dust control misting Articles

  • Controlling acid gas mists

    Gas cleaning New and strict pollution regulations in metallurgical plants worldwide are restricting particulate and acid gas emissions to extremely low levels. Because of that, sulphuric acid plants are being installed to remove and utilise S02 in gases resulting from the roasting of sulphide ores, smelting of ores, and burning or regeneration of spent acid or acid sludge from ...


    By Beltran Technologies, Inc.

  • Recent Federal Developments

    TSCA/FIFRA EPA Extends Comment Period For Draft Guidance For Pesticide Registrants On Notifications, Non-notifications, And Minor Formulation Amendments: On October 5, 2017, the U.S. Environmental Protection Agency (EPA) issued a notice of extension of the comment period for the draft guidance  ...


    By Bergeson & Campbell, P.C.

  • Winterizing Your Misting System

    The cooler weather brings with it the change of seasons, holiday festivities and an end to summer outdoor activities. This means that your misting system will need to be properly winterized in order to prevent damage to the system and preserve its integrity. Fortunately, this is not as hard as you may think. Essentially, the only thing you have to do is remove any excess water or restrictions in ...


    By Advanced Misting Systems

  • Controlling Dust and Bioaerosols at a Biosolids Composting Faclity

    Studies at enclosed Longmont, Colorado project evaluate exposure level of employees. Operational changes reduce dust, endotoxin and A. Fumigatus by 90 percent. WHEN dealing with public health issues and composting, attention has been predominantly focused on potential exposure from the release of Aspergillus fumigatus (A. fumigatus) from composting facilities. Numerous studies were conducted to ...


  • Mercury Spill Control Procedures

    Mercury is a dangerous neurotoxin that can have damaging affects on both the central nervous system and renal system of humans. Exposure to mercury can cause serious developmental delays in children, and high level exposure is life threatening. When exposed to air, mercury vaporizes, readily becoming a dangerous aerosol that can be absorbed into the lungs and spread throughout the body. This is ...


  • Mercury Spill Control Procedures

    Mercury is a known neurotoxin that is extremely toxic even in small amounts. It directly affects the central nervous and renal systems, causing developmental delays, motor and brain problems like those associated with autism. Mercury"s hidden danger also lies in when at room temperature, when exposed it vaporizes readily. Once ...


  • Erickson Cosmetics: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    Production was accelerating at Erickson Cosmetics, a Chicago-based maker of talc and cornstarch-based products for the Mennen Division of Colgate-Palmolive and other companies. The 320,000 sq. ft. plant is highly automated and, while the primary powder line operated within regulatory guidelines for dust control, Todd Nelmark believed there were strong reasons to consider automatic dust ...


    By Tri-Mer Corporation

  • Mercury spill control procedures - industrial hygiene news

    Mercury is a known neurotoxin that is extremely toxic even in small amounts. It directly affects the central nervous and renal systems, causing developmental delays, motor and brain problems like those associated with autism. Mercury’s hidden danger also lies in when at room temperature, when exposed it vaporizes readily. Once it has become an aerosol, it is absorbed into the lungs and ...


  • Air pollution control for the fertilizer industry in the Middle East - Case Study

    Through our subsidiary company, APC Process Engineering, ERG has an impressive track record in the Middle East Fertilizer Production Industry. All our systems come with a performance guarantee backed by more than 30 years of experience successfully treating industrial air pollution around the world. ERG’s systems are used for treating silica, phosphate rock and scale dust, ammonia, hydrogen ...

  • AngloGold Ashanti chooses Beltran WESP - Case Study

    AngloGold Ashanti Brasil Mineracao is a leading producer of gold in the world. AngloGold was working on production plans for the Cuiaba Gold Mining Expansion Project located at Nova Lima, Minas Gerasis. The plant's production capacity is projected to be equivalent to 400 metric tons of sulfuric acid per day. The Promon Company worked on the design, procurement, construction and assembly services ...


    By Beltran Technologies, Inc.

  • Multiple arms improve work environment

    The challenge As a result of the annual review of G.C. Entreprise, Køge ApS' work environment, it was decided to obtain a new extraction system. The service workshop needed a high-quality extraction system to remove welding fumes, grinding dust and oil mist, preventing accumulation in the workshop. ...


    By Plymovent Group BV

  • 5 ways to keep asthma in check

    Asthma rates have been on the rise for some time - in 2009 nearly 1 in 12 Americans were diagnosed with the long-term inflammatory disease that restricts airways and makes it difficult to breathe. Other symptoms include coughing, wheezing and chest tightness, and these often get worse when the patient is also fighting a common cold or flu. Asthma affects people of all ages, but especially ...


    By Allerair Industries

  • Workplace Monitoring: Who, What, When, Why, How?

    In my previous articles in this series for SHP readers, I have focussed on the need for current attitudes to general health and safety processes to change and emphasised the importance of regular monitoring. The best way to combat those ‘hidden killers’ and protect our workforces is to increase awareness of the benefits of regular monitoring and detection.  Employees then need to ...


    By Casella

  • What is Intrinsic safety and ATEX?

    What is intrinsic safety? Intrinsic safety (IS) is a low energy signalling technique that ensures the safe operation of electrical equipment in hazardous areas by limiting the energy – both electrical and thermal – available for ignition. ...


    By Hansford Sensors

  • Process-generated contaminants

    Overview: There is not currently a formal and universally recognised definition of a process-generated substance. Process-generated contaminants can be generated as emissions from combustion processes, abrasion and/or other processes that physically or chemically degrade or otherwise modify the starting material(s), e.g. degradation/composting of organic materials. Such ...

  • ENEL power, italy – torrevaldaliga project – ZLD plant for FGD wastewater treatment

    The Facility The Torrevaldaliga Nord Power Plant is being converted (torn down and rebuilt) to three coalfired units each of 660 Mwe capacity. The plant is equipped with fabric filters for flue gas dust removal, DeNOx system (for flue gas denitrification), FGD systems for sulphur oxides removal. The FGD system is equipped with a common wet limestone milling, three limestonegypsum forced ...

  • Electrofilter protection by fast monitoring of CO in flue gas – Case Study

    Electrostatic precipitators Many industrial operations produce exhaust gases that contain dust, fly ash (unburned constituents), fumes (including fine elemental particles such as cadmium, sulfur and lead) and mist (such as coal tar), which cause an unwanted impact to human health and the environment. One widely used method of removing such contaminants from a gas stream is to use an ...

  • WESP technology provides durable solution for Brazil’s top zinc operation - Case Study

    Forward-thinking metallurgical plant operators around the world constantly seek out more advanced exhaust gas recovery technologies, not only to meet increasingly strict environmental regulations, but also to achieve superior operating performance and to control maintenance and other costs in a competitive marketplace. One fully-integrated polymetal producer headquartered in Brazil has managed to ...


    By Beltran Technologies, Inc.

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • Phosphate Fertilizer Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you