dust collection system Articles

  • Dust Collection Booths Defined

    Dust collection booths are important tools that have an important function in the conservation of your workplace. This article gives you a brief description of what dust collection booths are and how they can help you maintain the sanitation of your workplace. How They Work Dust collection booths work exactly ...


    By ProVent, LLC

  • Dust collection dilemma: ostrich egg dust

    Rick Peil from the Toolking Superstore was presented with an interesting dust collection dilemma. Tamera Seevers creates unique fine art out of ostrich eggs (www.tameraseeversstudio.com). Carving and finishing the ostrich eggs takes up to three months and creates a very fine, ostrich egg dust. Her problem was with her 1-micron bag on the dust collection system, the dust was still escaping into ...


    By American Fabric Filter Co

  • The Different Kinds of Dust Collection Booths

    Factories that produce heavy dust particles require a dust collector system in place, so employees can breathe in clean and pure air at all times. Also, with one of these systems in place, machinery functions well and lasts longer. Dust collection booths also help limit dust into a closed area and safely trap it inside a closed space for ...


    By ProVent, LLC

  • How to Avoid Undersizing a Dust Collection System

    Baghouse manufacturers often recommend undersized systems to undercut others for your business. How can you avoid buying a undersized baghouse that won't work?  Dust collector OEMs constantly try to come in with bids lower than competitors. In an attempt to do so, some baghouse manufacturers offer undersized systems. One recent experince highlights the dangers of allowing manufacturers' ...


    By Baghouse.com

  • Dust collection system captures fugitive dust, ensures OSHA compliance case study

    West Coast Cosmetics, Chatsworth, Calif., a contract filler and private label house, manufactures and packages custom cosmetic products such as eye shadow, blush, mascara, lipstick, foundation, and others. In spring 2003, OSHA inspected the company’s plant and told the company it needed to install a dust collection system to remove fugitive dust from the plant’s compounding and ...


    By Scientific Dust Collectors

  • Here’s What I Know About Dust Collection Booths

    If there is too much dust in the workplace, it can cause many problems and the most serious is the short and long term health problems. Not only does dust make the place all messy and dusty, but also means you and your employees are breathing in harmful particles. The problems usually start off by allergic reactions and can turn into major respiratory problems. Also, a large amount of dust at ...


    By ProVent, LLC

  • Whirl/Wet Dust Collectors Preferred for Pharmaceutical Overspray Collection

    A major multi-national manufacturer of pharmaceuticals and vaccines chose Whirl Wet technology for a new pill coating operation. The aqueous-based sugar solution created heavy loadings of sticky overspray in the 3 micron range. This blinded the existing baghouses after just six batches despite the use of PTFE cartridges – (the best available option for baghouses used in this type of application.) ...


    By Tri-Mer Corporation

  • Efficient Dust Collection, Plus Product Recovery Benefit Fertilizer Manufacturer.

    Mears Fertilizer manufactures fertilizers and packages a recovered by-product, brine, for use as “ice melt.” Collecting dry fertilizer dusts from manufacturing and packaging operations is a major operations priority. Mears had used various types of dry “bag house” equipment, but results had been unsatisfactory. For a new installation, the company was determined to avoid bag houses. The area where ...


    By Tri-Mer Corporation

  • Horween Leather: Whirl / Wet Dust Collector Combines a High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    For leather fines and other lightweight, porous materials, dry collection has been thought to be preferable to wet because of the material’s buoyancy. Horween Leather Company challenged that assumption. Originally, two baghouse systems collected particulate, but problems arose with each baghouse. First, cold winter dryness caused high levels of static electricity. Resultant sparks in the ducts ...


    By Tri-Mer Corporation

  • To prevent blinding in dust collection systems, consider filter type, filter size and selection of the filter media used

    All dust collection systems, regardless of size, share a common problem—dust blinding. Simply stated, blinding is defined as when dust particles plug the holes in a filter and stop the flow of air through the filter, resulting in the dust collector performing poorly. All types of collectors, whether stand-alone units, cyclones or full-scale baghouses, are subject to blinding. To better ...


    By American Fabric Filter Co

  • Submicron Particulate Collection

    “The trend in dust or particulate collection is to treat smaller particles,” concurs Rod Gravley, Technical Director, CCS systems at Tri-Mer Corp. (Owosso, Mich.).  Gravley expects ...


    By Tri-Mer Corporation

  • Dixie Cut Stone & Marble: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    Dixie Cut Stone & Marble finishes Indiana limestone for the dimensional stone industry. Dixie management wanted 'best available' dust control technology to maximize both ergonomic and housekeeping benefits. Tri-Mer supplied two Whirl/Wet units with top-mounted blowers. Collected material is discharged manually after settling. The system operates with minimal water consumption and consumes ...


    By Tri-Mer Corporation

  • Erickson Cosmetics: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    Production was accelerating at Erickson Cosmetics, a Chicago-based maker of talc and cornstarch-based products for the Mennen Division of Colgate-Palmolive and other companies. The 320,000 sq. ft. plant is highly automated and, while the primary powder line operated within regulatory guidelines for dust control, Todd Nelmark believed there were strong reasons to consider automatic dust ...


    By Tri-Mer Corporation

  • Understanding the dangers of combustible dust

    Paper shredding is growing into a big business. Recycling and the green movement certainly planted the seeds, but regulators have added the fertilizer. Industry-changing laws have been passed to govern document security in accounting, healthcare and banking, and shredders of many varieties are becoming the tools of those trades.Five or six years ago Warde Comeaux knew only a few people who ...

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

  • The Function and Purpose of Portable Dust Collectors

    Portable dust collectors are movable devices that are useful to decrease and collect contaminant substances from the air in your work environment, producing units and plants. Portable dust collectors are small devices and portable, which means they can easily be transferred from place to place. Structure The ...


    By ProVent, LLC

  • Wet Dust Collectors: Options and Operations

    A wet dust collector comes in the choice of three variations and these are: gas/liquid contact, gas/liquid separation and gas humidification. The difference between the three is based on how the dust is collected and separated inside the system. A wet dust collector, also known as a wet scrubber, ...


    By ProVent, LLC

  • Vacuuming Wood Dust Can be Hazardous

    It’s well known that wood dust is highly combustible, but the practice of removing it with vacuum trucks can also be dangerous, because of the potential buildup of static electricity. WorkSafeBC has issued a bulletin stating that “static electricity discharges can ignite wood dust and therefore must be eliminated or adequately controlled during vacuuming.” When wood dust or ...


    By SafetySmart

  • Effective Industrial Dust Collector Strategies

    Finding the correct type of industrial dust collector for the grinding section is a must for opposing an injection mold creating shop. This is vital for health and welfare of workers and for the performance of grinding machines. Dusts produced from electrodes are graphite and copperand during the milling or grinding operation, these needs to be filtered away from the atmosphere with an ...


    By ProVent, LLC

  • Central system to capture grinding & deburring dusts case study

    The Problem Sputtek Inc. is a metal working company based in Toronto, Canada and manufactures metal parts needing to be deburred, polished, and cleaned before they can be used. These parts are varied in size depending on the project and the client insisted on the collection of all dust for reasons of employee safety and shop cleanliness.   The Solution A ...


    By DiversiTech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you