dust filter component Articles

  • Down with road dust

    There are more than 3.9 million miles of roadway in the United States, according to the Federal Highway Administration, and, depending on the area of the country you're in, as much as 70% of that road mileage is unpaved. The 1997 U.S. Environmental Protection Agency (EPA) National Air Quality and Emissions Trends Report states that those unpaved roads--which can cover a wide range of ...


    By Cypher Environmental Ltd.

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

  • High performance microbiological filter

    Filtration processes are a large cost component of pharmaceutical manufacture. The particle retention efficiency, particle capacity of the filter and the liquid flux all impact on product cost. A non woven electropositive filler media has been developed whose active component is an alumina (AlOOH) fiber two nanometers in diameter and having a surface area of 350-500 m7g. The nano fibers are ...


    By Argonide Corporation

  • American Upstart Filter Brand Competing with the Majors

    Flexotherm® has expanded its product line in the highly competitive filtration market.  The company now offers 2,900 different filter elements including coalescers, particulate, adsorbers, general purpose and high temperature filters. ...


    By Neptech Inc.

  • How do oil mist collectors work? Comparing the different technologies, part II

    In our previous article about oil mist collector technology, we discussed the pros and cons of centrifugal mist collectors and filter-based mist collectors. Today, we look at the other two most common methods of getting oil mist out of the air. Electrostatic Precipitator Mist Collectors An electrostatic precipitator uses ...


    By ProVent, LLC

  • Tips to Select Steam Cleaners for Blinds Cleaning

    Two groups of people buy steam cleaners for blinds cleaning. The first group comprises people who have used floor steamers earlier for cleaning blinds. They know the type of machine they need and what to expect from it. The second category belongs to people who have used some other types of machines and did not like the cleaning efficiency of the machines. These people would have learnt from ...


    By Daimer Industries Inc.

  • Waste Transfer Station Odours - Case Study

    Application Greenstar Ltd. who operate the large waste transfer station at Ballyogan needed to ensure working conditions inside the building were acceptable to the workforce and that the surrounding area did not suffer from odourous emissions. An early part of the design process called for an efficient extraction system to draw air from the Reception Hall and the Baling Hall to meet these ...

  • Executing Regular, Preventive Maintenance of your Gas Furnace

    Your gas heating system was designed to go on for several years, and you can significantly extend that time by executing regular, preventive maintenance. The following suggestions will allow you to maintain your furnace working efficiently for as long as possible, and limit costly fixes in the future. Run it safely Prior to beginning any repair work, be sure that circumstances ...


    By Primo Heat Inc

  • Ultrafiltration and Reverse Osmosis for Landfill Leachate Treatment

    Lanchester Landfill serves Eastern Lancaster County and Western Chester County in PA for disposal of household and construction waste. The facility produces around 10,000 gals per day of leachate. The Problem The facility ran a single basin sequential batch reactor (SBR) and a filter press to dewater the solids for many years, but found that they first, could not sustain a ...


    By Dynatec Systems Inc.

  • How to Germ-Proof your office

    Have you had time off work this winter for a cold or flu? Or do you and your colleagues always feel you have to 'struggle in' or go back before you were really well, because of pressure from work? If it's the latter, then it's likely that your office is a hotbed of germs (microbes) at the moment - and that poses an immanent threat to people suffering with allergies and asthma. So I've rounded up ...


    By Commercial Air Filtration

  • Global Polyphenylene Sulfide (PPS) demand is expected to reach 170 kilo tons by 2020 growing at a CAGR of over 10% from 2013 to 2020

    The global market volume for Polyphenylene Sulfide (PPS) is expected to be over 170 kilo tons by 2020, according to a new study by Grand View Research, Inc. Growth in global automotive industry; particularly in China is expected to drive the demand for PPS. In addition, the favorable regulatory scenario in China with regards to the automotive industry is expected to further augment the demand for ...


  • Tile Cleaning Equipment with Vacuum Extraction Feature

    Ask most contractors what they require with their tile cleaning equipment and they would reply - productivity. Without a machine that offers high output, your business could fail. Tiles can be very hard to clean. Soap scum, water stains, molds, food stains, and other impurities accumulate on tiles quickly. In commercial kitchens and public restrooms especially, dirt accumulates on tile very fast. ...


    By Daimer Industries Inc.

  • Analysis of PCBs in emission samples: non ortho, mono-ortho and homolog totals by level of chlorination

    IntroductionPolychlorinated biphenyls (PCBs) are one of the most widespread persistent organic pollutants, identified in every component of the global ecosystem. A production of approximately 2 * 10 9 Kg technical PCB occurred form 1930 to the late 1970 1 and the total amount released into the environment is estimated in 370. 000 2 tonnes. Twelve of the possible 209 PCBs are non- and mono-ortho ...


    By Monitoring Systems GmbH

  • Why instrument hire makes occupational safety sense

    Background Decisions concerning the acquisition of occupational safety monitoring instrumentation are often made by operational staff that may not have visibility of the full financial implications of their choices. The following article will examine the factors affecting these decisions and explain why a strategic decision to hire instrumentation can deliver substantial and wide-ranging ...


    By Ashtead Technology Ltd

  • Office Printers Emit Ultra fine particle pollution

    We’ve heard quite a bit about particulate matter PM10s and PM2.5s as components of air pollution that we are exposed to on a daily basis. Recent research papers are highlighting the dangers of ultra fine particles (UFPs), which have a diameter of less than 0.1 micrometres (or 100 nanometres). By contrast, the diameters of particulate pollution from PM10s and ...


    By Commercial Air Filtration

  • Spending small to save big in a downturn

    How strategic upgrades in bulk handling components can pay off in the short term "You can"t save your way to solvency" goes the business adage, but suggesting major capital improvements with long-term pay-out in tight economic times may send your co-workers running for cover. Prosperity can often be found between both extremes, where strategically placed equipment upgrades can instantly reduce or ...


    By Flexicon Corporation

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Air Separation Plants and the Use of Oxygen Monitors

    Air separation plants are critical for many different industries, from clean energy to manufacturing. Nowadays, cryogenic is the most common type of distillation used to separate air into its component gases - nitrogen, oxygen, and inert gases including helium and argon. If your industry relies on air separation for product development or manufacturing, then knowing how the process works is ...

  • Top 7 Causes of Mold in Commercial Properties

    Mold growth within commercial buildings is a common concern for building occupants, as it has been linked to a number of health effects and can be found lurking within the walls and within ventilation systems, oftentimes going undetected for long periods of time. Here are the top seven causes of mold in commercial properties and what you need to know to prevent them. Improper Operation and ...


    By Karl & Associates Inc.

  • Choosing the Right Vibratory Sifter for Sieving Food Powders

    Food and beverage manufacturers have to adhere to extremely high standards of production quality, both to meet their regulatory obligations and to manage risk when bringing a product to market. Sieving and sifting food powders is a critical step in the manufacturing of several products, one that is responsible for filtering out fine impurities that can ...


    By VibraScreener Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you