Electrostatic Filter Articles on Environmental XPRT

Why choose an electrostatic, washable air filter?

When deciding what type of air conditioner or furnace filter to use, you should keep two things in mind: Airflow and Efficiency. In order to work at its optimum level, the a/c or heating unit requires no restriction to air flow. You should choose a filter that has the least effect on airflow, but removes the most dust from the air. ACI’s electrostatic air filters allow the air conditioning ...

Nov. 16, 2010

By ACI Manufacturing

Wet electrostatic precipitators: A preferred technology for emission control

The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...

Apr. 11, 2016

By Beltran Technologies, Inc.

Non-woven electrostatic media for chromatographic separation of biological particles

The filtration and separation of biological particles has been estimated as 40% of the cost in the manufacture of pharmaceuticals. Liquid chromatography that is the principal method for separating biological particles uses a permanent phase of ultrafine adsorbent particles such as porous silica or resin spheres with particle sizes down to about 1 micron. Speed and resolution are two competing ...

Mar. 6, 2012

By Argonide Corporation

Wet Electrostatic Precipitation Demonstrating Promise for Fine Particulate Control

Editor’s Note: Part l of this two-part feature on wet electrostatic precipitation (wet ESPs) outlines the need for multi-pollutant air pollution control technologies, the basics of wet and dry electrostatic precipitation, the ability of wet and dry ESPs to treat fine particulate, and the use of wet ESP technology at Northern States Power Company’s Sherco Station. Part II will explore the key ...

Jan. 1, 2001

Innovative wet electrostatic precipitators assure competitive edge in acid marketplace

The unsteady global economic recovery continues to subject many core industries to persistent volatility in profits, prices, markets and capital investments. However, some analysts remain optimistic about the global international trade in sulfur in all forms, particularly sulfuric acid. This versatile mineral acid is both the world’s most widely used chemical, and the one with the highest ...

Apr. 11, 2016

By Beltran Technologies, Inc.

Case study - Wet electrostatic precipitators offer cost-effective solution for HZL

An array of complex air pollution issues places the metallurgical industry among the largest potential sources of pollutants, and one of the most tightly regulated industrial sectors. One fully integrated, nonferrous metal producer in India, however, is demonstrating that a company with a determined commitment to environmental protection, energy efficiency and sustainability can succeed in ...

Apr. 11, 2016

By Beltran Technologies, Inc.

Microbial reduction efficiencies of filtration, electrostatic polarization, and UV components of a Germicidal Air Cleaning System

Abstract: This study determined the effectiveness of components of a germicidal air-cleaning system involving filtration, electrostatic polarization, and UV light on the reduction of airborne bacteria and molds. The filter alone, filter and electrostatic polarization combined, and the filter, electrostatic polarization, and UV light were found to be effective (P < 0.05) in reducing a given ...

Jun. 10, 2016

By Dynamic Air Quality Solutions

High efficient cyclone systems with electrostatic recirculation for particulate matter (PM) emission control

The development of new optimized dedusting systems has particular and increasing relevance for atmospheric particulate emission control. Indeed, traditional "particulatetraps" present several disadvantages that foster the search for alternative solutions. Industrial cyclones are, for their robust construction, absence of moving parts and general application, an appropriate technology for emission ...

Sep. 26, 2011

By Advanced Cyclone Systems, S. A.

High-Tech Filters

The current economic situation of the cement industry creates sensitivity regarding off-times and process stability. More stringent air-pollution laws, especially when using waste-derived fuels, are drawing more attention to the off-gas cleaning facilities, usually bag filters. This article does not deal with electrostatic precipitators - as even they have well known disadvantages. By using more ...

Mar. 18, 2009

By Evonik Fibres GmbH

Filter technology to meet evolving regulations

Maguin has developed the Cercat filter for high temperature air pollution control. In this article, David Gambier and Hélène Real outline the technology, as well as installations planned for 2009. Maguin has been present in the waste thermal treatment field since the 1970s. The company’s knowledge has been built through the turnkey supply of thermal treatment units for different kinds of products ...

Mar. 17, 2009

By MAGUIN SAS - a Moret Industries Company

Can protective garments be wearable filters?

