duct cleaning equipment Articles

  • On Choosing The Right Hood And Duct Cleaning Machines

    The cleaning requirements in different commercial settings vary according to the kind of work being conducted. For instance, the cleaning needs in an automobile assembling unit will be entirely different from those of a food processing plant. While the car assembly unit will need cleaning machines to eliminate mud, grease, and lots of dust, a food processing plant demands machines ...


    By Daimer Industries Inc.

  • Clearing the air on “free Air CFM” - Specs for portable duct cleaning vacuums

    Many times when researching equipment for duct cleaning vacuums you will find manufacturers posting the CFM suction ratings on their vacuums as “Free Air” or “bench Test”. The Free air test is the rating on the impeller wheel of the vacuum, simply put it is the maximum amount of airflow the impeller can produce with out any restriction. It seems as though many ...


    By Hypervac Technologies

  • Controlling Bacteria In a Clean Room Environment

    Maintaining the integrity of a cleanroom is a constant battle. The first step to deciding which method, or combination of methods, to employ is to identify the prime sources of contamination. There are three prime sources of contamination through which the integrity of a cleanroom might be breached. First, there is the human element. While many processes might be automated, many situations remain ...


    By GVS Filter Technology

  • Inland oil spill clean up case study

    Introduction The essential strategy for inland spill clean up techniques should be containment, recovery and temporary storage. Secondary needs will include transportation and possible disposal - or recycling. It is important to discover the source of the spill which might not be straight forward. A steady slow seepage from a leaking disused oil storage tank may be very difficult ...

  • WSSA Pesticide Stewardship Series: Always Be Diligent Concerning Personal Protective Equipment

    This month pesticide safety educators, health professionals and other experts from around the U.S. will explore how to motivate pesticide handlers to use best practices concerning personal protective equipment (PPE). The discussion is part of a Pesticide PPE Seminar Series sponsored by the National Institute for Occupational Safety and Health (NIOSH). PPE includes apparel and devices worn to ...


    By PRWeb

  • OSE II economic comparison to dispersants and mechanical Clean ups

    INTRODUCTION   Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment. In comparison, current response methods employed by three major oil companies - BP, Exxon ...

  • Case study - RTO: Efficient emission - Working with your pollution control equipment supplier can lead to reductions in both emissions and operating cost

    Untitled Document Robbie Manufacturing of Lenexa , KS is a leader in the production of printed shrink films, bags and pouches for a diverse range of demanding applications. In 2004 alone, the company was awarded a Good Buy award from Good Housekeeping magazine, achieved rigorous American Institute of Baking (AIB) certification and the highest award ( Best-in-Show for Wide Web ) possible from the ...

  • Case study - Rubber curing emissions

    Overview A rubber curing company was looking for a new, affordable abatement solution to treat their blue haze and low-level Volatile Organic Compounds (VOCs) in order to meet regulatory requirements. The large Electrostatic Precipitator (ESP) in use was extremely expensive to operate and maintain. The company began their search for a system that offered effective opacity control and ...

  • Vertical Flow Fume Scrubbers are Suitable for Chemical Producers, Metal Finishing, Semiconductor Manufacturing and Other Operations Generating Fumes and Gases.

    Tri-Mer fume hoods are manufactured for process and laboratory use. Tri-Mer fume hoods are ideally suited for corrosive or volatile exhausts. Construction materials include polypropylene, PVC, mild or stainless steel and high-alloy materials. Standard features include a low maintenance design, 110V power operation and minihelic exhaust gauge. Fume hoods can be equipped with activated carbon or ...


    By Tri-Mer Corporation

  • TopAir`s Fume Hood

    TopAir, Statitech Israel’s flagship brand, manufactures a full line of superior cleanroom equipment including a reliable fume hood for neutralizing potential airborne chemical hazards in the laboratory. The fume hood mechanism offers maximum protection to laboratory staff working at a cleanroom table under the fume hood.   There are two basic types of fume hood. Many industries use a ...


