electrical laboratory safety Articles

  • Environmental, Safety & Health Compliance System pays off for Brookhaven National Laboratory

    Brookhaven National Laboratory (BNL), one of ten national laboratories managed by the U.S. Department of Energy (DOE) Office of Science, is a world leader in scientific research. Its scientists are known for their work in nuclear and high-energy physics; environmental and energy research; neurosciences, medical imaging, structural biology and nano-technology. BNL conducts research that enhances ...


    By IHS

  • Safety Tips: Holiday Lighting

    The holiday season is upon us and nothing is more festive than outdoor holiday decorations. While the final look is certainly important, it is extremely necessary to guarantee that you don’t get hurt in the process of installing your decorations. The best outdoor decorations are gorgeous as well as safe. As a homeowner, safety should be the first priority when preparing your holiday ...


    By EHS Insight

  • Key issues of ultrafiltration membrane water treatment plant scale-up from laboratory and pilot plant results

    Industrial-scale ultrafiltration (UF) membrane systems have gained wide acceptance for producing safe drinking water. Laboratory and pilot plant studies are often carried out prior to the design of full-scale water treatment plants. Emphases are laid on how accurately these laboratory and pilot plant studies represent actual industrial-scale systems and the limitations. A case study which ...


    By IWA Publishing

  • Safety corner - Ergonomic considerations for the wastewater treatment plant

    If you have ever had your golf swing assessed or changed the height on your desk chair, you have had an ergonomic experience. Ergonomics is an assessment of work spaces to reduce physical injury produced by repetitive job requirements. Ergonomics considerations cross every work type, from golf pros to lab technicians. Review of body mechanics while performing a job, with options of change to ...


    By GillTrading.com, Inc.

  • Modelling oil degradation in electric transformer oil under typical loads

    In testing transformer oils for durability, it is desirable to use typical transformer operating conditions with appropriate allowances for factor of safety against temperature and voltage. The kinetics of degradation of used type II transformer oil with original flash point of 148?C, pour point of 51?C, and water content of 4 ppm was investigated. Assuming that the oil temperature in models Pr01 ...


    By Inderscience Publishers

  • 10 Dumb Things Smart People Do When Testing Electricity

    Be safe when testing electricity. Quick reminder of what NOT to do when taking electrical measurements. Anyone who makes their living by working with electricity quickly develops a healthy respect for anything with even a remote chance of being “live.” Yet the pressures of getting a job done on time or getting a mission-critical piece of equipment back on line can sometimes ...


    By IndustryFriend

  • Case study - Safety, Protection against corrosion and cabinet pressurisation in refineries

    The environment in a refinery is highly corrosive. This makes it necessary to deploy control systems not only to protect staff but also to protect the equipment controlling the processes, in order to ensure their reliability. Bioconservacion has equipment that is specially designed for the safety of staff, and for protecting against corrosion in control rooms and cabinet pressurisation equipment. ...


    By Bioconservacion SA

  • Fibre optic sensors as a non–destructive tool for structural monitoring

    Structural monitoring is a diagnostic tool for detection of defects/damages and for scheduling maintenance operations. It is essential to determine the safety of the structures by Non–Destructive Testing (NDT) for evaluation of strength/integrity. This assessment is required for the repair, rehabilitation and life extension of the structure. Fibre Optic Sensors (FOS) are attractive sensing ...


    By Inderscience Publishers

  • Open Burn/Open Detonation

    Introduction: Open burn (OB) and open detonation (OD) operations are conducted to destroy excess, obsolete, or unserviceable (EOU) munitions and energetic materials. In OB operations, energetics or munitions are destroyed by self-sustained combustion, which is ignited by an external source, such as flame, heat, or a detonation wave. In this case, an auxilliary fuel may be added to initiate and ...

  • Highland Tank 50,000 Gallon Oil/Water Separator installed at Con Ed Mott Haven Power Distribution Center

    Before the Brooklyn Bridge spanned the East River, before the Statue of Liberty first graced New York Harbor, and before skyscrapers rose above New York City's streets, the utility companies that would eventually become Con Edison were already building the energy infrastructure needed to fuel and sustain the city's growth. Today, Con Edison operates one of the largest and most complex — yet ...

