dust control solution manufacturer Articles

  • Envirotac - Dust Control Solutions for Gravel and Dirt Roads

    EP&A Envirotac is the global leader in providing dust control and soil stabilization products across the world. Envirotac line of polymers is manufactured with the Environment in mind. They are safe to treat soils with and will not harm humans or wildlife. So if you need dust control and don’t have means to apply a dust control agent let us help you out, no matter where you are. We have ...


    By EP&A Envirotac

  • The invisible fine dust

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous. According to a current study conducted by the Max Planck Society, ...

  • LEV: What You Need to Know Before Selecting and Installing Dust Control Systems - White Paper

    Many processes in the production of drugs in the pharmaceutical industry produce significant quantities of dust which can cause serious health related problems to workers handling the materials. Additional problems of these operations are the loss of valuable material and the serious risk of cross contamination of drugs. Operations such as scooping, tablet processing, blending, milling, and tray ...


    By Kleissler P C, LLC

  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Innovative safety control

    Specialists of the LAMSYSTEMS Company implemented innovative approach providing protection efficiency of the microbiological safety cabinet class II NEOTERIC. Microbiological safety cabinets are used for operator, product, and environment protection when ...


    By Lamsystems

  • Mercury Spill Control Procedures

    Mercury is a dangerous neurotoxin that can have damaging affects on both the central nervous system and renal system of humans. Exposure to mercury can cause serious developmental delays in children, and high level exposure is life threatening. When exposed to air, mercury vaporizes, readily becoming a dangerous aerosol that can be absorbed into the lungs and spread throughout the body. This is ...


  • Boeing - deburring tables solution case study

    Problem Bombardier is a worldwide manufacturer of commercial and private aircraft. The Learjet repair and rework facility in Tuscon Arizona approached Diversi-tech for a dust control solution in their composite sanding area. The client wanted to protect the workers by having the dust removed before it could be inhaled or cross contaminate other parts. Diversitech visited the facility, ...


    By DiversiTech Inc

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Monroe scrubber solves pollution and odor problems from a glass resin reactor at a synthetic fiber manufacturing plant

    Monroe scrubber solves pollution and odor problems from a glass resin reactor at a synthetic fiber manufacturing plant Challenge The plant was emitting about 6.0 lbs/hr of toxic fumes from their resin reactor at a temperature of 200oF. The emitted gases to be cleaned were from hazardous, gaseous pollutants such as phenol and formaldehyde, as well as dust particulate. The ...

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By DiversiTech Inc

  • Odour Control at Pesticide Facilities: Eliminating volatile compounds

    Chemical formulation plants are susceptible to emissions of unpleasant and malodorous volatile compounds, a fact which makes the implementation of efficient odour control measures essential. North-western Spain is home to one of the country's oldest industrial sites for the manufacture of phytosanitary products, with some facilities located relatively close to populated areas. Recently, the ...


    By Bioconservacion SA

  • Valve actuation and control in the modern refinery - Case Study

    Introduction The Reliance refinery at Jamnagar in India is one of the largest single refinery sites in the world and virtually all of its valves are motorised with Rotork actuators. Almost 3000 Rotork IQ intelligent valve actuators were installed during the construction of the original refinery, tank farm and power station in the late 1990s, together with a Rotork Pakscan 2E two-wire ...


    By Rotork

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Boggabri Erosion Control Flumes, New South Wales - Case Study

    Background During the past ten to fifteen years, the resources sector has seen phenomenal growth however in the areas of coal, gas and petroleum the expansion has been unprecedented. In NSW, coal mining in the Hunter Valley near Singleton and Muswellbrook has always been the focus of attention for coal mining and growth, however despite expectations that deposits will be available for some ...


    By Presto Geosystems

  • Erosion and Sediment Control: Navigating NPDES Regulations, the SWPPP, and Techniques for Compliance

    Erosion and Sedimentation: Why Are They a Problem? The US Environmental Protection Agency lists sediment as the single most common pollutant in rivers, streams, lakes, and reservoirs. With all the potentially harmful chemicals and substances in the world, it seems odd to many people that sediment—dirt, essentially—is singled out as the major culprit. Yet these particles of ...


    By FINN Corporation

  • Rotork electric valve control contributes to Coca-Cola Enterprises’ environmental improvements - Case Study

    Sector: Food & Beverage Category: Process Control Actuators Products: CVL, CVQ Overview Rotork electric valve control contributes to Coca-Cola Enterprises’ environmental improvements    Rotork CVA electric control valve actuation technology is helping Coca-Cola Enterprises (CCE) ...


    By Rotork

  • Syncreon International Group - case study

    Syncreon is a specialised provider of integrated logistics services to global industries who provide supply chain solutions designed and customized to achieve maximum flexibility and agility. When Syncreon entered into agreement with a major manufacturer of printer cartridges to establish and operate a new manufacturing plant in Poland for the filling of printer cartridges they knew precisely who ...


    By Western Air Ducts (UK) Ltd.

  • Wood briquettes packed full of energy

    Konolt manages its energy output using RUF briquetting machinery Timber processors Konold are improving their energy balance with the help of their RUF briquetting machine. Wood waste is being pressed into briquettes to create a uniform combustible material. The heat they produce is then used for process heating and to heat their premises, with the residual heat being used to generate ...

  • High Tech Research Centre - Case Study

    The UK’s new High Temperature Research Centre (HTRC) has been designed to provide the UK with world-leading R&D capabilities in investment casting – and to tackle the dust extraction and fume extraction challenges these processes involve, both today and in the future, Western Air Ducts has designed and installed a complete, intelligent LEV system. The showcase £60m ...


    By Western Air Ducts (UK) Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you