emission control technology Articles

  • Overview of Emission Control Technologies

    Chapter 8. Emission Control Technology 8.4 Thermal Oxidation 8.4.1 INTRODUCTION The objective of this section is to present various VOC thermal oxidation technologies, their strength and weaknesses and the elements required to determine what is the preferred technology for a given application. In 1970 the environmental authorities started to identify various industries which had ...

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • Bionomic Boiler MACT Emission Control Technologies

    Introduction Bionomic Industries' extensive line of field-proven, cost effective wet and dry scrubber and electrostatic technology choices can easily and economically help you achieve compliance with EPA Boiler MACT regulations for hydrochloric acid, particulate or mercury control. Bionomics' wide range of equipment enables selection of the best control technology to remove a specific or ...


    By Bionomic Industries Inc.

  • Case study - Kiln emission control technologies

    Overview A specialty ceramic material manufacturer in the United States operates several custom-built furnaces in their manufacturing process.  Sometimes referred to as kilns, these high-temperature process devices are generally a major source of air pollutants and require an abatement technology to meet environmental regulations with the state or federal agencies.  As is the ...

  • Life Among The Heavy Metals

    Authors in scientific and applied works interpret the meaning of the concept "heavy metals" in different ways. Today, they include more than 40 chemical elements with an atomic mass of more than 50 atomic units. An important role in the determination of heavy metals is played by the following conditions: their high toxicity in relatively low concentrations, and the ability to bioaccumulation. ...


    By Lumex Instruments Group

  • Experience curves for power plant emission control technologies

    This paper examines past experience in controlling emissions of sulphur dioxide (SO2) and nitrogen oxides (NOx) from coal-fired electric power plants. In particular, we focus on US and worldwide experience with two major environmental control technologies: flue gas desulphurisation (FGD) systems for SO2 control and selective catalytic reduction (SCR) ...


    By Inderscience Publishers

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • Controlling particulate emissions

    Cloud chamber technology uses electrically charged water droplets to attract fine particles and remove them from exhaust streams. At the Saint-Gobain Advanced Ceramics Boron Nitride (formerly Carborundum) plant in Amherst, ...


    By Tri-Mer Corporation

  • Methods for the control of oil vapour emissions

    There are many oil vapours to discharge from oil containers into the atmosphere in oil operations (such as storage and loading). Two basic concepts are discussed regarding the control of oil vapour emission (OVE). The first is to invent active methods to restrain the OVE. The second is to develop passive tail–end remediation technologies to control the released vapour. Oil vapour recovery ...


    By Inderscience Publishers

  • Emission Control Strategies and Technologies for the Chemical Processing Industry: An interview with Chris Anguil

    AC: Could you please provide our readers with a brief introduction to the industries that Anguil Environmental works within? CA: Our thermal and catalytic oxidizer systems are applied on any industrial process that is regulated for Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs) or Nitrogen Oxides (NOX). Some of these industries include chemical ...

  • Put energy into emission control projects

    Many companies feel pressured to spend the least amount possible to meet environmental regulations, primarily because compliance isn’t a profit generating endeavor. What some environmental and compliance managers fail to realize is that emission control equipment can quickly become a profit decreasing endeavor with this penny wise-pound foolish approach. With mandatory greenhouse gas (GHG) ...

  • Case study - Fiberglass polymer emissions: RTO control technology

    OVERVIEW A producer and supplier of corrosion resistant piping systems was looking to improve the reliability and lower operating expenses of an existing air pollution control system at their facility. During their manufacturing process, centrifugally cast mortar pipe systems are reinforced with a fiberglass polymer. This makes the pipe ideally suited for most corrosive piping ...

  • Carbon Fiber Emission Control Strategies

    Problem Carbon fiber (fibre) and graphite reinforced polymers are materials that have, and will continue to revolutionize the products we use everyday by making them stronger, lighter and more durable. However, the manufacturing process can have serious environmental ramifications and immediate danger to human health if careful consideration is not given to emission control at the ...

  • Panelboard emission control: An historical perspective

    Sometimes the best view of the future can be seen from the past. That's why we've written this paper. We believe that an understanding of the history of emission controls in the panelboard industry will help everyone understand how this industry got to where it is and what the future holds. This account focuses on the evolution of technology devoted to the control of air pollution emissions from ...


    By Lundberg, LLC

  • Strategies for controlling pollution from vehicular emissions in Beijing

    Beijing is one of the most polluted cities in the world, which is caused by surprising vehicular growth in the past decade. This paper describes the severe situation of vehicular emission pollution in Beijing, and discusses the following strategies for mitigation: improving fuel quality, controlling the exhaust from new vehicles, controlling the emissions from vehicles in use through, e.g., ...


    By Inderscience Publishers

  • Reducing Emissions Through Gas to Liquids Technology

    Gas to Liquids is a term that we are starting to hear more often, but what does it mean? Global Emissions Management looks at the need for new sources of transportation fuel, investigates current and planned activity in this key new technology area, and examines its impact on ...

  • Controlling Pharmaceutical Coating & Drying Process Emissions

    Capturing and destroying harmful emissions from pharmaceutical processes can be challenging. It’s not because the volatile organic compounds (VOCs) are difficult to destroy using catalytic or thermal techniques. It’s because their concentrations can be so high. These process streams raise safety concerns, both when they’re collected in vents and when they reach the final ...

  • Potential of biofiltration for VOCs emission control and safety aspects

    Directive 99/13/EC on the emission of Volatile Organic Compounds (VOCs) is impacting on several industries in Italy, as well in other EU countries. Many small enterprises have to invest in new control systems and need to be helped to choose an appropriate and safe technology. As VOCs are highly flammable compounds, high concentrations in emission flows can pose a fire and explosion hazard if ...


    By Inderscience Publishers

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Trace elements - controlling emissions from coal combustion

    International and national legislation is increasingly being applied to trace element emissions. Although emissions have decreased for a variety of reasons in many developed countries, continued use of coal and more successful control strategies in other sectors mean that coal combustion is still a relatively important source of some trace elements, especially mercury. Existing pollution control ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you