  • Case Study - MicroConnex

    Upgrading from an old atmospheric evaporator to a new ENCON Thermal Evaporator saves company $24,600 per year! MicroConnex is a leading supplier and production partner for flex circuits and laser micro-machining based near Seattle Washington. Originally founded in 1995 as a research and development company, MicroConnex currently occupies over 18,000 square feet of office, laboratory ...


    By ENCON Evaporators

  • World Forum to Examine Latest Microgrid Advances and Opportunities

    Interest in microgrids as a strategy for ensuring energy security and reliability is growing worldwide, especially in the wake of events such as Hurricane Sandy. Military installations, hospitals, data centers and remote off-grid regions that must have dependable power – no matter what – are increasingly turning to the microgrid paradigm. This is helping to drive a projected 330% ...

  • Glasswashers – what are the choices?

    Camlab have many years of experience in providing the right glasswashers and disinfectors for your application. Sometimes it’s difficult to know what you need to purchase, the ...


    By Camlab Limited

  • CPSC lead in products testing

    Recent changes to the Consumer Product Safety Commission’s (CPSC) program on allowable levels of lead in products have prompted new rounds of testing. As a Manufacturer (or if you are anywhere in the Supply Chain for any product sold in the United States), you are responsible for monitoring and reporting the lead content in your product. There are threshold values of allowable lead in products as ...

  • Matrix Gemini LIMS at work in the Nuclear Industry

    Bradwell nuclear power station is located on the Dengie peninsula at the mouth of the River Blackwater in Essex. Construction of Bradwell power station began in December 1957 and electricity generation started in 1962. It had two Magnox reactors producing 242 Megawatts of electricity. It could supply enough electricity to meet the combined needs of three towns the size of Chelmsford, Colchester ...


    By Autoscribe Informatics

  • Increased demand for XRF analyser hire

    Steve Drake, NDT Market Manager at Ashtead Technology believes that XRF is one of the most important technologies in the company’s fleet of NDT and environmental testing instruments. “With a small amount of training, almost anyone can implement detailed inspections in a wide variety of applications, and with most instruments being lightweight and robust, XRF analysers are among the ...


    By Ashtead Technology Ltd

  • All in One Unit for GC Applications

    Leman Instruments is a leading European company, specialised in standard products, OEMs and in custom designed realisations involving high purity H2, N2, zero air, combined solutions for FIDs, GCs, purge air generators, CH4 & CO2 scrubbers, N2 and multigas for LCMS with high level of communications involving Ethernet, USB, RS 485 and ...


    By Leman Instruments SAS

  • Photovoltaics: Basic Design Principles and Components

    If you are thinking of generating your own electricity, you should consider a photovoltaic (PV) system—a way to generate electricity by using energy from the sun. These systems have several advantages: they are cost-effective alternatives in areas where extending a utility power line is very expensive; they have no moving parts and require little maintenance; and they produce electricity ...

  • The Light at the End of the Tunnel - How to Successfully Operate a UV Disinfection System

    ABSTRACTOver the past ten years, ultraviolet (UV) technology has become a commonly applied method of disinfecting of wastewater effluent. UV disinfection involves passing wastewater effluent through a confined chamber with rows of underwater lamps emitting UV energy. Viruses and bacteria become inactivated upon exposure to dosages of UV energy, thereby disinfecting the wastewater. The UV system ...

  • Fukushima Meltdown Hastens Decline of Nuclear Power

    On May 5, 2012, Japan shut down its Tomari 3 nuclear reactor on the northern island of Hokkaido for inspection, marking the first time in over 40 years that the country had not a single nuclear power plant generating electricity. The March 2011 earthquake, tsunami, and subsequent Fukushima Daiichi nuclear meltdown shattered public confidence in atomic energy, thus far making it politically ...


    By Earth Policy Institute

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you