dust filter part manufacturer Articles

  • Dust collection dilemma: ostrich egg dust

    Rick Peil from the Toolking Superstore was presented with an interesting dust collection dilemma. Tamera Seevers creates unique fine art out of ostrich eggs (www.tameraseeversstudio.com). Carving and finishing the ostrich eggs takes up to three months and creates a very fine, ostrich egg dust. Her problem was with her 1-micron bag on the dust collection system, the dust was still escaping into ...


    By American Fabric Filter Co

  • ‘New for old’ dust analyser deal brings 96.66% data capture rates to NE Lincs

    With the UK’s largest port and the industrial town of Grimsby in its jurisdiction, air quality monitoring is a primary concern for North East Lincolnshire Borough Council. When DEFRA reported that the TEOM dust analysers the council relied on weren’t up to standard, rapid action was required and Enviro Technology (ET) stepped in with its BAM 1020s. North East Lincolnshire is the ...

  • Air Powered Combustible Dust Vacuums More Economical and More Powerful than Electric Counterparts

    Compressed air vacs have significantly lower upfront cost and lower yearly maintenance costs that quickly surpass the expense of compressed air production. There is a prevailing perception in the industrial world, attributable to the higher costs associated with producing compressed air, that air powered explosion proof vacuums cost more to operate. According to David Kennedy, General Manager of ...


    By AirSys Technologies, Inc.

  • Minimising Risks to Air Quality and Regulatory Compliance With Total Filter Management

    It has been shown in recent studies that as much as 25% of the total site operating budget (excluding raw material costs) for a typical medium-large dosage-form manufacturing facility will be spent on compliance measures for internal quality systems and external regulatory activities. (1) Market realities indicate that the pharmaceutical companies will need to address the overall cost of ...


    By GVS Filter Technology

  • Choosing a Cyclone Collector

    CYCLONE COLLECTORS Many of us have seen the large funnel shaped mass of metal sitting outside of a manufacturing facility, school or processing plant. These are cyclone dust collectors and they come in many shapes and sizes. If you are curious how they work or are wondering which one will be the right one for your process, read on. HOW THEY WORK Cyclone dust ...


    By ProVent, LLC

  • New Nozzle Technology “Cleaning More with Less”

    This technical paper will explain the new nozzle technology developed by Scientific Dust Collectors that allows high air-to-cloth ratio baghouses to use 80psig of compressed air instead of the industry standard 100psig.   The reverse pulse jet baghouse has been around for over 50 years and the cleaning cycle has not changed very much during that time. The cleaning cycle is the most important ...


    By Scientific Dust Collectors

  • The best alternative to the protection of the UF membranes - Case Study

    Advance solutions to the recirculation of water in swimming pools. Problem The public swimming pools are continuously used during all the week for many people for making sport, amusement or relax. In these installations, the visual aspect and the sanitary conditions must be guaranteed all the time. In indoor public pools, even with the mandatory previous shower and the use of ...


    By Sistema Azud, S.A.

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • Global Polyphenylene Sulfide (PPS) demand is expected to reach 170 kilo tons by 2020 growing at a CAGR of over 10% from 2013 to 2020

    The global market volume for Polyphenylene Sulfide (PPS) is expected to be over 170 kilo tons by 2020, according to a new study by Grand View Research, Inc. Growth in global automotive industry; particularly in China is expected to drive the demand for PPS. In addition, the favorable regulatory scenario in China with regards to the automotive industry is expected to further augment the demand for ...


  • ACS installation at Glowood 100,000ton/y pellet plant achieves 12mg/Nm3 - Case Study

    With increasingly tougher restrictions on industrial air emissions, pellet manufacturers are looking to "future-proof" particulate matter (PM) compliance, cost effectively. One Portuguese producer, Glowood Indústria S.A., has recently installed a brand new type of mechanical cyclone. The most recent results show a remarkable reduction of its PM emissions, from 700mg/Nm3 to under ...

  • Increased demand for XRF analyser hire

    Steve Drake, NDT Market Manager at Ashtead Technology believes that XRF is one of the most important technologies in the company’s fleet of NDT and environmental testing instruments. “With a small amount of training, almost anyone can implement detailed inspections in a wide variety of applications, and with most instruments being lightweight and robust, XRF analysers are among the ...


    By Ashtead Technology Ltd

  • Air Separation Plants and the Use of Oxygen Monitors

    Air separation plants are critical for many different industries, from clean energy to manufacturing. Nowadays, cryogenic is the most common type of distillation used to separate air into its component gases - nitrogen, oxygen, and inert gases including helium and argon. If your industry relies on air separation for product development or manufacturing, then knowing how the process works is ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Hired metals analyser ensures remediation success

    Cognition Land and Water Ltd, a UK based remediation specialist, has hired a portable XRF metals analyser to improve the speed of remediation work at a project in London’s Kentish Town. The project had a major impact on local residents so timescales were extremely tight but Cognition’s Charlie Jarvis says “It would not have been possible to meet the deadline without the use of ...


    By Ashtead Technology Ltd

  • Metals & Finishing Industrial Wastewater Treatment

    Industrial Wastewater Treatment Success Stories Metals and Finishing Industrial Wastewater Treatment Aircraft Components - 80% Cost Reduction ...


    By Integrated Engineers Inc.

  • Thematic Issue: Nanomaterials’ Functionality

    Nanomaterials: addressing the challenges, benefiting from the opportunities Some of the deepest challenges we will face in the coming decades derive from the opportunities offered by emerging technological advances. Many of these will improve our quality of life, and develop our economies, but all will be measured against the overarching principle that we do not make some error, and harm ...

  • Glass blended rapidly with abrasion resistant rotary mixer

    While most reading this article may be unfamiliar with the Kopp Glass name, most are likely familiar with Kopp Glass products. From a humble beginning more than 80 years ago, as a manufacturer of red glass for railroad signals, Kopp now claims to be the world's leading producer of precision molded industrial quality technical glass.  The company is known worldwide among the ...

  • Noise Measurement

    Definitions Threshold and criterion levels The threshold level is the A-weighted sound level at which a personal noise dosimeter begins to integrate noise into a measured exposure. For example, if the threshold level on a sound level meter is set at 80 decibels (dB), it will capture and integrate into the computation of dose all noise in the employee's hearing zone that equals or exceeds 80 dB. ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you