dust press Articles

  • Domestic Development of Dry Powder Ball Pressing Machine

    Dry powder ball pressing machine is a kind of mix powder material powder or granular material is compressed into the ball equipment, widely used in metallurgy, coking, mining, coal, electric power and other industries, can be of aluminum and alumina powder, ferric oxide powder, coke crumbs, limestone powder, crystal and other granular materials are pressed into the ball. After pressed pellets can ...

  • WEIMA America introduces the TH seris briquette press to the paper market

    WEIMA America is a leader in size reduction technologies which includes both shredding and briquetting equipment. The briquette press has become increasingly popular to compact shredded paper as well as paper dust. In a printing operation a lot of dust is generated from trim scrap and sheeters which is often messy and hard to handle. The press has the ability to compact this dust into briquettes ...


  • Case study - Mining equipment cleaned with Ivey-sol prior to painting. used to remove residual oils and coal dust. successful application

    It was excellent, it worked very well It took all the oils and coal residues off in a fraction of the time it normally takes when using just high pressure hot water. It allowed us to clean and prep the equipment for painting in 1 verses 2 days". Post Treatment Water Following Ivey-sol Treatment of Heavy Waste-oil Contaminated Soils at a Refinery Site. The precipitation of the oil was effected ...


    By Ivey International Inc.

  • Tissue manufacturer uses WEIMA machinery to utilize waste and increase profits case study

    Nestled in the rolling hills of North Carolina (USA) is a tissue manufacturing plant that will take your breath away at first glance. This state-of-the-art facility is over one million square feet and operates around the clock producing large quantities of tissue and paper towels. This particular plant prides itself in being safe, profitable, and environmentally friendly. In order to reach these ...


    By WEIMA

  • Tissue Manufacturer Uses WEIMA Machinery to utilize waste and increase profits case study

    Nestled in the rolling hills of North Carolina (USA) is a tissue manufacturing plant that will take your breath away at first glance. This state-of-the-art facility is over one million square feet and operates around the clock producing large quantities of tissue and paper towels. This particular plant prides itself in being safe, profitable, and environmentally friendly. In order to reach these ...


    By WEIMA

  • The Variety Kinds of Fote Briquette Machine

    To make our life more convenient and efficient, Fote Machinery produces many machines to meet the satisfactory of people. For example, Fote briquette machine which is widely used in coal, chemical. And there are many kinds of briquette machine, such as coal ball press machine, coal briquette press machine, dry ...


    By Fote Machinery

  • Large volumes compressed into small volumes saves costs case study

    Vöhringer GmbH with its 120 staff and ultramodern machine park in Trochtelfingen each day processes up to 40,000 m2 of sheeting. This is mainly used for manufacturing specialist furniture parts up to complete furniture sets – especially for caravans and mobile homes but also for exhibition stand construction, for doors and the furniture industry. Chippings and dust accumulating during ...


    By WEIMA

  • Tanzanian grass (hay) report on shredding and briquetting tests case study

    Date: 02.04.2011 Place: ASKET, Biomass Division in Gniewkowie Tested material: grass from Tanzania, rice husks, grass moisture content 12% 14% Technology: briquetting set BIOMASSER® SOLO-SET: shredder RK 7,5 kW, screen 15 mm, standard blades briquetting press BIOMASSER® SOLO type BS06 ...


    By ASKET

  • Maize (corn) straw report on shredding and briquetting tests case study

    Date: 28.04.2012 Place: ASKET, Biomass Division in Gniewkowo Tested material: maize straw, loose, moisture content 13% Technology: briquetting set BIOMASSER® DUO-SET: shredder TOMASSER® RK 7,5 kW, screen 15 mm, blades RB briquetting press BIOMASSER® DUO type BS210. ...


    By ASKET

  • WEISS provides for the heat - and disposes of the waste case study

    The very first time PLIMOB learnt about Weiss was in 1995 at which time contacts at IKEA told about combustion plants from WEISS. IKEA is the most important customer for PLIMOB so the management listened to the recommendations. PLIMOB is producing wood furniture; large quantities of wood chips and sawdust are a spin-off effect from their production. Traditionally wood-working industries – ...


