engine emissions monitoring Articles

  • Learn How to Implement a More Effective Emissions Monitoring Strategy with Our Application Note, “The Art of Emissions Monitoring and Sampling: Maintaining Gas Integrity”

    Over the past 15 years, all of us here at E Instruments have used our expertise to design, manufacture, and distribute quality emissions monitoring equipment, air quality monitors, and many other products to clients all over the world. Aside from creating many high-quality and reliable instrumentation solutions, something else we've always ...

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • NIOSH Announces Sampling Strategy to Help Identify Potential Nanomaterial Exposure in an Occupational Setting

    On November 1, 2016, the National Institute for Occupational Safety and Health (NIOSH) published a blog item entitled “Never fear!  NEAT 2.0 is here! — How to perform nanomaterial exposure assessment in the workplace.”  NIOSH notes that in 2009, it developed and was the first to recommend using the nanoparticle ...


    By Bergeson & Campbell, P.C.

  • Emissions Test Report - Gas Compressor Engines

    INTRODUCTION In 2004, Northeast Texas Air Care (NETAC) commissioned a pilot project to demonstrate the effectiveness of available ...


    By DCL International Inc.

  • In-situ continuous emissions monitoring & regulatory compliance

    As environmental scrutiny has risen and regulation has tightened in recent years, the importance of having accurate information on the environmental performance of your power plant has increased. After all, if you want to manage something, you need to be able to measure it. The analogy is obvious; you wouldn't start a diet without first investing in a set of scales. So it is with Continuous ...

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Vibration monitoring and analysis in aircraft engine test cells

    Snecma, part of the SAFRAN group, is dedicated to the production of engines for both air and space. Working alone or in partnership, Snecma designs, develops and produces engines for civil and military aircraft, launch vehicles and satellites. The company is organised in three divisions: Commercial Engines – Snecma and GE Transportation team up to produce the bestselling family of CFM56 ...

  • Monitoring CO2 emissions from passenger cars and vans in 2013

    The European Environment Agency (EEA) supports the European Commission in the monitoring of the CO2 performance of passenger cars, in accordance with Regulation (EC) 443/2009, and of light commercial vehicles in accordance with Regulation (EC) No 510/2011. The regulation for passenger cars sets a CO2 'specific emission' (1) target of 130 g CO2/km by 2015 whilst the regulation for light commercial ...

  • A constant eye on emissions

    Due to increasingly rigorous requirements for regulatory and permit compliance, organisations are seeking more from all compliance support systems. The ability to expand systems to encompass new, or migrate existing, regulatory calculations used to monitor environmental performance is vital. Planning strategically for a scalable and sustainable system has been shown to reduce overall compliance ...


    By Wood Group Mustang, Inc.

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • Becoming a Zero Emissions Brewery

    Diverting 600 tons annually from landfills turn hops, grains, pallets, cardboard, glass, office paper and shrink wrap into major savings — and great beer! ALMOST AS FAMOUS for reducing its waste as for making great beer, Mad River Brewing Company of Blue Lake, California is renowned for its Steelhead and Jamaica ales as well as its ten Waste Reduction Awareness Program (WRAP) awards ...


    By BioCycle Magazine

  • Reducing Odor and VOC Emissions

    The Montgomery County Regional Composting Facility (MCRCF) in Silver Spring, Maryland is designed to process 400 wet tons/day of lime amended biosolids from the Blue Plains Wastewater Treatment Plant (WWTP) in Washington, D.C. Recently, political pressures forced operations to cease at the MCRCF. Although the aerated static pile composting plant’s fate has not been completely decided, its owner, ...


    By BioCycle Magazine

  • A new approach to SSM emissions management

    On October 16, 2009, the United States Court of Appeals for the District of Columbia Circuit (DC Circuit) mandated the vacatur of the “Startup, Shutdown, and Malfunction (SSM) exemption” allowed under General Provisions in Subpart A of the National Emission Standards for Hazardous Air Pollutants (NESHAP).1  Under the SSM exemption, NESHAP Subpart A previously stipulated that an ...


    By Trinity Consultants

  • Minimizing Refrigerant Emissions in HVAC Systems

    Managing the operation and maintenance of a facility's air conditioning equipment has always been a major responsibility, as chillers often represent the single largest electrical load in a facility. Since the annual cost of operating chillers is a major ...


    By IHS

  • Warehouse Optimization: Balancing Equipment Performance and Worker Safety Through Emissions Measurements and Air Quality Monitoring

    Successful warehouse functionality is dependent on both maximizing equipment performance and providing a safe and healthy environment for workers that encourages productivity. However, these two factors are often at odds with each other as warehouse equipment such as forklifts, burnishers and delivery trucks emit toxic gases that can have the potential to create poor indoor air quality which ...

  • Monitoring CO2 emissions from new passenger cars in the EU: summary of data for 2012

    For the third successive year, the European Environment Agency (EEA) has collected EU Member States' data on passenger car registrations, in accordance with Regulation (EC) No 443/2009. All Member States reported information on Carbon dioxide (CO2) emissions and the mass of cars, together with other vehicle characteristics. This data was used to evaluate the performance in 2012 of the new vehicle ...

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • RSD technology for MBTA bus fleet emissions

    Exhaust emissions from transit buses have long been a concern for air quality officials. Agencies have been investing millions of dollars in advanced and clean fuel technologies to reduce emissions from their bus fleets. Generally, the only information available about the emission characteristics of these vehicles comes from expensive engine- and chassis-dynomometer tests. Relatively little is ...

  • Low emissions from large plants too

    Type     HOFGAS®- LPM 3000 Performance     3’000 Nm³/h, 15’000 kW Location     Scotland (GB) SituationEvery year, 150’000 tonnes of waste from Edinburgh, Lothian and the Borders Region are brought to the Dunbar landfill site. The waste is transported by rail to the site. In 2002, the UK Environmental Agency ...


    By Hofstetter BV

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you