emissions analyzer calibrator Articles

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • New White Paper on FTIR multigas analysis

    Quantitech has announced the publication of a free White Paper on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR (Fourier Transform InfraRed) technology. With the ability to measure almost any gas, FTIR monitoring technology is employed in an enormous variety of applications including Continuous Emissions Monitoring, Stack Testing, Process Control, ...


    By Quantitech Ltd

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • FTIR becomes best option for multi-gas emissions

    Globally, the number of industrial processes and emissions being monitored with Gasmet’s FTIR multi-gas technology has increased enormously in recent years as process managers exploit the benefits of being able to monitor a wide range of gases simultaneously and with minimal maintenance and calibration requirements. Gasmet CEMS (continuous emissions monitoring systems) are used for ...


    By Gasmet Technologies Oy

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Analyzing sulfur in soil and sediment with handheld XRF

    Background Sulfur creates more than nasty odors. Exposure to low levels (0-10ppm) of hydrogen sulfide (H2S) causes irritation of eyes, nose, and throat; higher levels can cause headaches, dizziness, nausea and vomiting, coughing, and breathing difficulty. H2S and numerous other odor-causing compounds are generated as a result of organic material decomposition. In the case of the Muddy River in ...

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Hydrogen Sulfide Continuous Emission Monitoring of Odor Control Systems

    ABSTRACT This paper discusses the use of the Sycamore Continuous Emissions Monitor (CEM) for monitoring Hydrogen Sulfide Gas concentrations within odor control systems. The CEM is configurable as a single, two or three point system and can measure from 5 ppb to 2 PPM, 0.1 – 20 PPM, and 0 – 200 PPM and is designed for monitoring of scrubbers, carbon adsorbers, biofilters and biotrickling ...

  • On the suitability of Portable X-Ray Fluorescence Analyzers for rapid screening of toxic

    Abstract X-Ray Fluorescence spectrometry (XRF) has been routinely used for alloy testing, determination of Pb in paint, and determination of Cd in plastic. However, its use to screen for toxic elements in food and medicinal products has been surprisingly limited to date. While XRF is less sensitive than atomic spectrometry methods such as ICP-AES and ICP-MS, it offers a number of significant ...


    By Northern ANI Solutions Ltd.

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Portable IR Analyzer Provides ASTM Field Test Method for Measuring Soot Levels In Diesel Engine Lubricating Oils

    The InfraCal Soot Meter, from Wilks Enterprise, gives users an approved ASTM testing method for measuring the percent level of soot in diesel engine lubricating oils -- ASTM Method D7686-2011 entitled “Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) instrument.” While there is widespread disagreement on used-diesel ...


    By Spectro Scientific

  • Metals Determination in Biodiesel (B100) by ICP-OES with Microwave Assisted Acid Digestion

    Elemental composition of biodiesel is required for product quality control, auto-engine life, emissions control, and researching appropriate additives. We studied the use of microwave assisted acid digestion reaction system to prepare neat biodiesel (B100) samples in an aqueous medium for ICP-OES analyses. Biodiesel produced by a transesterification reaction was subjected to the test method for ...


  • Cost Containment: Beyond the Obvious

    Utilities today can implement a number of different initiatives to help them contain costs and maximize profits. Some of those, such as switching to a more efficient fuel source if possible, can produce obvious results that are relatively easy to calculate. But there are other initiatives, though less obvious, that can produce significant results at the bottom line. One such cost-containment ...

  • Aswan High Dam Reservoir management system

    The Aswan High Dam Reservoir management system was developed to simulate dam operation under varying boundary conditions taking as example climate change and Millennium Dam construction, and analyze the optimal operation rules of the reservoir taking into account a large number of objectives, including hydropower production and water supply for irrigation purposes. The developed system runs on ...


    By IWA Publishing

  • Facilitating compliance with consent decree requirements using an EMIS

    In late 2008, T3, a division of Trinity Consultants, developed an environmental management information system (EMIS) to manage “near real-time” emissions data at a petroleum refinery. The system is designed to support Consent Decree requirements for compliance demonstrations with air quality regulations at the facility. Functionality delivered includes advanced data gathering, ...


    By Trinity Consultants

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...


    By Pollution Srl

  • CDM monitoring & reporting for carbon credits case study

    Abridged from a Wastecon 2008 Presentation and Paper by Mitchal L. Cassel LANDTEC, Colton, California The project sites The project is in Brazil and obtains certified emission reductions (CER) or carbon credits for a large scale, waste handling and disposal, clean development mechanism (CDM) project. Methane emissions are being reduced through collection and destruction of ...


    By Geotech

  • So Your Greenhouse Gas (GHG) Monitoring Plan is Complete... Now What?!?

    U.S. EPA's Greenhouse Gas Mandatory Reporting Rule (GHG MRR) codified at 40 CFR Part 98 required that facilities subject to the rule have a complete written GHG Monitoring Plan by April 1, 2010. At a minimum, the GHG Monitoring Plan must identify (1) methods used to collect GHG emissions information and supporting data, (2) personnel responsible for collecting the data, and (3) quality assurance, ...


    By All4 Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you