electronic leak detection system Articles

  • Leak detection in semiconductor fab gas processes

    Problem Statement Often times in semiconductor fabs moisture levels are monitored to ensure that products aren’t damaged by excess moisture in the process. If there are above normal levels of moisture, pinpointing the source of that moisture can be difficult. The moisture could be evolving from impurities in gas tanks or leaks in the sampling lines. One way to avoid downtime ...


    By CIC Photonics, Inc.

  • Refrigerant leak detection is regulated by the US Environmental Protection Agency (EPA)

    Refrigerant leak detection is a difficult task in some heating ventilation and air conditioning systems or refrigeration and air conditioning systems. Sometimes the most experienced technicians find difficulty discovering a leak, which may be hidden in a system component, in tubing or in an operating or safety control switch. Refrigerant leak detection is a hot topic, following the recently ...


    By Verisae

  • Detecting Hydrogen Gas and Fires: Seeing the Unseen

    Hydrogen usage is growing. The general public sees and reads about hydrogen as an alternative fuel for cars. However, the big use for hydrogen is found in hydrocarbon processing and other important manufacturing processes. Hydrogen is the first element on the periodic table and is an essential element in the manufacturing of many of our everyday products. We must have respect for its explosive ...

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Detecting Gases: What You Can`t Smell Can Hurt You

    Walking through a drill-site area, a worker smells rotten eggs and stops tor a minute or two to assess where a gas leak might exist. Rubbing his itchv eves as he investigates further, he notices that he no longer smells the tell¬tale hydrogen sulphide odour. He does not realize that the gas has deadened his olfactory senses and unless he leaves the area within seconds, he could lose ...

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • Our drinking water systems are a disaster. What can we do?

    In the wake of the Flint, communities turn to innovative technology and financing to prevent the next crisis. People in developed countries turn on the tap and safe drinking water flows, a dramatic health benefit they tend to take for granted. That complacency was dramatically disrupted last year when children in Flint, Michigan, started testing positive for lead poisoning and the ...


    By Ensia

  • Multiple gas impurity analyses and verification for semiconductor process tools

    With the increased emphasis on the purity of cleaning, etching and treatment gases by the semiconductor industry, advanced analysis instrumentation is required to monitor the electronic specialty gases and to verify the performance of process tools and components. This paper describes new instrumentation and software specifically designed to accomplish ppb level gas analyses in times as short as ...


    By CIC Photonics, Inc.

  • IR Gas Detector Provides Rapid Response

    The advanced Model IR400 Point IR Combustible Gas Detector from General Monitors features an industry-leading three-second T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and ...


    By General Monitors

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • What Else do I Need for my Fuel Cell?

    So, you have bought a Fuel Cell and are ready to start using it. Or are you? Did you plan on any of the ancillary components you might need? Depending on who you buy the ...


    By Fuel Cells Etc

  • While Oil Prices are Down, Get Up on Compliance

    It’s no secret that the oil and gas industry has taken a hit lately, with per-barrel prices dipping to as low as $27. The saturated market and low prices have many companies putting a hold on drilling. While no one in our industry likes dipping oil prices, there are two things you can do to weather the storm until those prices take a (much welcomed) upward turn: Stay up to date on ...


    By ABUTEC LLC

  • Texas Instruments - A Novel Separation Technique for the Analysis of Trace Levels of Atmospheric Contaminants in Inert Semiconductor Process Gases

    A NOVEL SEPARATION TECHNIQUE FOR THE ANALYSIS OF TRACELEVELS OF ATMOSPHERIC CONTAMINANTS IN INERTSEMICONDUCTOR PROCESS GASES J. Scott McWilliams, Alan Johnson, Charlene Long, Jeremiah D. Hogan*Texas Instruments, Inc.Dallas, TX 75265 Low ppb detection limits for contamination in cylinder gases have been achieved with gas chromatography using a modified gas ...


    By Environics, Inc.

  • Gas safety in confined spaces

    A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and ...

  • Gas Safety in Confined Spaces

    Introduction A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and brewing, as ...

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you