edxrf spectrometer Articles

  • Quantitative Analysis of Fluorine (9F) by EDXRF

      Fluorine compounds possess a wide range of properties, including flame retardance, water repellency, anti-fouling property, and heat resistance, and are therefore used in a wide range of fields from articles for everyday use to semiconductors. However, since the 1980s, the problems of global warming and ozone depletion in addition to the potential for bioaccumulation have led to ...

  • Using EDXRF to quantify the amount of Metals in Asphalt Binders

    This article reviews these sources and proposes a scheme for measuring and quantifying the amounts of metals in their source materials used to bind asphalt used in making roads. The use of bench top EDXRF to characterize binders before blending them into asphalt cements is possible because the metal values are in the 10s – 1000s of ppms and are readily monitored. ...


    By Xenemetrix Ltd.

  • Xenemetrix EX-3600M (EDXRF) spectrometer analysis of the major elements in cement and compliance with ASTM Method C-114

    Energy Dispersive X-ray Fluorescence (EDXRF) can play a vital role in this industry by giving accurate analytical results in a short time.  ASTM C-114 is the test method used for the analysis of hydraulic cements. .  The overview of Xenemetrix EX-3600M (EDXRF) spectrometer analysis of the major elements in cement and compliance with ASTM Method C-114 will be described in this ...


    By Xenemetrix Ltd.

  • EDXRF Analysis of Sulfur and Other Elements in Oil

    The concentrations of sulfur substances in fuel oil, which greatly contribute to air pollution and acid rain, are regulated by law in many countries, and these regulations are becoming stricter with the growing concern about their impact on the environment and the consequences for society. Here, using the easy-to-operate EDX-720 energy dispersive X-ray fluorescence spectrometer, we determined the ...

  • Determination of K shell parameters of silver using high resolution HPGe detector spectrometer

    The K shell parameters such as K shell photoelectric cross–section at K shell binding energy, K shell jump ratio, K shell jump factor, the Davisson–Kirchner ratio and K shell oscillator strength of silver have been determined using high resolution HPGe detector coupled to 16K multichannel analyser. In this method the K X–ray photons in the energy region from 8 to 52 keV are ...


    By Inderscience Publishers

  • Quantitative analysis of iron in flour

    Abstract   A quantitative analysis of Iron in flour via Xenemetrix EDXRF Laboratory Spectrometer System was performed by model EX-3600M. The minimum detection limit for Fe in flour matrix was determined to 0.8 ppm at 3 sigma. Objective  To design an easy method by using EDXRF technique for quick and convenient measurements of Fe in flour at the level ...


    By Xenemetrix Ltd.

  • Minimum detection limits of several different elements in water and in oil

    Abstract  The minimum detection limits of several different elements in water and in oil solutions were determined on X-Calibur with a SDD detector installed or a Si-PIN diode detector installed. The MDL was determined at 3 sigma and 300 seconds acquisition times. The result is reported here. Objective  To perform a quantitative comparison between the ...


    By Xenemetrix Ltd.

  • Application Note - Comparison of minimum detection limits on X-Calibur with SDD detyector or Si-PIN diode detector

    ABSTRACT - The minimum detection limits of several different elements in water and in oil solutions were determined on X-Calibur with a SDD detector installed or a Si-PIN diode detector installed. The MDL was determined at 3 sigma and 300 seconds acquisition times. The result is reported here. OBJECTIVE - To perform a quantitative comparison between the performance of ...


    By Xenemetrix Ltd.

  • Quantitative Analysis of Geological Samples- X-Calibur

    Abstract Quantitative and qualitative analysis of geological samples (rocks and river sediments) was performed on Xenemetrix EDXRF Benchtop Spectrometer System, model X-Calibur  Objective: Perform XRF measurements on certified geological reference materials to build calibration curves for the major oxides (Na2O, MgO, SiO2, Al2O3, SiO2, P2O5, ...


    By Xenemetrix Ltd.

  • Case study for cement field

    Energy Dispersive X-ray Fluorescence (EDXRF) can play a vital role in this industry by giving accurate analytical results in a short time.  ASTM C-114 is the test method used for the analysis of hydraulic cements. .  The overview of Jordan Valley’s EX-3600M (EDXRF) spectrometer analysis of the major elements in cement and compliance with ASTM Method C-114 will be described in this article.  ...


    By Xenemetrix Ltd.

  • X-ray analysis of tin solders aids RoHS/WEEE compliance

    The hottest topic in the electrical and electronic industry for some time has been the introduction of several directives with the same implications, the Chinese Administrative Measure on the Control of Pollution Caused by Electronic Information Products, the European Union (EU) and Japanese RoHS and WEEE directives. These regulations restrict the presence of lead, and other elements, in ...


    By PANalytical

  • Application note issue #5 - Cement Analysis August 2017

    Cement analysis using FP program (Fundamental Parameters) Cement is a blend of several minerals. It is critical to control the elemental composition and properties such as strength, setting, time and color. ED-XRF is being used to analyze the raw components, raw meal, clinker, and the final cement product (Na, Mg, Al, ...


    By Xenemetrix Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you