electronic leak detection Articles

  • Leaks and spills - LNAP and DNAPL detection and clean up

    Any tank can leak. Most leaks can be cleaned up and responsible operators need equipment that does what’s needed. With an ATEX Zone 0 certified interface meter site operators can successfully achieve LNAP and DNAPL detection when monitoring petrochemical sites, tank farms, petrol station forecourts, landfills or remediation sites. If site technicians detect ...


    By Geotech

  • Leak detection in semiconductor fab gas processes

    Problem Statement Often times in semiconductor fabs moisture levels are monitored to ensure that products aren’t damaged by excess moisture in the process. If there are above normal levels of moisture, pinpointing the source of that moisture can be difficult. The moisture could be evolving from impurities in gas tanks or leaks in the sampling lines. One way to avoid downtime ...


    By CIC Photonics, Inc.

  • Refrigerant leak detection is regulated by the US Environmental Protection Agency (EPA)

    Refrigerant leak detection is a difficult task in some heating ventilation and air conditioning systems or refrigeration and air conditioning systems. Sometimes the most experienced technicians find difficulty discovering a leak, which may be hidden in a system component, in tubing or in an operating or safety control switch. Refrigerant leak detection is a hot topic, following the recently ...


    By Verisae

  • Detect Hydrogen Gas and Flames

    Under day-to-day conditions, people cannot see, smell, or taste the presence of hydrogen gas. Hydrogen, however, is very flammable and requires only a small amount of energy to ignite. In fact, if leaking from a pipe at a high enough pressure, hydrogen gas can self ignite without the aid of an external energy source. Working together, ...

  • Detecting Hydrogen Gas and Fires: Seeing the Unseen

    Hydrogen usage is growing. The general public sees and reads about hydrogen as an alternative fuel for cars. However, the big use for hydrogen is found in hydrocarbon processing and other important manufacturing processes. Hydrogen is the first element on the periodic table and is an essential element in the manufacturing of many of our everyday products. We must have respect for its explosive ...

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Detecting Gases: What You Can`t Smell Can Hurt You

    Walking through a drill-site area, a worker smells rotten eggs and stops tor a minute or two to assess where a gas leak might exist. Rubbing his itchv eves as he investigates further, he notices that he no longer smells the tell¬tale hydrogen sulphide odour. He does not realize that the gas has deadened his olfactory senses and unless he leaves the area within seconds, he could lose ...

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • Is your Plant as tight as you think? Leak Detector for extremely toxic Gases, a Field Test Report

    Leak detection of commodity gases in chemical plants is a day-to-day practice. The sensor technology available for this application is field proven and reliable. No question about it, existing sensors will do the job. However, in plants manufacturing or handling extremely toxic substances, the picture is different. For example, take phosgene. The existing sensor technology for leak detection ...

  • Multiple gas impurity analyses and verification for semiconductor process tools

    With the increased emphasis on the purity of cleaning, etching and treatment gases by the semiconductor industry, advanced analysis instrumentation is required to monitor the electronic specialty gases and to verify the performance of process tools and components. This paper describes new instrumentation and software specifically designed to accomplish ppb level gas analyses in times as short as ...


    By CIC Photonics, Inc.

  • Greenhouse gas emissions and reduction studies using a portable TDL gas monitor

    Boreal Laser's GasFinder is a portable open path gas monitor based on laser technology. GasFinder is uniquely suitable for studies of greenhouse gas emissions. It is specific to the gas of interest, provides one second response and has a broad dynamic range. GasFinder is permanently calibrated and is very small and light (less than 5kg). Alignment is easy and stable. No on-site electronic tuning ...


    By Boreal Laser Inc.

  • Industrial applications – Air analysis in clean air room - Case study

    Context & Challenges To ensure people’s safety and a good repeatability of industrial process, the analysis of ambient air is crucial. Especially, electronic boards are produced in clean air room by complex lithographic process using very reactive chemicals. The nature and concentration of volatile compounds can be different depending on the chemical process and can also vary ...


    By Chromatotec Group

  • Keeping Healthcare/SPD Workers Safe from Exposure: 2 Very Different Options

    Continuous Monitoring vs. Badges Badges are designed to provide the Time Weighted Average (TWA) data for the total exposure period. They contain an absorption medium that reacts with or absorbs and holds the target chemical from the air to be analyzed later, which indicates the exposure after the fact. Badges, sample tubes, and wet chemical methods were the predominant technologies for monitoring ...


    By ChemDAQ, Inc.

  • IR Gas Detector Provides Rapid Response

    The advanced Model IR400 Point IR Combustible Gas Detector from General Monitors features an industry-leading three-second T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and ...


    By General Monitors

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Successful trunk main correlations in Australia, the land of long pipes - Case study

    The Aquasscan TM Successfully locates leaks at distances over 1KM in Sydney. The Gutermann Aquascan TM (Trunk Main) correlator provided a series of high performance correlations in trials performed in Sydney, Australia.  Sydney Water provided a 1.2 KM of 600mm OD Steel trunk main for a series of tests to be performed to evaluate the performance.  The testing was administered ...


    By Gutermann AG

  • Technical and safety practices

    Safety is absolutely paramount in the medical industry, with lives literally at stake if something were o go wrong. Regrettably, this was more than reinforced recently following the tragic news of a death of a newborn at a hospital in Sydney, Australia, after it was mistakenly administered nitrous oxide (N2O) instead of oxygen (O2) in July this ...


    By Geotech

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Case study - New N2O monitor for occupational health and safety

    The new Geotech G200 range of N2O analysers measures N2O at 0-1000ppm or at 0-100 percent with accuracy, speed and ease-of-use.  With options for CO2, O2 and CO, the G200 range can assist anaesthetists and ...


    By Geotech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you