    By TopAir Systems

  • Pros & Cons of Remediation Structures with Chinese Drywall

    Mr. Mulholland addresses pros and cons of the four main approaches to remediation of structures with Defective (Chinese) Drywall. There are many methods or approaches to remediation practices in the construction industry. The current crisis with defective Chinese drywall that is diffusing low levels of sulfur compounds like hydrogen sulfide, carbonyl sulfide, carbon disulfide and others creates a ...

  • Case study - RheTech

    Six years after installation, the Smart Elbow® has provided years of maintenance free production and still eliminates streamers. It's been close to five years since HammerTek did a case study on the 120 Smart Elbows® installed at RheTech, Inc.'s Whitmore Lake, Michigan plant. That first case study presented the drastic difference in how operations had changed after the June 1997 ...


    By HammerTek Corporation

  • Case study - Bakery ethanol

    Overview A bread and bun bakery was faced with installing air pollution control equipment to control the volatile organic compounds (VOCs) emitted during their baking process. The local regulatory agency requires bakeries that generate over 25 tons of ethanol per year to reduce emissions by 95% by installing control devices on their ovens. The airstream that needed to be treated included ...

  • Engineering Expertise for a Diamond Mine in Canada`s Far North

    When Fabricated Plastics Limited of Maple, Ontario was invited to quote on some work for a diamond mining company in Canada's North West Territories, they were naturally intrigued by such a high interest project. The world of diamonds immediately conjures up exciting thoughts of exotic locations and immense wealth. In fact, the long, complex and arduous task of identifying diamond deposits, the ...


    By Fabricated Plastics Limited

  • Industrial furnace - US Government - Industrial furnace & thermal oxidizer with 2 heat exchangers

    The Problem The US Government had a need to decommission old bombs. They went to TVA, and TVA came to Epcon for a unique solution. There were 2 issues: Decontaminate the old shells What to do with the pollution In addition, because of the residual explosive charge in the bomb shells, it was imperative that the heating system was very safe, such ...


    By Epcon Industrial Systems, LP

  • Holcim Ste. Genevieve Cement Plant - Case Study

    Big and beautiful The new cement manufacturing facility of Holcim (US) at Ste. Genevieve with a production capacity of four million tonnes per year went on stream mid-2009 and is one of the most environmentally-efficient cement plants in the Holcim Group. It is 40 percent more energy-efficient than the Holcim (US) plants that were closed in 2009 and emits 10 to 25 percent less ...

  • Environmental incident response, North-East England

    Project Remediation Strategies were requested to attend a manufacturing facility in North-East England following an overnight fire at the site. Fire-fighting operations and the site sprinkler system had created a large volume of contaminated run-off together with widespread flooding across the shop floor area of the manufacturing facility. Productivity was stopped across the ...


    By Remediation Strategies Ltd.

  • Summarizing the fundamentals of fugitive emission tracking

    Fugitive emission tracking for a number of key industries is now a focus for the United States and a number of other countries. When a hazardous leak occurs it is important to identify and gauge the amount and type of substance emitted. Officials will gain a better understanding of the challenge posed by greenhouse gases, as they affect global warming. When an unexpected leak of a hazardous ...


    By Verisae

  • Dialysis with a semipermeable membrane – a new sample-preparation technique for determination of Polybrominated Diphenyl ethers in fatty matrices

    Summary Dialysis with a low-density polyethylene semipermeable membrane (SPM) is an efficient means of removal of lipids in the determination of bioaccumulative, persistent, halogenated organic compounds. In this study an SPM was used for preconcentration of polybrominated diphenyl ethers (PBDE) from food samples. The method is useful for determination of PBDE and other halogenated ...


    By Exposmeter AB

  • Improve Slurry Pump Working Life

    Close suction valve before stopping slurry pump. Enough clean water should be supplied to pump all the slurry in pipeline out to avoid solid precipitated in the suction tube and volute line. Otherwise, there will be situations that ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you