electro-analytical instrument Articles

  • Spectro Scientific`s Third Edition Of The Oil Analysis Handbook

    It has been over two years since the publication of the first edition of Spectro Scientific’s In-Service Oil Analysis Handbook. Our goal was to compile a comprehensive reference book of common in-service oil analysis techniques to help readers understand and choose the right technique and instrumentation for their needs. In-service oil analysis for condition based maintenance covers a wide ...


    By Spectro Scientific

  • New Oil Analysis Handbook

    Third edition contains more How To articles and more case studies It has been more than two years since we published the first edition of the Oil Analysis Handbook. Our original goal was to compile a ...


    By Spectro Scientific

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Hydraulic Fracturing and the Environment Whitepaper - Analytical and Measuring Instruments

    The recovery of natural gas and oil from untraditional wells is necessary for the economic stability of the United States. Shale gas deposits are deep below the earth’s surface and recovery of gas is expensive and requires millions of gallons of water mixed with chemicals, known as "fracking solution". Most fracking solution stays underground or returns to the surface mixed with formation ...

  • Instrumental methods and challenges in quantifying

    Abstract Increased interest in the fate, transport and toxicity of polybrominated diphenyl ethers (PBDEs) over the past few years has led to a variety of studies reporting different methods of analysis for these persistent organic pollutants. Because PBDEs encompass a range of vapor pressures, molecular weights and degrees of bromine substitution, various analytical methods can lead to ...


  • Understanding Oil-in-Water Instrument Specifications

    The measurement capabilities of oil-in-water analysis methods are described by several analytical figures-of-merit. Examples are: Range (Linear and Dynamic) Limit of Detection (LOD) Limit of Quantification (LOQ) Precision (Repeatability and Reproducibility) Sensitivity Accuracy Response Time Some or all of these are often specified by customers in the bid packages issued when selecting a ...

  • Tekran instruments—monitoring around the world

    Tekran provides trace-level mercury analytical and monitoring technology for a variety of applications including laboratory-based sample analysis, continuous point-source emissions and ambient air monitoring. This article focuses on and highlights the results of an application of Tekran’s Ambient Air Mercury Speciation System. In contrast to most other heavy metals, mercury (Hg) and mercury ...

  • Determination of Trace Lead, Poly-Phenols and Tannins in Wines Using a Single Analytical Instrument

    The manufacturing of wine and other fermented beverages has typically been a fairly simple process. Historically, the expertise of the sage wine-master was used to gauge the quality of the product. Today, many environmental concerns, health factors, and government rules, prompt the producers of fine wines to monitor several important components in the grape, the fermentation vats, and in the ...


    By Buck Scientific Inc

  • Tech update: Plant instrumentation - food engineering

    Sensors and other devices are the foot soldiers in automation architecture, but most food and beverage manufacturers still are looking for full value. You know an equipment category has arrived when it starts getting its own industry-specific center. For the food production sensors that do the heavy lifting in instrumentation technology, that day could arrive earlier rather than ...


    By Hardy Process Solutions

  • New TOC sensor wins Gold IBO award for portable instrument design

    In 2006, the USEPA singled out the distribution system as the most vulnerable component of a utility’s drinking water system. In response, many waterworks are taking a closer look at how they may protect the public’s drinking water. One option is to place online water quality panels throughout the distribution system to detect a change in the baseline water quality. The cost of implementing a ...


    By GE Analytical Instruments

  • Instrumented drop weight impact test set-up design and assessment

    Instrumented impact tests are useful to characterise the dynamic behaviour of materials as they provide continuous load, strain and deflection histories of an impact test. When these tests are used for low strength-to-weight ratio materials like concrete, considerable parasitic effects of inertial loads are manifested in the test records. With proper choice of the test parameters these parasitic ...


    By Inderscience Publishers

  • Instrumentation, methods & analysis tools for comprehensive condenser testing, monitoring & troubleshooting

    Abstract Proper monitoring philosophy in combination with available, accurate and reliable instrumentation for comprehensive condenser performance testing, monitoring and troubleshooting is presented. Practical engineering guidance resulting from the use of advanced instrumentation with proven utility has contributed to the identification of new beneficial performance indicators. ...


    By Intek, Inc.

  • DHL analytical - Case Study

    Quantum Leap in productivity According to John Dupont, General Manager of Operations, “DHL Analytical, Inc. has been on the leading edge of laboratory innovation for many years. Our vision was to move towards a paperless laboratory, with the realization that the current generation of electronic documents can be produced at almost all points in our process. The trick for us ...


    By Poplar Solutions, LLC

  • Natural Gas: Complete Analytical Solution

    Chromatotec® has developed in its Research & Development laboratories, a new instrument for hydrocarbon (C1-C6+) measurements and calorific values as well as WOBBE index computation. This analyzer is based on chromatography principle using a Thermal Conductivity Detector (TCD). The sample will be separated into the column and quantified by the detector. A difference of thermal ...


    By Chromatotec Group

  • Determining analytes in food, soil and sludge

    Customer: Institute of Sustainable Halophyte Utilization, Pakistan The Institute of Sustainable Halophyte Utilization, University of Karachi has been established as an elaborate facility for research of various halophytes to serve as a source of fodder, forage, biofuel, oil seeds, medicinal plants and other possible usages. Application: Determining analytes in food, soil ...


    By BÜCHI Labortechnik AG

  • Method X: Determination of metal concentrations in emissions from stationary sources (instrumental analyzer procedure) case study

    Method X is an instrumental analyzer procedure for the determination of multiple metals using x-ray fluorescence as an analytical technique. Method X specifies the criteria for accuracy stability and precision that must be met by an x-ray fluorescence based instrument analyzer. Method X also describes the emission test procedures associated with an x-ray fluorescence based metals measurement ...


    By Cooper Environmental

  • Exoscan FTIR instrument system can easily be used in the lab or taken to the field for routine analysis.

    Infrared spectroscopy has long been recognized as a selective and sensitive technique for analysis and characterization of surfaces. From material identification to quantitative analysis, infrared analyses can establish if a surface is composed of the correct material, has the proper coating thickness, is free of contaminants, is properly cured, or has the correct properties for the next step in ...


  • Who says materials analysis can’t be fun? Oxford Instruments brings “smart science” to the “smart phone”

    Everyone who works or studies in the world of materials and elemental analysis agrees on two guiding principles: Accuracy of analysis is vital and speed of analysis is critical where time equals money. Oxford Instruments’ new “Materials Analysis eXpert” App just released for smartphone and tablet ticks both boxes, delivering an easy-to-use app combining a handy periodic table ...


    By Oxford Instruments plc

  • Texas Instruments - A Novel Separation Technique for the Analysis of Trace Levels of Atmospheric Contaminants in Inert Semiconductor Process Gases

    A NOVEL SEPARATION TECHNIQUE FOR THE ANALYSIS OF TRACELEVELS OF ATMOSPHERIC CONTAMINANTS IN INERTSEMICONDUCTOR PROCESS GASES J. Scott McWilliams, Alan Johnson, Charlene Long, Jeremiah D. Hogan*Texas Instruments, Inc.Dallas, TX 75265 Low ppb detection limits for contamination in cylinder gases have been achieved with gas chromatography using a modified gas ...


    By Environics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you