dust separation Articles

  • Wet Dust Collectors: Options and Operations

    A wet dust collector comes in the choice of three variations and these are: gas/liquid contact, gas/liquid separation and gas humidification. The difference between the three is based on how the dust is collected and separated inside the system. A wet dust collector, also known as a wet scrubber, ...


    By ProVent, LLC

  • Packed Cyclone Separator Removes Dust Particles While Recycling Process Liquids; New Solutions to Plant Problems

    Problem: The Monomeros Colombo Venezolanos plant in Barranquilla, Colombia, jointly operated by the South American countries of Colombia and Venezuela, produces caprolactam for the textile industry and various chemical fertilizers for agricultural use. Recently agricultural plant capabilities were increased with the addition of process units to improve the production and quality ...


    By CR Clean Air Group, LLC

  • Uni-wash wet dust collectors reduce industrial dust hazards

    Metal dust — it can be a fabricator’s worst nightmare. In particular, the combination of dry aluminum dust and steel dust is literally a disaster waiting to happen. The National Fire Protection Association has a list of metal dusts and the specific PPM that the air can hold of each before the serious risk of an explosion arises. As a worksite approaches the PPM safety limits of one or ...


    By ProVent, LLC

  • The Atritor Turbo Separator

    Due to the changes in restrictions and the increase in the cost of landfill, the Gypsum Industry is looking for an alternative to handle the estimated 300,000 tons of new build plasterboard waste generated every year. The traditional way of separating gypsum from its backing is to use hammer mills, in conjunction with sieves, which is costly and generates a lot of dust.Atritor offers reprocessing ...


    By Atritor Limited

  • Chemical Industry: Packed Cyclone Separator Removes Dust Particles While Recycling Process Liquids Chemical Industry New Solutions to Plant Problems Case study

    Problem: The Monomeros Colombo Venezolanos plant in Barranquilla, Colombia, jointly operated by the South American countries of Colombia and Venezuela, produces caprolactam for the textile industry and various chemical fertilizers for agricultural use. Recently agricultural plant capabilities were increased with the addition of process units to improve the production and quality ...


    By CR Clean Air Group, LLC

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

  • Keep your air clean with Wet Dust Collectors

    Wet dust collectors use liquid — often but not always simple water — to capture and separate dust, mist, fumes, and other particulate matter from a stream of flowing gas — often but not always simple air. Some wet dust collectors spray liquid in a sheet across the stream of gas; others bubble the gas through ...


    By ProVent, LLC

  • Controlling Dust and Bioaerosols at a Biosolids Composting Faclity

    Studies at enclosed Longmont, Colorado project evaluate exposure level of employees. Operational changes reduce dust, endotoxin and A. Fumigatus by 90 percent. WHEN dealing with public health issues and composting, attention has been predominantly focused on potential exposure from the release of Aspergillus fumigatus (A. fumigatus) from composting facilities. Numerous studies were conducted to ...


  • Reflectance spectroscopy as a tool for settled dust monitoring in office environment

    The aim of this study was to develop a technique based on reflectance spectroscopy that is capable of evaluating small amounts of sediment dust. Laboratory simulations and two field experiments conducted in the same office environment were carried out to generate particulate dust samples based on multivariate data analyses. Spectral measurements were taken using either a laboratory Quantum 1200 ...


    By Inderscience Publishers

  • Rectangular Vibrating Screen Separators: Uses and Applications

    Vibratory screeners come in a wide range of sizes and configurations to support a diverse set of applications. Choosing the right machine for your purposes can be a daunting task — particularly if you’re upgrading older equipment that has been used for years. Technology has changed considerably, and there’s a good chance what was best for ...


    By VibraScreener Inc.

  • Redirection of Timber Dust from Landfill to Agricultural Use: Mayco Industries

     Background Located in the industrial area of a Brisbane suburb, Mayco Industries Pty Ltd (Mayco) manufactures kitchens for residential and high rise markets. Their factory is one of the largest in Queensland, producing between 35 and 55 kitchens per week, and employs 86 staff, 20 of which work on a casual basis. Both natural timber and manufactured board are used by Mayco to ...


  • Characterizing potential water quality impacts from soils treated with dust suppressants

    Received for publication April 24, 2008. Two separate laboratory experiment series, surface runoff and steady-state seepage, were performed to determine if dust suppressant products can be applied to soils with an expected minimal to no negative impact on water quality. The experiments were designed to mimic arid field conditions and used two soils (clayey and sandy) and six different dust ...

  • Impact lead the way in paper and glass separation

    Impact Air Systems was recently contacted by one of the UK's leading recycling led waste management companies to help them improve the process following the recent introduction of domestic glass into the material stream. The company involved have requested to remain anonymous, but currently operate 6 large scale operations in the UK.   We were called to their facility in the West ...


    By Impact Air Systems

  • Air Separation Plants and the Use of Oxygen Monitors

    Air separation plants are critical for many different industries, from clean energy to manufacturing. Nowadays, cryogenic is the most common type of distillation used to separate air into its component gases - nitrogen, oxygen, and inert gases including helium and argon. If your industry relies on air separation for product development or manufacturing, then knowing how the process works is ...

  • Pleatable UPE membrane media in pulse-cleaned dust removal air applications

    Media Selection For initial tests, three media were selected for comparison. These structures are all designed for use in pulse-cleanable cartridges, with processing on blade pleaters. Arioso™ M7001-11 is a Solupor® ultra-high molecular weight polyethylene (UPE) membrane designed for F9/MERV16 efficiency at very low resistance laminated to a 200 gsm, stiff, high permeability ...

  • The true value of magnetic separators and metal detectors in bulk handling

    Introduction The purpose of a bulk material handling may be to transport material from one of several locations to an ultimate destination or to process material such as ore in concentrating and smelting or handling materials for manufacturing. The handling of dry materials in loose bulk form involved the extensive use of static machinery such as belt conveyors, screw conveyors, and various ...


    By Eriez Magnetics Europe Ltd

  • Case study - Mining equipment cleaned with Ivey-sol prior to painting. used to remove residual oils and coal dust. successful application

    It was excellent, it worked very well It took all the oils and coal residues off in a fraction of the time it normally takes when using just high pressure hot water. It allowed us to clean and prep the equipment for painting in 1 verses 2 days". Post Treatment Water Following Ivey-sol Treatment of Heavy Waste-oil Contaminated Soils at a Refinery Site. The precipitation of the oil was effected ...


    By Ivey International Inc.

  • Advantages and basic facts for the use of Lenzing PROFILEN based filter media

    Normal PTFE filter bags have a very good chemical resistance but on the other hand they do not have a high dust separation efficiency. Lenzing PROFILEN® is a compromise between a high efficiency and a high flow rate after cleaning of gases with all the positive aspects of normal PTFE bags. Basics To acquire a better feeling and understanding for the advantages of Lenzing PROFILEN® it is necessary ...

  • Energy efficiency waste extraction upgrade against the clock

    When Impacts project team were challenged with the gauntlet of replacing a twin extraction system at Greenshires in a 24-hour shutdown they knew they had a challenge. After many years of suffering unreliability of an environmentally unfriendly waste system, Greenshires - Leicester, had no option but to replace it with the latest extraction system solutions. Impact Air Systems were called to the ...


    By Impact Air Systems

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you