, health and wellness company. Nestlé which is based in Linda-a-Velha (Oeiras, Portugal), has 4 production plants and 25 distribution centers spread across the country. ACS’s system was installed in the production plant ...

  • Hurricane HR System to Reduce Particulate Matter from a Biomass Boiler Burning Pellets Under 50mg/Nm3 - Case Study

    Foreword Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Hurricane Cyclone System for Norbidel, a Portuguese boiler manufacturer. End customer for boiler and Hurricane is Fepsa, a company that focuses its production on felts for hats. Its underlying processes involve compression and vibration, under the action of water and heat. Norbidel, based in Maia (Porto, Portugal) ...

  • Controlling Dust and Bioaerosols at a Biosolids Composting Faclity

    Studies at enclosed Longmont, Colorado project evaluate exposure level of employees. Operational changes reduce dust, endotoxin and A. Fumigatus by 90 percent. WHEN dealing with public health issues and composting, attention has been predominantly focused on potential exposure from the release of Aspergillus fumigatus (A. fumigatus) from composting facilities. Numerous studies were conducted to ...


  • Dry/Wet Scrubbers for Clean Air Compliance

    Air-scrubbing venturis and towers may be the answer to clean air compliance for small- to medium-sized companies. Forthcoming requirements of the Clean Air Act Amendments of 1990 will inventory many more specific chemicals considered hazardous. From acetaldehyde to xylenes, the list regulated under the air taxies program includes 189 hazardous air pollutants (HAPs). That number may ...


    By CR Clean Air Group, LLC

  • Recyclone MH System to Reduce Particulate Matter from a coal or palm shell BFB Boiler Flue Gas below 150mg/Nm3 - Case Study

    Foreword Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Mechanical Recyclone (Recyclone MH) for Basuki Pratama Engineering. Basuki, based in Pulogadung (Jakarta, Indonesia) is the Indonesian leading producer of non-polluting high efficiency steam boilers, as well as thermal oil heaters using fluidized bed combustor or chaingrate stoker. The installed ...

  • How a wet dust collector can prevent a violent explosion (and more!)

    Explosive dust is a major concern among metal finishing operations, and recent changes in the National Fire Protection Association regulations have made compliance more difficult. Metalwork grinding and sanding produces a fine metallic dust that, even after being filtered from the air, can smolder, catch fire, or even explode violently if it’s exposed to a spark. Aluminum, lithim, ...


    By ProVent, LLC

  • Hurricane for PM Emission Reduction from Dryer off Gases on a Wood Pellet Production Line 8074 m3/h @ 110 ◦C - Case Study

    FOREWORD Advanced Cyclone Systems, S. A. (ACS) designed a settling chamber, followed by a Hurricane system with the double purpose of dust recovery and Particulate Matter (PM) emission reduction, from a sawdust rotary dryer in an industrial wood pellets production plant with 2 ton/h capacity (VIMASOL). High quality pellets are manufactured from sawdust coming from nearby ...

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Controlling acid gas mists

    Gas cleaning New and strict pollution regulations in metallurgical plants worldwide are restricting particulate and acid gas emissions to extremely low levels. Because of that, sulphuric acid plants are being installed to remove and utilise S02 in gases resulting from the roasting of sulphide ores, smelting of ores, and burning or regeneration of spent acid or acid sludge from ...


    By Beltran Technologies, Inc.

  • Case study - AngloGold Ashanti chooses Beltran WESP

    AngloGold Ashanti Brasil Mineracao is a leading producer of gold in the world. AngloGold was working on production plans for the Cuiaba Gold Mining Expansion Project located at Nova Lima, Minas Gerasis. The plant's production capacity is projected to be equivalent to 400 metric tons of sulfuric acid per day. The Promon Company worked on the design, procurement, construction and assembly services ...


    By Beltran Technologies, Inc.

  • The Latest Technologies And Functions In Tile Floor Cleaner Machines

    Ever noticed how tile and grout seem to adore floors almost everywhere? This is primarily due to the durable nature of these floors. Tiled floors are amazingly tough and capable of resisting wear and tear. No wonder tile and grout floors are widely used in malls, hospitals, retail stores, restaurants, schools, religious institutions, and lots of other places that experience high traffic. If ...


    By Daimer Industries Inc.

  • Carpet Cleaner That You Need for Restaurant Maintenance

    Maintaining carpets is not an easy job. Due to their porous nature, carpets absorb dirt, oil, and stains really fast. When it comes to high-traffic areas such as malls, schools, retail stores, or restaurants, the tough cleaning job gets tougher. As more people walk into these places, the more dust, dirt, and stains the carpets collect. To get exceptional cleaning results, it is best to ignore ...


    By Daimer Industries Inc.

  • Why The Best Floor Steam Cleaner Machines Are Super-Powerful?

    Floor cleaning is one of the most tiresome and time-consuming tasks in commercial and industrial settings. In addition to being vast in area, the floors here experience heavy traffic and consequently accumulate lots of dirt, grease, grime, and mud. Scrubbing or mopping floors is no longer effective in maintaining sparklingly clean look at all times. For this reason, smart cleaning professionals ...


    By Daimer Industries Inc.

  • ACS installation at Glowood 100,000ton/y pellet plant achieves 12mg/Nm3 - Case Study

    With increasingly tougher restrictions on industrial air emissions, pellet manufacturers are looking to "future-proof" particulate matter (PM) compliance, cost effectively. One Portuguese producer, Glowood Indústria S.A., has recently installed a brand new type of mechanical cyclone. The most recent results show a remarkable reduction of its PM emissions, from 700mg/Nm3 to under ...

  • Case study - WESP technology provides durable solution for Brazil’s top zinc operation

    Forward-thinking metallurgical plant operators around the world constantly seek out more advanced exhaust gas recovery technologies, not only to meet increasingly strict environmental regulations, but also to achieve superior operating performance and to control maintenance and other costs in a competitive marketplace. One fully-integrated polymetal producer headquartered in Brazil has managed to ...


    By Beltran Technologies, Inc.

  • Coke Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Wastewater Reuse and Minimisation: Weatherall Smash Repairs

     Weatherall Smash Repairs took the initiative on cleaner production because the owner and staff wanted to help the environment. They’ve been rewarded with savings that will grow as water and disposal costs continue to increase, gains in productivity, and a future marketing advantage. They may also be able to sell the water recycling system they have developed, giving a further financial ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you