    By WEISS A/S

  • Making commercial product from waste

    County Tyrone-based CDE Ireland Ltd, specialists in the design and manufacture of tailor-made processing equipment for the sand and aggregates industries, have recently installed a complete new processing system for Liam Lynch (Quarries) Ltd’s limestone quarry in Croom, Co. Limerick.The system includes Ireland’s first overhead-beam GHT filter press, which recycles the maximum amount ...


    By CDEnviro

  • Making environmentally friendly fuel from wood chips - Case Study

    The RUF briquetting press earns the Ortinger company additional profits During the production of round bars or rods for flags, skewers and many more products made from wooden planks, lots of wood chips are accumulated. Instead of disposing of them as waste, the wood processor Ortinger presses them into briquettes, which they then sell as fuel. This way they can economically support ...

  • Introduction to Smco Magnets

    Samarium (Sm) magnets are rare earth magnets manufactured into two series. The first series is sometimes referred to as SmCo5 (Co means cobalt), which is usually a high energy product of about 18 to 22 MGOe. The second is the most commonly known as Sm2Co17, which is a higher energy product of about 22 to 30 MGOe. It combines 2 Sm atoms and Co atoms between 13 and 17. It is basically an alloy of ...


    By Stanford Magnets

  • Briquettes Are the New Renewable Energy

    You can walk towards a sustainable and clean environment by promoting usage of Briquettes which can be made by various kinds of Briquetting machines. There are different types of machines, and a large number of manufacturers supply them with versatile range and performance. It is a very effective initiative to keep the glory of the environment by making it pollution free and encourage the use of ...


    By Jay Khodiyar Machine Tools

  • Springfield MA case study

    At Their Disposal Komline-Sanderson minimizes solid waste disposal costs in Springfield, Mass The City of Springfield, Mass., currently uses a contract composting facility, which is located at the 65 MGD Bondi Island Wastewater Treatment Plant to dispose of their solid waste. The composting facility requires a feed of 40–45% solid materials to ...


    By Komline-Sanderson

  • Floating community ecological sanitation project on the Tonle Sap Lake

    Water and sanitation are some of the most pressing issues facing people in rural Cambodia, and they are even more difficult to access for people that live in floating and flood-affected communities on Cambodia’s waterways. Human development in the country is still restrained by pollution and poor health, yet there is a lack of appropriate ...


    By IWA Publishing

  • Turning wood chips and sawdust into a valuable solid fuel

    RUF briquetting units are the economical solution for the processing of wood chips and sawdust. Where timber is planed, turned and sanded, manufacturers end up with large quantities of wood chips and sawdust. By briquetting this material, you can recover a valuable solid fuel. Where large quantities are produced, the single briquette pressing system developed by RUF GmbH is the most economical ...

  • 25 Years of Success – Outokumpu Stainless DC Plasma Smelting Facility

    Design is not just what is looks and feels like. Design is how it works. Between 1982 and 1987, British Steel (Outokumpu today) made extensive investigations into the treatment of steel dust. Their research was far and wide and covered off many various methods of recycling, including alternative to plasma technologies. But, in 1985, they engaged Tetronics International to carry out a ...

  • Rice straw report on shredding and briquetting tests case study

    Date: 29.06.2011 Place: ASKET, Poznañ Tested material: rice straw from Egypt Technology: briquetting set BIOMASSER® SOLO-SET: shredder RK 7,5kW, screen 15 mm, standard blades briquetting press BIOMASSER® SOLO type BS06. Shredding Rice straw ...


    By ASKET

  • Pay Attention to the Operation of New Wood Pellet Mill

    Pay Attention to the Operation of New Wood Pellet Mill In recent years, wood pellet mill has been used widely all over the world. Many factors affect the wood pellet quality, among which the most basic aspect is the operation of wood pellet mill, especially for the new purchased pellet mill. Grinding, ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you