dust monitoring fall-out Articles

  • Dust monitoring

    Generally, two different approaches are used to measure the amount of dust deposited on a surface; Determination of the soiling of a surface, by a change in its properties; Determination of the quantity of dust deposited, by weight. WHAT IS DUST? Dust is a generic term used to describe fine particles that are suspended in the atmosphere. Dust comes from a wide variety of sources, including soil, ...


    By Queensland Laboratory

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

  • The invisible fine dust

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous. According to a current study conducted by the Max Planck Society, ...

  • Reflectance spectroscopy as a tool for settled dust monitoring in office environment

    The aim of this study was to develop a technique based on reflectance spectroscopy that is capable of evaluating small amounts of sediment dust. Laboratory simulations and two field experiments conducted in the same office environment were carried out to generate particulate dust samples based on multivariate data analyses. Spectral measurements were taken using either a laboratory Quantum 1200 ...


    By Inderscience Publishers

  • Retrofit Intelligent Dust Extraction System

    Western Air Ducts Retrofits Intelligent LEV Solution at City of Oxford College The proffesionally equiped woodworking workshop at the Rycotewood Furniture Centre, at the City of Oxford College city centre campus, is a key resource for the many students of furniture design and ...


    By Inteliair Ltd

  • Exposure to dust, endotoxin and airborne microorganisms in wastewater sludge thermal drying units

    The objective of this study was to assess workers' exposure to bioaerosols in sludge drying units. Simultaneous collection of inhalable dust and airborne biological agents was carried out using rotating cup samplers (CIP 10, Arelco). Sixteen stationary and 30 personal measurements were performed in three drying plants, during summer and winter. Microbial content of air was characterized by high ...


    By IWA Publishing

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Casella BOUNDARY Guardian helps to control noise and dust on major London construction project

    Casella‘s BOUNDARY Guardian is helping to ensure noise compliance and control of air quality at BSkyB’s campus redevelopment site, bringing peace of mind to site operators, the client and the local community. The BOUNDARY Guardian is a system for web-based remote monitoring of noise and/or dust emissions that ensures compliance ...


    By Casella

  • Air Pressure Monitoring for a Chemical Fume Hood

    CAS DataLoggers recently provided the pressure and temperature datalogging solution to a manufacturer using a chemical fume hood to protect workers by containing vapors, dusts, gases, and fumes, and then expelling them as air flowed into the hood from the front (open) side of the cabinet and then out via the ducted hood exhaust system. Designed for 2 operators, the fume hood had a Fiberglas ...


    By CAS DATALOGGERS

  • Workplace Monitoring: Who, What, When, Why, How?

    In my previous articles in this series for SHP readers, I have focussed on the need for current attitudes to general health and safety processes to change and emphasised the importance of regular monitoring. The best way to combat those ‘hidden killers’ and protect our workforces is to increase awareness of the benefits of regular monitoring and detection.  Employees then need to ...


    By Casella

  • Air Separation Plants and the Use of Oxygen Monitors

    Air separation plants are critical for many different industries, from clean energy to manufacturing. Nowadays, cryogenic is the most common type of distillation used to separate air into its component gases - nitrogen, oxygen, and inert gases including helium and argon. If your industry relies on air separation for product development or manufacturing, then knowing how the process works is ...

  • Together we can get the lead out

    If there is one lesson to be learned from the Flint crisis, it is this: Our communities will be safer in the long run with no lead pipes in the ground. That’s why the board of the American Water Works Association – recognizing our first core principle is the protection of public health -- voted unanimously on March 7 to forge on a path toward the removal of all lead service lines. ...

  • Stacking up: flare Monitoring from LumaSense

    Lenny Shaver, LumaSense Technologies’ director of product management, explains the company’s IR and pyrometer technologies FLARING systems are common in many industries to burn gases before they enter the atmosphere. The safe operation of a flaring system requires the continuous monitoring of pilot flames and flared gases to ensure that vented gases are ignited. As ...

  • The Use of Particulate Emission Monitors to Support Arrestment Plant Operation and Upkeep

    The operation of filtration type arrestment plant can be optimised by the effective use of Particulate Emission Monitors (eg Filter Leak Monitors and Filter Performance Monitors). Particulate Emission Monitors are installed throughout the broad spectrum of industrial processes to satisfy regulations (IPPC, Part B Guidance Notes, WID and LCPD) for emission limit enforcement. In addition, where ...


    By PCME Ltd

  • Radiological safety and environmental monitoring aspects of mining and processing of uranium ore at Jaduguda, India

    Low–grade uranium ore is mined and processed in India since the early 1970s. To adhere to the regulatory compliance monitoring of external gamma level, radon and long–lived alpha activity of ore dust is carried out in uranium mines. Apart from this, surface contamination is also monitored in radiologically important areas of ore processing plant. Exposure of occupational workers is evaluated ...


    By Inderscience Publishers

  • ET`s Acquisition of Casella Monitor’s UK Service & Maintenance Business - The Real Story

    On 30th March 2012 ET and Casella Monitor completed an agreement whereby ET acquired the UK service and maintenance business for air quality monitoring from Casella. The agreement included the transfer of all 6 field based Casella Monitor’s Service Engineers to ET, all of Casella Monitor’s service contracts for air quality monitoring support and the entire stock of ...

  • Some air pollution indicators in city of Tirana, Albania

    The problematic of the stable development is very wide. Recognition of ecological aspects of stable development composes a guarantee of health in ecosystems and especially for the community. The monitoring of the air that is carried out in Tirana shows that the most important polluters continue to be the total dust LGS and respiratory dust PM 10. The average quantity of lead in the monitored air ...


    By Inderscience Publishers

  • British American Tobacco Survey – Case Study

    Project Highlights Envirochem carried out environmental perimeter monitoring during the demolition of warehouses at the British American Tobacco site in Southampton. Airborne Dust, noise and vibration levels were all monitored using state of the art equipment. Project ...

  • Former Ordnance Survey (2) – Case Study

    Project Highlights Envirochem carried out environmental perimeter monitoring during the demolition of the former Ordnance survey site in Southampton. Airborne Dust, noise and vibration levels were all monitored using state of the art equipment. Project Description ...

  • Former Ordnance Survey – Case Study

    Project Highlights Envirochem carried out environmental perimeter monitoring during the demolition of the former Ordnance survey site in Southampton. Airborne Dust, noise and vibration levels were all monitored using state of the art equipment. Project Description ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you