dust collector manufacturer Articles

  • Whirl/Wet Dust Collectors Preferred for Pharmaceutical Overspray Collection

    A major multi-national manufacturer of pharmaceuticals and vaccines chose Whirl Wet technology for a new pill coating operation. The aqueous-based sugar solution created heavy loadings of sticky overspray in the 3 micron range. This blinded the existing baghouses after just six batches despite the use of PTFE cartridges – (the best available option for baghouses used in this type of application.) ...


    By Tri-Mer Corporation

  • Efficient Dust Collection, Plus Product Recovery Benefit Fertilizer Manufacturer.

    Mears Fertilizer manufactures fertilizers and packages a recovered by-product, brine, for use as “ice melt.” Collecting dry fertilizer dusts from manufacturing and packaging operations is a major operations priority. Mears had used various types of dry “bag house” equipment, but results had been unsatisfactory. For a new installation, the company was determined to avoid bag houses. The area where ...


    By Tri-Mer Corporation

  • Choosing a Cyclone Collector

    CYCLONE COLLECTORS Many of us have seen the large funnel shaped mass of metal sitting outside of a manufacturing facility, school or processing plant. These are cyclone dust collectors and they come in many shapes and sizes. If you are curious how they work or are wondering which one will be the right one for your process, read on. HOW THEY WORK Cyclone dust ...


    By ProVent, LLC

  • Dust collection dilemma: ostrich egg dust

    Rick Peil from the Toolking Superstore was presented with an interesting dust collection dilemma. Tamera Seevers creates unique fine art out of ostrich eggs (www.tameraseeversstudio.com). Carving and finishing the ostrich eggs takes up to three months and creates a very fine, ostrich egg dust. Her problem was with her 1-micron bag on the dust collection system, the dust was still escaping into ...


    By American Fabric Filter Co

  • Surrette Battery Co. Replaces Baghouse with Whirl Wet Dust Collector for Pasting Operation.

    Surrette Battery Company Limited, Springhill, Nova Scotia is a leading lead-acid battery manufacturer, and Canada's only independent battery manufacturer. The battery company manufactures long-life, true 'deep cycle' battery systems for railroad, marine, industrial and renewable energy applications. Surrette Battery wanted a corrosion-free system that would withstand acid fumes from a paste mixer ...


    By Tri-Mer Corporation

  • Understanding the dangers of combustible dust

    Paper shredding is growing into a big business. Recycling and the green movement certainly planted the seeds, but regulators have added the fertilizer. Industry-changing laws have been passed to govern document security in accounting, healthcare and banking, and shredders of many varieties are becoming the tools of those trades.Five or six years ago Warde Comeaux knew only a few people who ...

  • The Important Job of Oil Mist Collectors

    The majority of business owners whose manufacturing process requires machinery that uses coolants, lubricants, or oils know how vital it is to keep the spray or mist released, during the operation from collecting on walls, ceilings or floors as much as possible. Emissions that are uncollected, can lead to slippery surfaces and an unhealthy working environment, which is why an  ...


    By ProVent, LLC

  • Manufacturing facility cleaning case study

    The Challenge A large Industrial manufacturing facility found that their process used to perform the necessary tasks was creating an undesirable accumulation of heavy metals dust throughout the entire plant. Not only was this a potential health risk to the plant workers, there was a structural and safety problem because the dust could spark and cause a fire or explosion. ...


    By Enviro-Vac Corp.

  • How to Avoid Undersizing a Dust Collection System

    Baghouse manufacturers often recommend undersized systems to undercut others for your business. How can you avoid buying a undersized baghouse that won't work?  Dust collector OEMs constantly try to come in with bids lower than competitors. In an attempt to do so, some baghouse manufacturers offer undersized systems. One recent experince highlights the dangers of allowing manufacturers' ...


    By Baghouse.com

  • How To Avoid Dust Explosions In Your Baghouse

    A massive fire and explosion in the dust collection system of a New Hampshire wood pellet manufacturer demonstrates the need for adequate system design to prevent combustible dust explosions in general industry.  We recently published a news article on Environmental-Expert.com about OSHA’s enforcement actions concerning last year’s combustible dust fire and explosion at the ...


