engine emissions test Articles

  • Engine Testing

    Engine testing involves measurement of rotating speed and torque of the engine by applying load controlled by a dynamometer connected to its output shaft. HORIBA has developed various types of dynamometer for the purpose of engine testing. They are mainly classified into two types; one is absorbing only dynamometer such as hydraulic dynamometers and eddy-current dynamometers, the other is ...


    By HORIBA Europe GmbH

  • Emissions Test Report - Gas Compressor Engines

    INTRODUCTION In 2004, Northeast Texas Air Care (NETAC) commissioned a pilot project to demonstrate the effectiveness of available ...


    By DCL International Inc.

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Emission Testing of Engines to be Installed in Non-Road Mobile Machinery

    The European Commission has founded a project on emission testing – 'Emission Testing of Engines to be installed in Non-Road Mobile Machinery'. The project was undertaken by Abgasprüfstelle Berlin-Adlershof GmbH in Germany. The work is a part of emission inventory of spark-ignition engines to be used as a basis for a future amendment of the Directive 97/68/EC. The inventory covers seven different ...

  • Engine emissions analyzer further improves Intertek’s emissions testing capability - Case study

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions. ...


    By Gasmet Technologies Oy

  • NO x emission model of turbofan engine

    During last decade a lot of investigations also focused on the evaluation of aircraft engine impact on local and regional air quality in the vicinity of the airport. The emission inventory of aircraft engines are usually calculated on the basis of certificated emission indexes, which is provided by the engine manufacturer and reported in the database of ICAO. The certificated emission indices ...


    By Inderscience Publishers

  • Siemens analyzers provide the accuracy needed for critical engine emissions testing – Case Study

    Challenge A company in the Western USA provides industrial gas turbines for both on- and offshore electrical power generation. The company offers low-emissions products and was looking for an analyzer to use in their continuous emissions monitoring (CEM) system that could accurately and continuously monitor and verify the CO emissions from their turbine’s gas engines. ...

  • Experimental method for marine engine’s emissions analysis

    Abstract The world is considering various solutions to reduce exhaust emissions, the use of alternative fuels and the development of more efficient marine engines. IMO the company gave guidance for future borders of individual exhaust components, taking into account a variety of applications and conditions for the operation of marine engines. Engine ...


    By ECO PHYSICS AG

  • Delivering an Award-Winning Engine Test Facility

    Across Sierra’s two divisions, Flow Measurement and Automotive Test, striving for the ultimate in accurate and repeatable measurement and control is the name of the game.  We have focused a lot on trying to publish useful and informative Flow Measurement and Control blogs. After all, that makes sense as the ...


    By Sierra Instruments, Inc.

  • Partial Flow Sampling System For Transient Engine Testing

    For on-highway engine manufacturers, meeting model year 2007 emissions levels represents a major measurement challenge. However, future off-road engine emissions testing requirements are anticipated to include not only lower steady-state emissions levels, but also the possibility of using transient cycle data. As a result, engine manufacturers are seeking more cost-effective methods of ...


    By Sierra Instruments, Inc.

  • Case study - Engine test cell exhaust: RTO

    Overview A Mid-western outboard engine manufacturer bought a three year-old plant for the production of its marine engines. When finished, the engines are removed from the assembly line and run for quality control. The 25,000 SCFM of exhaust from testing contains volatile organic compounds (VOCs) that require regulatory compliance. Also within this exhaust is a great deal ...

  • Catalytic Exhaust Emission Control of Small Internal Combustion Engines

    ABSTRACT Gaseous emissions present in the engine exhaust of on-road motor vehicles are subject to stringent exhaust emission 2ontrol standards for carbon monoxide (CO), hydrocarbons, and ...


    By DCL International Inc.

  • Vibration monitoring and analysis in aircraft engine test cells

    Snecma, part of the SAFRAN group, is dedicated to the production of engines for both air and space. Working alone or in partnership, Snecma designs, develops and produces engines for civil and military aircraft, launch vehicles and satellites. The company is organised in three divisions: Commercial Engines – Snecma and GE Transportation team up to produce the bestselling family of CFM56 ...

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

  • Retrofitting diesel engines: reducing the emissions of our ideal power source

    Over the past several years, Avogadro Environmental has been working with a number of clients to develop proactive environmental programs as part of their EPA Performance Track and ISO 14001 management systems.  Many client companies that are proactively implementing measures to reduce their environmental footprint are looking for ideas.  Diesel engine retrofits for off-road stationary and mobile ...

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • The emission characteristics of a compression ignition engine operating on castor oil methyl ester

    Diesel vehicles are a major form of transportation, especially in developing countries. Recent concerns over the environment, increasing fuel prices and the scarcity of its supply have promoted interest in the development of alternative sources of petroleum fuels. In this investigation, castor oil methyl ester was prepared by transesterification using potassium hydroxide (KOH) as a catalyst and ...


    By Inderscience Publishers

  • Characterising emissions from private passenger vehicles using engine operating patterns

    A method to simulate emissions factors using frequency distribution plots of engine speed and engine load is proposed. The distribution plots and corresponding emissions factors were developed from speed time series’ of real-world driving cycles and physical properties of a range of private passenger vehicles tested at the EMPA. Emissions factors were estimated for a set of simultaneously ...


    By Inderscience Publishers

  • Forklift Emissions Analyzers

    Forklifts are commonly used in warehouses of various size and capacity for the movement and shipping of goods; however, the unoptimized engines can produce excess quantities of silent and deadly CO gas that can risk the health and safety of the workers. When forklifts are brought in for service usually the CO gas isn't measured. If the CO gas isn't measured and the engine properly optimized then ...

  • Characterising emissions from private passenger vehicles using engine operating patterns

    A method to simulate emissions factors using frequency distribution plots of engine speed and engine load is proposed. The distribution plots and corresponding emissions factors were developed from speed time series' of real-world driving cycles and physical properties of a range of private passenger vehicles tested at the EMPA. Emissions factors were estimated for a set of simultaneously ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you