electrical safety equipment Articles

  • Electric Safety in the Workplace

    Every day, in every business, there is one bill the employer will pay and that is the electricity bill. Electricity is used constantly, whether it is boiling a kettle, using a computer or equipment. It is intrinsic to our lives and is vital for our day to day activities. It is easy to take for granted; every now and then we are reminded of its importance. An example of this is when there is a ...

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Bioconservacion at the CEPSA Chemical Plant

    CEPSA continues to trust in Bioconservacion solutions for the prevention of corrosion in electrical control rooms. In CEPSA's different refineries we have already installed equipment to regulate corrosion and pressurisation in electrical rooms. We recently published an article on this subject on our blog; to read the article ...


    By Bioconservacion SA

  • Environmental issues and management strategies for waste electronic and electrical equipment

    One of the great technological advancements of the 20th century has been the worldwide development of information access and communications through electronic technology. With the introduction of new technologies inevitably comes the issue of the management of discarded hardware. The growth of waste and recyclable material from the electronics and electricity age has been remarkable. The ...

  • What is Intrinsic safety and ATEX?

    What is intrinsic safety? Intrinsic safety (IS) is a low energy signalling technique that ensures the safe operation of electrical equipment in hazardous areas by limiting the energy – both electrical and thermal – available for ignition. ...


    By Hansford Sensors

  • Safety Tips: Holiday Lighting

    The holiday season is upon us and nothing is more festive than outdoor holiday decorations. While the final look is certainly important, it is extremely necessary to guarantee that you don’t get hurt in the process of installing your decorations. The best outdoor decorations are gorgeous as well as safe. As a homeowner, safety should be the first priority when preparing your holiday ...


    By EHS Insight

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Purpose and value of safety and health audits

    Untitled Document Purpose and value of safety and health audits Introduction/Overview The word 'audit' puts many ...


  • How to prevent electrical injuries at work and at home

    At CH2M, we’re committed to safety; in fact, working safely is embedded into everything we do. For 10 months we’re focusing on a different hazard – the Top 10 safety hazards that reflect the most common risks and hazards we face every day in our jobs at CH2M, and ...


    By CH2M Hill Companies, Ltd.

  • Select Top Suppliers for Best Electric Pressure Washers

    Choosing the perfect cleaning equipment for your commercial or industrial cleaning needs is not an easy task. Everyday, newer and better machines appear on the market, promising faster and more efficient cleaning. However, not all these machines perform as expected. If you opt for cheap versions of electric pressure washers simply to save money, you could easily be purchasing a replacement in a ...


    By Daimer Industries Inc.

  • The electric car: a brief history and what’s next?

    At the end of the 19th century, any vehicle not pulled by a horse or mule was considered an alternative power vehicle, powered by steam, electricity or gasoline. But oil was discovered in Texas in 1901 and by 1920, gasoline fueled internal-combustion engine vehicles dominated the marketplace. Electricity and steam powered vehicles became distant also-rans. Oil was cheap, effective, readily ...


    By BSC Sustainability Services

  • Pumping Up Safety, Efficiency and A Smarter Design

    The Opportunity The Progress Energy’s Lee Plant, located in Goldsboro, N.C., originally enlisted nine vertical sump pumps within the plant as yard drain pumps – pumps that have motors that are located above the pump and a line shaft that extends down into the length of the sump – whereas the pump is actually at the bottom of the sump. The pumps were enlisted to remove ...


    By Gorman-Rupp Co.

  • Curtailing Construction’s Fatal Four – Eliminating Injuries from Electricity

    The “Fatal Four” of construction are falls, electrocutions, workers being caught in or between objects, and worker being struck by objects. In the United States, these hazards consistently account for over 50% of construction worker deaths annually. This translates into the deaths of over 899 workers on a yearly basis. In our four part blog post series, we will examine each hazard and ...


    By Intelex Technologies Inc.

  • 10 Dumb Things Smart People Do When Testing Electricity

    Be safe when testing electricity. Quick reminder of what NOT to do when taking electrical measurements. Anyone who makes their living by working with electricity quickly develops a healthy respect for anything with even a remote chance of being “live.” Yet the pressures of getting a job done on time or getting a mission-critical piece of equipment back on line can sometimes ...


    By IndustryFriend

  • Select Top Suppliers to Opt Best Electric Pressure Washers

    Choosing the perfect cleaning equipment for your commercial or industrial cleaning needs is not an easy task. Everyday, newer and better machines appear on the market, promising faster and more efficient cleaning results. However, not all these machines perform as claimed. If you opt for cheap versions of electric pressure washers simply to save some money, you could easily be purchasing another ...


    By Daimer Industries Inc.

  • Equipment deficiencies: How well are they being managed? (Part 1 of 2)

    A key element of a successful mechanical integrity (MI) program is the equipment deficiency process. In addition to being a requirement and an MI emphasis area in many OSHA National Emphasis Program inspections, a facility’s equipment deficiency process is a vital management system for ensuring safe process operations. This process helps ensure that deficient equipment conditions are identified ...


    By ABS Consulting

  • Tank terminal demonstrates the electrically operated solution for ESD Valves - case study

    Overview Since the disastrous fire at the Buncefield fuel depot in 2005, much has been done to ensure that such a catastrophic accident should not happen again. Led by COMAH (Competent Authority/Industry Standards Task Group), safeguards have been put in place by the petroleum industry to provide additional safety and environmental protection to tank storage installations. Endorsing the ...


    By Rotork

  • Safety implications In the Waste industry following implementations of Atex directives

    Summary: Introduction of ATEX Directives 95 and 137 in July 2003 increased pressure on all industries dealing with potentially explosive atmospheres, including the waste industry. Both the equipment and the operating procedures had to be reviewed in order to comply with the directives. ATEX is the acronym of French words ATmosphere Explosives. In the UK, although the Dangerous Substances and ...


    By Biogas Technology Limited

  • Case study - Safety, Protection against corrosion and cabinet pressurisation in refineries

    The environment in a refinery is highly corrosive. This makes it necessary to deploy control systems not only to protect staff but also to protect the equipment controlling the processes, in order to ensure their reliability. Bioconservacion has equipment that is specially designed for the safety of staff, and for protecting against corrosion in control rooms and cabinet pressurisation equipment. ...


    By Bioconservacion SA

  • Safety and Reliability in High Mast, Light Tower and Area Lighting

    When illuminating a work area, sporting complex, roadway, or any populated area, safety and reliability are of the utmost importance. Without proper illumination, risk for accidents and injury is increased. Power outages, mechanical or equipment failure, or acts of nature can introduce unwanted hazards into the environment. Advances in LED technology have solutions that address these safety ...


    By Larson Electronics LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you