Protective garments for medical, civilian safety and military applications range from disposable lightweight fabrics to multilayered fabrics and laminated barrier materials, depending upon the nature of the contamination that threatens the wearer. Usually, only full barrier garments, such as the Level A liquid splash protective garments provide full protection from aerosols, and this is due to ...

Jul. 28, 2011

By American Filtration & Separations Society

Cigarette smoke: size distribution and effects on filters

Cigarette smoke is an important aerosol in the air filtration industry and research. It is an unwanted aerosol and therefore there are many applications for air filtration (ex. cigarette filters, residential and commercial ventilation filters, home air cleaners). Cigarette smoke is especially important to air filter performance for several reasons. First, the size of cigarette smoke particles ...

Jul. 28, 2011

By American Filtration & Separations Society

How do oil mist collectors work? Comparing the different technologies, part II

In our previous article about oil mist collector technology, we discussed the pros and cons of centrifugal mist collectors and filter-based mist collectors. Today, we look at the other two most common methods of getting oil mist out of the air. Electrostatic Precipitator Mist Collectors An electrostatic precipitator uses ...

Feb. 18, 2013

By ProVent, LLC

Suffer from Allergies or Asthma?

The “ULTRA” washable air filters have an antimicrobial protection that will not allow bacteria, fungi or mold to grow on the filter surface. The antimicrobial protection is not a coating and is not sprayed on. It is a safe and effective antimicrobial agent processed directly into the electrostatic fiber media, rendering it as permanent as the filter itself. The University of ...

Nov. 16, 2010

By ACI Manufacturing

Finding an OEM solution for air purifier & air cleaner

Finding an OEM solution for air purifier & air cleaner, there are many companies out there who are committed to finding the right solution for you and your business. Most of them will develop a solution meeting your needs. Below are examples of solutions you may need to consider if you are seeking for air purifier OEM solutions. In developing new OEM products, your vendor will work with you ...

Feb. 6, 2007

Efficient cyclone systems for fine particle collection in the pharmaceutical industry

The optimized design of gas cyclones is of particular relevance for the recovery of highly valuable products, such as in the production of active pharmaceutical ingredients (API) through drying systems such as Spray or Fluid Bed Drying (Shoyele et al., 2006). . Traditionally, these have been captured with reverse flow gas cyclones, but fine and low density particles remain difficult to capture ...

Jan. 1, 2008

By Advanced Cyclone Systems, S. A.

ReCyclone® EH: ZnO Reactor - ZnO Nanoparticles recovery - Case Study

FOREWORD In 2009, ACS was approached by Innovnano, one important micro and nanoparticles of metal oxides manufacturer in Portugal to increase the yield of one manufacturing facility. Innovnano is a subsidiary of CUF, centenary in the chemical industry. CUF is the largest Portuguese chemical group, with production facilities in Portugal and Spain. ...

Mar. 4, 2014

By Advanced Cyclone Systems, S. A.

Flexible welding fume extraction system in plant

The challenge VAM Drilling (Vallourec Mannesmann Oil & Gas Nederland BV) is located in Heerhugowaard, the Netherlands. This facility has been around for over 40 years. Approximately 20 employees are turning/welding in the plant on a daily basis. Sometimes even 24 hours a day, if projects need to meet certain ...

Aug. 28, 2012

By Plymovent Group BV

Water purification by functionalised self-assembled monolayers on silica particles

This study focuses on a novel method to remove bio molecules and pathogens of different nature, such as proteins, viruses and oocysts, from water by silica particles coated with functionalised self-assembled monolayers. The results clearly show that organic species can efficiently be removed at pH ranges of drinking water by stirring the coated particles in the contaminated water for up to 60 min ...

Jan. 31, 2008

By Inderscience Publishers

Healthy conditions in training centre

The challenge CENFIM’s objective is to educate highly qualified and specialised employees for the metallurgical industry in Portugal. They organise courses of various durations and at various levels. The Portuguese metal industry counts approx. 19,000 companies, employing a total of 190,000 people. In the ...

Aug. 28, 2012

By Plymovent Group BV

Subscribe to our eBulletins

Add Supplier Profile