dust containment problem Articles

  • How an Industrial Dust Collector Fixes Sawdust Problems

    Saw dust and wood dust are potential problems in all woodworking settings. Woodworking environments will always have wood and wood dust shavings, which can lead to many health and fire dangers. What Is Wood Dust? Wood dust is categorized as a particulate airborne pollutant. A precious tool like ...


    By ProVent, LLC

  • Algae Problems

    Almost everywhere where water is being stored, algae problems may occur. When water is stagnant, has a high temperature or a high concentration of Nitrates and Phosphates, an algae bloom might occur, which can cause several problems. Blue-green algae growth can cause a foul odour to the water, a layer of scum on the surface and even pose a health risk. Green algae may colour the water green, look ...


    By LG Sonic

  • The Nitty-Gritty of Dust Control

    Landfill owners and operators spend a lot of time focusing on containment: containment of waste; containment of leachate; containment of gas, litter, and odors. Quite often, containment of dust ranks near the bottom of the list. But that doesn’t lessen the importance of dust control. ...


    By Blue Ridge Services, Inc.

  • Down with road dust

    There are more than 3.9 million miles of roadway in the United States, according to the Federal Highway Administration, and, depending on the area of the country you're in, as much as 70% of that road mileage is unpaved. The 1997 U.S. Environmental Protection Agency (EPA) National Air Quality and Emissions Trends Report states that those unpaved roads--which can cover a wide range of ...


    By Cypher Environmental Ltd.

  • The invisible fine dust

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous. According to a current study conducted by the Max Planck Society, ...

  • Understanding the dangers of combustible dust

    Paper shredding is growing into a big business. Recycling and the green movement certainly planted the seeds, but regulators have added the fertilizer. Industry-changing laws have been passed to govern document security in accounting, healthcare and banking, and shredders of many varieties are becoming the tools of those trades.Five or six years ago Warde Comeaux knew only a few people who ...

  • Reducing the risk of dust explosion hazards

    In the wake of recent tragic and highly publicized dust explosions, companies are asking, 'Could that happen here?' and 'What can I do to prevent such an incident at my facility?' One approach is to manage dust explosion hazards as though they were subject to OSHA’s Process Safety Management (PSM) requirements (29 CFR 1910.119), even though dust hazards often are not covered under this ...


    By ABS Consulting

  • EP Dust collections manufacturing case study

    Client: Sodexo FM- Pilkington plc Location: Greengate Works, St Helens Date: Ongoing Sector: Manufacturing About the Project: GPT were contacted by the client following the set-up of a new manufacturing process on site. This resulted in the production of a new waste stream, the exact composition of ...


    By GPT Waste Management Ltd

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

  • Dust collection system captures fugitive dust, ensures OSHA compliance case study

    West Coast Cosmetics, Chatsworth, Calif., a contract filler and private label house, manufactures and packages custom cosmetic products such as eye shadow, blush, mascara, lipstick, foundation, and others. In spring 2003, OSHA inspected the company’s plant and told the company it needed to install a dust collection system to remove fugitive dust from the plant’s compounding and ...


    By Scientific Dust Collectors

  • Reduction in Airborne Dust and Cleaning Costs: Sale of Waste Limestone Dust - Blue Circle Southern Cement, Limestone Mine

    Background The Marulan South limestone mine is part of the Blue Circle Southern Cement company. It is situated on the edge of the Shoalhaven River gorge adjoining the Morton National Park 380 km south west of Sydney. The company supplies limestone to cement plants at Berrima and Maldon as well as the BHP steelworks at Port Kembla. The mine has a total production of three ...


  • Well suited for dust and waste products from airlaid production

    Less dust, easier handling and reduced transport costs. The RUNI Screw Compactor represents a great advance in airlaid production waste management. Dan-Web in Aarhus produces machinery and equipment for the manufacture of airlaid products such as nappies, sanitary towels, bed sheets and meat pads – primarily as turn-key production systems. The company has its own pilot system for client ...


    By RUNI A/S

  • Air pollution control through kiln recycling by-pass dust in a cement factory

    Over the centuries, air pollution has increased from a local nuisance to a global problem (Emberlin 1998). Cement industry is one of the most important and strategic industries in Iran. However, its air pollution has been a serious problem. The primary related pollution is dust, which industrial countries have allocated tremendous efforts in reducing its volume. Dust in different stages of a ...


    By University of Tehran

  • Dust Controlled at Source by TurboSonic Dry Fog® Suppression System

    When silica, limestone, cement, aggregate and other respirable dust particles ranging in diameter from 0.1 to 70 microns are airborne, they create a safety and health concern and an aesthetic nuisance. As a source of physical discomfort, lost materials and wear on conveying pulleys, idlers, belting and motors, such dust is a significant factor in lowered productivity and added operating and ...


  • Waste management solutions for the manufacturing sector – EP Dust Collection Case Study

    GPT Waste Management Limited is the UK’s leading independent provider of waste management solutions to both the public and private sector. GPT were contacted by the client following the set-up of a new manufacturing process on site. This resulted in the production of a new waste stream, the exact composition of which was unknown. ...


    By GPT Waste Management Ltd

  • Automated Handling of Activated Carbon in Bulk Bags Reduces Dust and Labor for Municipal WTPs

    Two cities, one in the United States and the other in Canada, over 700 miles (1100 km) apart, were experiencing nearly identical problems caused by manual addition of powdered activated carbon to their municipal water treatment systems. Both cities not only eliminated a health hazard caused by carbon powder dust, but also reduced the amount of labor required to add powdered activated carbon to ...


    By Flexicon Corporation

  • Aeolian dust in sediment: a re-examination of methods for identification and dispersal assessed by diffuse reflectance spectrophotometry

    Analyses of aeolian sediments present two main challenges: (1) when aerosol particles are collected on atmospheric filters, only a small amount of aeolian material is normally present, and (2) in these and other samples, the aeolian sediment is typically mixed with other types of particles and the aeolian material often makes up only a small percentage of the total sample. Diffuse Reflectance ...


    By Inderscience Publishers

  • Boeing - deburring tables solution case study

    Problem Bombardier is a worldwide manufacturer of commercial and private aircraft. The Learjet repair and rework facility in Tuscon Arizona approached Diversi-tech for a dust control solution in their composite sanding area. The client wanted to protect the workers by having the dust removed before it could be inhaled or cross contaminate other parts. Diversitech visited the facility, ...


    By DiversiTech

  • Installation of Sanding Area with Downdrought Floor: Bignell Panel Repairs

     Background Bignell Panel Repairs Pty Ltd (BPR) is a medium sized paint and panel shop employing 10 staff. In the paint and panel industry, paint dust has always been a problem. It not only impairs the quality of the paint finish but also causes environmental and health problems. Dust contains heavy metals and toxins which cause respiratory illnesses. It is easily entrained in ...


  • Ineffective cleaning in generic baghouses

    ABSTRACT: Background In a typical “generic” baghouse application, the cleaning is accomplished by back-flushing the filter with compressed air that travels through an orifice hole in a purge tube (blow pipe) and through a venturi. A typical generic cleaning system allows dust to be filtered at an air-to-cloth ratio of 5:1. That means for every 5 CFM of airflow, there is 1 square foot ...


    By Scientific Dust Collectors

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you