duct cleaning Articles

  • On Choosing The Right Hood And Duct Cleaning Machines

    The cleaning requirements in different commercial settings vary according to the kind of work being conducted. For instance, the cleaning needs in an automobile assembling unit will be entirely different from those of a food processing plant. While the car assembly unit will need cleaning machines to eliminate mud, grease, and lots of dust, a food processing plant demands machines ...


    By Daimer Industries Inc.

  • Clearing the air on “free Air CFM” - Specs for portable duct cleaning vacuums

    Many times when researching equipment for duct cleaning vacuums you will find manufacturers posting the CFM suction ratings on their vacuums as “Free Air” or “bench Test”. The Free air test is the rating on the impeller wheel of the vacuum, simply put it is the maximum amount of airflow the impeller can produce with out any restriction. It seems as though many ...


    By Hypervac Technologies

  • Ducted or Ductless Fume Hoods? Is this the real issue?

    Most laboratories will need some form of fume cabinet at some point. The type of cabinet is usually the starting point of the process, and the choice of either ductless or ducted cabinet is made. With the ever increasing need to save money and to be environmentally responsible there are other considerations that need to be explored before a decision can be reached. ...


    By Camlab Limited

  • The Right Mix for Clean Air

    Reducing air pollution is an increasingly important topic all around the world. Many governments—also in developing countries—set new limits for emissions such as nitrogen oxides in flue gas. Sulzer offers advanced mixing technology for flue gas cleaning. The installation in a large power plant shows that these high-performance mixers can cope with the most difficult requirements. ...


    By Sulzer

  • Controlling Bacteria In a Clean Room Environment

    Maintaining the integrity of a cleanroom is a constant battle. The first step to deciding which method, or combination of methods, to employ is to identify the prime sources of contamination. There are three prime sources of contamination through which the integrity of a cleanroom might be breached. First, there is the human element. While many processes might be automated, many situations remain ...


    By GVS Filter Technology

  • Inland oil spill clean up case study

    Introduction The essential strategy for inland spill clean up techniques should be containment, recovery and temporary storage. Secondary needs will include transportation and possible disposal - or recycling. It is important to discover the source of the spill which might not be straight forward. A steady slow seepage from a leaking disused oil storage tank may be very difficult ...

  • OSE II economic comparison to dispersants and mechanical Clean ups

    INTRODUCTION   Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment. In comparison, current response methods employed by three major oil companies - BP, Exxon ...

  • Case study - Rubber curing emissions

    Overview A rubber curing company was looking for a new, affordable abatement solution to treat their blue haze and low-level Volatile Organic Compounds (VOCs) in order to meet regulatory requirements. The large Electrostatic Precipitator (ESP) in use was extremely expensive to operate and maintain. The company began their search for a system that offered effective opacity control and ...

  • QUADRANT SRS Thermal Oxidizer replaces silicone-contaminated system

    A Silicone Tape Converter recently replaced a poorly designed thermal oxidizer with a custom engineered thermal oxidizer designed by Catalytic Products International, Inc. The process coated film with a silicone based adhesive. The silicone vaporizes with other VOC’s in the drying process and is ducted to the thermal oxidizer. The combustion process converts the silicone vapors to a powder ...

  • TopAir`s Fume Hood

    TopAir, Statitech Israel’s flagship brand, manufactures a full line of superior cleanroom equipment including a reliable fume hood for neutralizing potential airborne chemical hazards in the laboratory. The fume hood mechanism offers maximum protection to laboratory staff working at a cleanroom table under the fume hood.   There are two basic types of fume hood. Many industries use a ...


    By TopAir Systems

  • Vertical Flow Fume Scrubbers are Suitable for Chemical Producers, Metal Finishing, Semiconductor Manufacturing and Other Operations Generating Fumes and Gases.

    Tri-Mer fume hoods are manufactured for process and laboratory use. Tri-Mer fume hoods are ideally suited for corrosive or volatile exhausts. Construction materials include polypropylene, PVC, mild or stainless steel and high-alloy materials. Standard features include a low maintenance design, 110V power operation and minihelic exhaust gauge. Fume hoods can be equipped with activated carbon or ...


    By Tri-Mer Corporation

  • How a HEPA Filter Makes the Best Steam Cleaner Even Better

    When looking for the best steam cleaner for hospitals, hotels, and other commercial areas, it’s important to look for units that have vacuum extraction capabilities as well. Ordinary steam cleaning units can soften and dissolve a range of tough deposits and stains. But it’s up to the user to manually wipe up the slurry that is left behind. This can be a relatively easy task when ...


    By Daimer Industries Inc.

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By DiversiTech

  • Safe House?

    A client who had lived in her house for more than ten years was concerned that her son who suffers from certain inflammation problems might be affected by poor air quality. Investigation: The home is a well maintained twenty year old two story house with a forced hot air heating system with same duct central air. The HVAC system incorporated a merv 6 air filter with an ultra violet ...


    By Healthy Air Cape Cod

  • DGTH Produktions GmbH Germany – case study

    OVERVIEW DGTH is a leading supplier of zinc die-casting components for the automotive industry. WATER SYSTEM CHALLENGES Cooling tower water is used for the cooling of the tools. As makeup water for the cooling tower circuit, DGTH uses a blend of city water with approx. 14° carbonate hardness and rain water. Due to the jellification in the ...

  • Custom welding booth and downdraft tables remove fumes in learning center

    Monoxivent partnered with S.J. Smith Co. to provide custom welding booths and downdraft tables to remove toxic welding fumes.  S.J. Smith is a regional welding distributor that actively promotes the Monoxivent product line. An international manufacturer wanted to construct a welding school in their facility where current employees could learn new technologies, as well as update skills. The ...


    By Monoxivent

  • A cost-effective method for controlling compost air emissions

    In October 2007, ECS began conducting trials at California State University Fresno (CSUF) to explore using the new patent pending AC Composter (ACC) covered aerated static pile system to manage dairy manure solids and comply with airquality standards. A two-zone portable pilot system was delivered by ECS and installed at the CSUF research dairy. This research is being conducted under a Phase I ...


    By Engineered Compost Systems

  • The Use of Particulate Emission Monitors to Support Arrestment Plant Operation and Upkeep

    The operation of filtration type arrestment plant can be optimised by the effective use of Particulate Emission Monitors (eg Filter Leak Monitors and Filter Performance Monitors). Particulate Emission Monitors are installed throughout the broad spectrum of industrial processes to satisfy regulations (IPPC, Part B Guidance Notes, WID and LCPD) for emission limit enforcement. In addition, where ...


    By PCME Ltd

  • Case study - RheTech

    Six years after installation, the Smart Elbow® has provided years of maintenance free production and still eliminates streamers. It's been close to five years since HammerTek did a case study on the 120 Smart Elbows® installed at RheTech, Inc.'s Whitmore Lake, Michigan plant. That first case study presented the drastic difference in how operations had changed after the June 1997 ...


    By HammerTek Corporation

  • Pros & Cons of Remediation Structures with Chinese Drywall

    Mr. Mulholland addresses pros and cons of the four main approaches to remediation of structures with Defective (Chinese) Drywall. There are many methods or approaches to remediation practices in the construction industry. The current crisis with defective Chinese drywall that is diffusing low levels of sulfur compounds like hydrogen sulfide, carbonyl sulfide, carbon disulfide and others creates a ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you