dust monitor manufacturer Articles

  • Hurricane: Pharmaceutical spray dryer - case study

    FOREWORD In 2008 one leading company in API development and manufacturing, approached ACS for improving the yield of powder captured in the cyclone after its 1450 kg/h N2 pharmaceutical spray dryer. This company is an international group dedicated to the cGMP development and manufacture of APIs, serving exclusively the pharmaceutical industry. With a 50-year track record, it ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • What is Intrinsic safety and ATEX?

    What is intrinsic safety? Intrinsic safety (IS) is a low energy signalling technique that ensures the safe operation of electrical equipment in hazardous areas by limiting the energy – both electrical and thermal – available for ignition. ...


    By Hansford Sensors

  • How well does my filter work?

    Contamination control is the key to a cost-effective maintenance operation for hydraulic or engine systems. You depend on your filters, whether hydraulic, lube or fuel, to keep your fluids clean, to keep maintenance costs down, and to ensure reliable operation. At some point, you probably will ask yourself whether or not your filters are really working and doing what they were designed to do. ...

  • High Tech Research Centre - Case Study

    The UK’s new High Temperature Research Centre (HTRC) has been designed to provide the UK with world-leading R&D capabilities in investment casting – and to tackle the dust extraction and fume extraction challenges these processes involve, both today and in the future, Western Air Ducts has designed and installed a complete, intelligent LEV system. The showcase £60m ...


    By Western Air Ducts (UK) Ltd.

  • Why instrument hire makes occupational safety sense

    Background Decisions concerning the acquisition of occupational safety monitoring instrumentation are often made by operational staff that may not have visibility of the full financial implications of their choices. The following article will examine the factors affecting these decisions and explain why a strategic decision to hire instrumentation can deliver substantial and wide-ranging ...


    By Ashtead Technology Ltd

  • Advanced gas analysis - on the go

    The field of ambient air analysis - monitoring industrial and other environments for harmful concentrations of gases - has traditionally faced a technology limitations: Would you prefer a complete and reliable tool, which will be bulky, complicated and inconvenient? Or would you like a nice portable one that's simple and lightweight, but unreliable and limited in its capability? Truly complete ...


    By HHCS Handheld USA Inc.

  • Understanding the potential class II – Division I Safety Hazards present when operating Vertical Cuttings Dryers

    For decades, the industry standard for waste management dryers (a.k.a. vertical cuttings dryers) has relied on belt-driven sheaves. Though belt-driven systems are cost effective and relatively easy to implement, at a minimum they have represented a maintenance nuisance, at worst they represent a serious safety concern when ...


    By Elgin Separation Solutions

  • Lynn L. Bergeson Quoted in Bloomberg BNA Daily Environment Report Article “Citizens Petitions, Lawsuits on Chemical Rules Likely to Grow”

    On January 18, 2018, Lynn L. Bergeson, Managing Partner, Bergeson & Campbell, P.C. (B&C®), was quoted in a Bloomberg BNA Daily Environment Report article regarding an increase in citizen group petitions as a result of Toxic Substances Control Act (TSCA) Reform. Chemical manufacturers should expect to see more petitions from citizen groups asking the EPA to regulate substances now ...


    By Bergeson & Campbell, P.C.

  • Abrasives case study - Western Paving Corporation

    Smart Elbow® ends elbow wear problem in paving plant Subject Western Paving Corporation's Denver, Colorado plant Situation A division of Western Mobil, Western Paving Corporation makes asphalt for their own extensive paving operation as well as supplying others'. The plant produces 29 different paving product mixes, ...


    By HammerTek Corporation

  • Modular treatment system neutralizes process water

    A self-contained pH control and monitoring sys- tem for ready mixed operations yields clean water for recycling or permitted discharge to the environment. Fortrans' Model 5000S uses car- bon dioxide gas to neutralize high-pH process water, offering precise alkalinity monitoring and control of water in pits, settling basins and other containment areas, as it lowers total suspended solids. Designed ...


    By Fortrans, Inc.

  • Bioaugmentation is a cost-effective and sustainable remediation alternative

    Selecting a remediation alternative that is compatible with the natural soil and ground water conditions is not only a more sustainable approach, but leads to significant savings. Comparison between bioaugmentation and other remediation methods in the five recognized sustainability criteria demonstrates the advantages of bioaugmentation. While this paper is nota complete quantitative analysis, it ...


    By CL Solutions, LLC

  • Minimising Risks to Air Quality and Regulatory Compliance With Total Filter Management

    It has been shown in recent studies that as much as 25% of the total site operating budget (excluding raw material costs) for a typical medium-large dosage-form manufacturing facility will be spent on compliance measures for internal quality systems and external regulatory activities. (1) Market realities indicate that the pharmaceutical companies will need to address the overall cost of ...


    By GVS Filter Technology

  • Phosphate Fertilizer Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • Exceeding expectations: Safer and better – for all!

    In order to reduce emissions to a minimum and increase the employee’s safety at the facilities, Elkem cooperate with NEO Monitors.At Elkem’s plant in Salten, Norway, silicon is produced from quartz in a high temperature ...


    By NEO Monitors AS

  • American Upstart Filter Brand Competing with the Majors

    Flexotherm® has expanded its product line in the highly competitive filtration market.  The company now offers 2,900 different filter elements including coalescers, particulate, adsorbers, general purpose and high temperature filters. ...


    By Neptech Inc.

  • PureAire Oxygen Analyzer for 3D Printers: How Argon is used and Why O2 Detection is Required

    Thanks to new technologies, the 3D printers that have been used to create plastic three-dimensional objects can now print metal. Titanium 3D printing is possible thanks to a technique called DMLS, or Direct Metal Laser Sintering. While the potential to use titanium 3D printing is groundbreaking for many industries, the new advances could pose a health hazard if volatile gases used in the printing ...

  • Econo-Pak`s Compact Case Packer Uses the Latest Adhesive Technology

    One of many OEMs to opt for the innovative ProBlue Liberty hot melt application system from Nordson recently is Econo-Pak GmbH. With headquarters at Flonheim in the German state of Rheinland-Palatinate, the specialist for various types of end-of-line packaging machines recently exhibited a version of its new generation of case packers in combination with an especially powerful model of the ...


    By Nordson EFD

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you