dust removal filter Articles

  • Particle removal efficiency of Nano alumina fiber filters

    A 2 nanometer alumina fiber is combined with a microglass fiber to produce a nonwoven filter. Its pore size is 2 microns, yet it is functionally rated at 0.03 microns. Data are presented showing dirt holding capacity and filtration efficiency for particles from 0.001 to 7 microns. The filters have high retention for micron size silica dust, bacteria, virus, DNA/RNA, tannin and latex spheres. ...


    By Argonide Corporation

  • Selecting a Cyclone Dust Collector

    Cyclone dust collectors are easily confused with normal dust collectors. These are different and proficient to removing large amounts of harmful dust and rough material particles that are flowing in the air. Cyclone dust collectors can also pick up contaminants before hitting the filter. When it comes to the process of filtration, cyclone ...


    By ProVent, LLC

  • Down with road dust

    There are more than 3.9 million miles of roadway in the United States, according to the Federal Highway Administration, and, depending on the area of the country you're in, as much as 70% of that road mileage is unpaved. The 1997 U.S. Environmental Protection Agency (EPA) National Air Quality and Emissions Trends Report states that those unpaved roads--which can cover a wide range of ...


    By Cypher Environmental Ltd.

  • Uni-wash wet dust collectors reduce industrial dust hazards

    Metal dust — it can be a fabricator’s worst nightmare. In particular, the combination of dry aluminum dust and steel dust is literally a disaster waiting to happen. The National Fire Protection Association has a list of metal dusts and the specific PPM that the air can hold of each before the serious risk of an explosion arises. As a worksite approaches the PPM safety limits of one or ...


    By ProVent, LLC

  • Wet Dust Collectors: Options and Operations

    A wet dust collector comes in the choice of three variations and these are: gas/liquid contact, gas/liquid separation and gas humidification. The difference between the three is based on how the dust is collected and separated inside the system. A wet dust collector, also known as a wet scrubber, ...


    By ProVent, LLC

  • The Function and Purpose of Portable Dust Collectors

    Portable dust collectors are movable devices that are useful to decrease and collect contaminant substances from the air in your work environment, producing units and plants. Portable dust collectors are small devices and portable, which means they can easily be transferred from place to place. Structure The ...


    By ProVent, LLC

  • The Different Kinds of Dust Collection Booths

    Factories that produce heavy dust particles require a dust collector system in place, so employees can breathe in clean and pure air at all times. Also, with one of these systems in place, machinery functions well and lasts longer. Dust collection booths also help limit dust into a closed area and safely trap it inside a closed space for ...


    By ProVent, LLC

  • Retrofit Intelligent Dust Extraction System

    Western Air Ducts Retrofits Intelligent LEV Solution at City of Oxford College The proffesionally equiped woodworking workshop at the Rycotewood Furniture Centre, at the City of Oxford College city centre campus, is a key resource for the many students of furniture design and ...


    By Inteliair Ltd

  • Let’s Talk About the Design of Cartridge Dust Collectors

    When it comes to choosing a cartridge filter, the choice usually depends on the application. Systems with finer particles require a cartridge filter, and these come in the choice of two. Surface and Depth-Type Filters A surface filteris ideal when filtering remains of similar-sized particles. Depth-type filters capture pollutants and particles ...


    By ProVent, LLC

  • Combination filters

    Simply defined, a combination filter is one that does at least one other processing job at the same time as filtering a suspension. The classic example, of course, is the packed bed of activated charcoal, which acts as a remover of chemical impurities from the suspension, as well as removing dust particles - although this is actually not a very good example, because it is primarily an adsorber, ...

  • Case study - Mining equipment cleaned with Ivey-sol prior to painting. used to remove residual oils and coal dust. successful application

    It was excellent, it worked very well It took all the oils and coal residues off in a fraction of the time it normally takes when using just high pressure hot water. It allowed us to clean and prep the equipment for painting in 1 verses 2 days". Post Treatment Water Following Ivey-sol Treatment of Heavy Waste-oil Contaminated Soils at a Refinery Site. The precipitation of the oil was effected ...


    By Ivey International Inc.

  • What Do Wet Dust Collectors Do?

    Wet dust collectors are ideal for many operations, which include scrubbing, washing, and obscuring the pollutant out of the air and collecting it as a wet slush. Wet dust collectors come in various shapes and sizes, which mean you will always have a wide range to browse through, before you treat your business to this ...


    By ProVent, LLC

  • Portable Dust Collectors can be very useful

    Thousands of industrial and commercial settings worldwide use portable dust collectors. Processes that create fumes, dust, mist or smoke require this system, as it is not only essential to remove the dust, but also ensures both the employees and work environment are safe. Design of a Portable Dust Collector ...


    By ProVent, LLC

  • What Do Wet Dust Collectors Do?

    Wet dust collectors are ideal for many operations, which include scrubbing, washing, and obscuring the pollutant out of the air and collecting it as a wet slush. Wet dust collectors come in various shapes and sizes, which mean you will always have a wide range to browse through, before you treat your business to this necessary, luxury device. These are ideal systems for many industries and ...


    By ProVent, LLC

  • Keep your air clean with Wet Dust Collectors

    Wet dust collectors use liquid — often but not always simple water — to capture and separate dust, mist, fumes, and other particulate matter from a stream of flowing gas — often but not always simple air. Some wet dust collectors spray liquid in a sheet across the stream of gas; others bubble the gas through ...


    By ProVent, LLC

  • Which Portable Dust Collector Is Right for Your Workplace?

    When it comes to clean air regulations and dust collection systems, then these are nothing new. However, the new thing is the pressure that is being put on the implementation of those regulations. Even the smallest of companies and shops go through expensive fines if they do not obey this rule. Small areas may not need air filtration frequently and may also not have the required space to install ...


    By ProVent, LLC

  • How a wet dust collector can prevent a violent explosion (and more!)

    Explosive dust is a major concern among metal finishing operations, and recent changes in the National Fire Protection Association regulations have made compliance more difficult. Metalwork grinding and sanding produces a fine metallic dust that, even after being filtered from the air, can smolder, catch fire, or even explode violently if it’s exposed to a spark. Aluminum, lithim, ...


    By ProVent, LLC

  • Here’s What I Know About Dust Collection Booths

    If there is too much dust in the workplace, it can cause many problems and the most serious is the short and long term health problems. Not only does dust make the place all messy and dusty, but also means you and your employees are breathing in harmful particles. The problems usually start off by allergic reactions and can turn into major respiratory problems. Also, a large amount of dust at ...


    By ProVent, LLC

  • What are filter aids?

    Filter Aids” is a group of inert materials that can be used in filtration pretreatment. There are two objectives related to the addition of filter aids. One is to form a layer of second medium which protects the basic medium of the system. This is commonly referred to as “precoat”. The second objective of filter aids is to improve the flow rate by decreasing cake compressibility ...

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you