    By Baghouse.com

  • Dust collection system captures fugitive dust, ensures OSHA compliance case study

    West Coast Cosmetics, Chatsworth, Calif., a contract filler and private label house, manufactures and packages custom cosmetic products such as eye shadow, blush, mascara, lipstick, foundation, and others. In spring 2003, OSHA inspected the company’s plant and told the company it needed to install a dust collection system to remove fugitive dust from the plant’s compounding and ...


    By Scientific Dust Collectors

  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • GM-Delphi: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs

    Tri-Mer® dust collection technology has once again been selected by GM-Delphi. Four units were selected as replacements for dry collectors. Each unit serves four grinding (or shot blasting) stations. Capacities range from 425 to 52,500 cubic ft./minute. The units will accommodate very heavy loadings under continuous use, and allow regular maintenance without interrupting production. Equally ...


    By Tri-Mer Corporation

  • Improve performance by installing a larger filter bag

    YOU MIGHT NOT NEED a more powerful dust collector after all. That’s the word from woodworkers who’ve replaced the original equipment filterbags on their collectors with bags that are more efficient. You might ask, “What can be more efficient than the 1 micron bag that came with my collector?” The answer is a 1 micron bag that’s properly sized for your machine and ...


    By American Fabric Filter Co

  • New Nozzle Technology “Cleaning More with Less”

    This technical paper will explain the new nozzle technology developed by Scientific Dust Collectors that allows high air-to-cloth ratio baghouses to use 80psig of compressed air instead of the industry standard 100psig.   The reverse pulse jet baghouse has been around for over 50 years and the cleaning cycle has not changed very much during that time. The cleaning cycle is the most important ...


    By Scientific Dust Collectors

  • Custom welding booth and downdraft tables remove fumes in learning center

    Monoxivent partnered with S.J. Smith Co. to provide custom welding booths and downdraft tables to remove toxic welding fumes.  S.J. Smith is a regional welding distributor that actively promotes the Monoxivent product line. An international manufacturer wanted to construct a welding school in their facility where current employees could learn new technologies, as well as update skills. The ...


    By Monoxivent

  • Whirl/Wet Is Ideal for Polishing Operations. Water Use Is Low. Unit Does Not Have External Pumps or Recirculation Systems, So Installation Out-of-Doors Is Possible.

    Gabilan Manufacturing, Inc. (Salinas, CA) produces all the mufflers used on Harley Davidson motorcycles. Quality is paramount: the polishing is preparation for chrome plating – arguably the most critical finishing process for high-end bikes. When new grinding and sanding equipment was installed, Gabilan considered several options for dust collection, finally choosing a cartridge system with spark ...


    By Tri-Mer Corporation

  • Abrasives case study - Essroc Materials, Inc.

    Plugging, Surging and Wear-Through Virtually Eliminated by Smart Elbows® At Essroc Materials, Inc., formerly Coplay Cement, plugging and elbow wear in pneumatic conveying lines caused unnecessary downtime and repair expense. The Frederick, MD, facility is a wet-process cement plant that produces 350,000 to 400,000 tons of cement a year using two 400-foot-long rotary ...


    By HammerTek Corporation

  • Asbestos contaminated soil case study

    An active gypsum manufacturing facility discovered they had a large area of gypsum waste containing asbestos mixed with soil at the back of their property. The waste had accumulated over the years before the dangers of asbestos were known and now required remediation due to communication wires buried in the waste. Excavators could not be used due to the presence of the communication wires that ...


    By Enviro-Vac Corp.

  • Plastics case study - Schmalbach-Lubeca

    Schmalbach-Lubeca operates 24 hours a day, 7 days a week, manufacturing millions of plastic bottles each day for the beverage industry. With a total of 63 plants worldwide, 17 locations are within the United States. The Blythewood, South Carolina location was using long radius elbows to convey PET Poly Pellets from the rail car to the silo, and from the silo to the molding operation. "Streamers" ...


    By HammerTek Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you