electrostatic precipitator product Articles

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • Case study - Wet electrostatic precipitators offer cost-effective solution for HZL

    An array of complex air pollution issues places the metallurgical industry among the largest potential sources of pollutants, and one of the most tightly regulated industrial sectors. One fully integrated, nonferrous metal producer in India, however, is demonstrating that a company with a determined commitment to environmental protection, energy efficiency and sustainability can succeed in ...


    By Beltran Technologies, Inc.

  • Innovative wet electrostatic precipitators assure competitive edge in acid marketplace

    The unsteady global economic recovery continues to subject many core industries to persistent volatility in profits, prices, markets and capital investments. However, some analysts remain optimistic about the global international trade in sulfur in all forms, particularly sulfuric acid. This versatile mineral acid is both the world’s most widely used chemical, and the one with the highest ...


    By Beltran Technologies, Inc.

  • CCS vs. Electrostatic Precipitators for Abrasives, Ceramics, Non-Soluble PM2.5, Submicron Particulate

    Manufacturing Processes. Applications where conventional equipment is very inefficient or very expensive to operate and maintain provides an opportunity for the Cloud Chamber Scrubber (CCS) to showcase its unique capabilities. Abrasives manufacturing is a typical example. CCS Cloud Chamber technology was chosen by Saint-Gobain Advanced Ceramics Corp. (formerly Carborundum Corp.) for the ...


    By Tri-Mer Corporation

  • Precipitator Solves Dryer Problem

    Plum Creek Manufacturing, Columbia Falls, Montana, installed a PPC Industries electrostatic precipitator to solve a direct fired dryer dust plugging problem. The electrostatic precipitator was installed in a very congested area and the project had to be done so the dryer was off-line a minimal amount of time. Plum Creek personnel relocated existing equipment, poured concrete footings, ran all of ...

  • The implement of the electro-static and magnetic precipitation technique through the centeral air-conditioning systems

    In this paper we will introduce the electrostatic and magnetic precipitation technique, to deposit the solid dust within the air–conditioning systems .Recently such technique becomes a very important subject for human life and to the college and universities, both the teaching, and researching programs. Viruses can be spread very fast, where the central air-condition systems probably take the ...


  • Controlling Stack Emissions in the Wood Products Industry & Wood Fired Boilers

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Case study - Doe Run Peru – Improving productivity with environmental responsibility

    Doe Run Peru aims to become a preferred global provider of premium metals and services, while at the same time working to operate in a socially and environmentally responsible way. The mining and metals company employs roughly 4,000 people at its operations in Peru’s central Andes. The company has run the La Oroya metallurgical complex since 1997 and the Cobriza mine in the Huancavelica ...


    By Beltran Technologies, Inc.

  • Hurricane for PM Emission Reduction from Dryer off Gases on a Wood Pellet Production Line 8074 m3/h @ 110 ◦C - Case Study

    FOREWORD Advanced Cyclone Systems, S. A. (ACS) designed a settling chamber, followed by a Hurricane system with the double purpose of dust recovery and Particulate Matter (PM) emission reduction, from a sawdust rotary dryer in an industrial wood pellets production plant with 2 ton/h capacity (VIMASOL). High quality pellets are manufactured from sawdust coming from nearby ...

  • Particulate Control Strategies for Incineration

    Abstract This paper discusses various particulate emission control strategies that can be employed for Municipal Solid Waste (MSW), Municipal Sewage Sludge, and Industrial Waste Incineration facilities. An example will be given of a particulate control installation that successfully cleans off-gases from an incinerator at a large photographic products plant. Data supporting a theoretical ...


  • Finding an OEM solution for air purifier & air cleaner

    Finding an OEM solution for air purifier & air cleaner, there are many companies out there who are committed to finding the right solution for you and your business. Most of them will develop a solution meeting your needs. Below are examples of solutions you may need to consider if you are seeking for air purifier OEM solutions. In developing new OEM products, your vendor will work with you ...


  • How do oil mist collectors work? Comparing the different technologies, part II

    In our previous article about oil mist collector technology, we discussed the pros and cons of centrifugal mist collectors and filter-based mist collectors. Today, we look at the other two most common methods of getting oil mist out of the air. Electrostatic Precipitator Mist Collectors An electrostatic precipitator uses ...


    By ProVent, LLC

  • Efficient cyclone systems for fine particle collection in the pharmaceutical industry

    The optimized design of gas cyclones is of particular relevance for the recovery of highly valuable products, such as in the production of active pharmaceutical ingredients (API) through drying systems such as Spray or Fluid Bed Drying (Shoyele et al., 2006). . Traditionally, these have been captured with reverse flow gas cyclones, but fine and low density particles remain difficult to capture ...

  • Case study - Rockwood Pigments chooses Beltran System

    Rockwood Pigments, a global manufacturer of pigment products, has chosen a wet electrostatic precipitator (WESP) system engineered by Beltran Technologies, Inc.. to clean process gas streams before entering a sulfuric acid plant at its Easton, Pa., manufacturing facilities. Rockwood is the world's second laraest manufacturer of iron oxide and other inorganic color pigments used by paint and ...


    By Beltran Technologies, Inc.

  • Possible reuse of Egyptian controlled cement dust

    Possibilities for the reuse of controlled cement dust, collected from the hopper of the electrostatic precipitators installed on the different cement kilns of two of the three biggest companies for Portland cement production located to the south of Cairo, have been investigated. Twenty-one factors representing the physical properties and mineral and chemical composition of the cement dust were ...


    By Inderscience Publishers

  • Case study - AngloGold Ashanti chooses Beltran WESP

    AngloGold Ashanti Brasil Mineracao is a leading producer of gold in the world. AngloGold was working on production plans for the Cuiaba Gold Mining Expansion Project located at Nova Lima, Minas Gerasis. The plant's production capacity is projected to be equivalent to 400 metric tons of sulfuric acid per day. The Promon Company worked on the design, procurement, construction and assembly services ...


    By Beltran Technologies, Inc.

  • Filter technology to meet evolving regulations

    Maguin has developed the Cercat filter for high temperature air pollution control. In this article, David Gambier and Hélène Real outline the technology, as well as installations planned for 2009. Maguin has been present in the waste thermal treatment field since the 1970s. The company’s knowledge has been built through the turnkey supply of thermal treatment units for different kinds of products ...

  • High-Tech Filters

    The current economic situation of the cement industry creates sensitivity regarding off-times and process stability. More stringent air-pollution laws, especially when using waste-derived fuels, are drawing more attention to the off-gas cleaning facilities, usually bag filters. This article does not deal with electrostatic precipitators - as even they have well known disadvantages. By using more ...


    By Evonik Fibres GmbH

  • Case study - WESP technology provides durable solution for Brazil’s top zinc operation

    Forward-thinking metallurgical plant operators around the world constantly seek out more advanced exhaust gas recovery technologies, not only to meet increasingly strict environmental regulations, but also to achieve superior operating performance and to control maintenance and other costs in a competitive marketplace. One fully-integrated polymetal producer headquartered in Brazil has managed to ...


    By Beltran Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you