engine exhaust measurement equipment Articles

  • Catalytic Exhaust Emission Control of Small Internal Combustion Engines

    ABSTRACT Gaseous emissions present in the engine exhaust of on-road motor vehicles are subject to stringent exhaust emission 2ontrol standards for carbon monoxide (CO), hydrocarbons, and ...


    By DCL International Inc.

  • Warehouse Optimization: Balancing Equipment Performance and Worker Safety Through Emissions Measurements and Air Quality Monitoring

    Successful warehouse functionality is dependent on both maximizing equipment performance and providing a safe and healthy environment for workers that encourages productivity. However, these two factors are often at odds with each other as warehouse equipment such as forklifts, burnishers and delivery trucks emit toxic gases that can have the potential to create poor indoor air quality which ...

  • Equipment purchasing and leasing

    PURCHASING (or leasing) equipment for use in manufacturing compost (and/or soil products) can be one of the riskiest decisions compost managers must make. The obvious risks of equipment acquisition (i.e. paying too much, higher than expected operating costs, not having the cash flow to cover payments, etc.) are augmented by risks such as machines not able to keep up with the increased materials ...


    By BioCycle Magazine

  • Portable IR Analyzer Provides ASTM Field Test Method for Measuring Soot Levels In Diesel Engine Lubricating Oils

    The InfraCal Soot Meter, from Wilks Enterprise, gives users an approved ASTM testing method for measuring the percent level of soot in diesel engine lubricating oils -- ASTM Method D7686-2011 entitled “Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) instrument.” While there is widespread disagreement on used-diesel ...


    By Spectro Scientific

  • Total Exhaust Biosafety Cabinet Upgrade at Research Facility Provides Significant Energy Savings

    When Harvard’s Biology Research Infrastructure (BRI) facility opened in 2006, they required four biological safety cabinets to provide primary containment during animal procedures. In the selection process, workspace containment and isolation requirements, operation modes for non-use periods and maintenance, building integration, and the energy burden to the building system were all ...


    By The Baker Company

  • Distributed Measurements Unlock the Future of Design

    The next generations of materials and design will require sensing technologies that can monitor beyond the scope of point sensors such as thermocouples and strain gauges. New sensing platforms based on optical fibers can obtain spatially continuous, real time data, giving developers detailed insight across broad areas into how their materials and designs behave. Such systems also can sense ...


    By Sensuron

  • ESTECH Corporation - engineering solutions and technology

    20 Years of Success and a New Facility On 1 September 2009, ESTECH Corporation (in Japanese, Kabushiki Kaisha ESTECH) Engineering Solutions & Technologies opened the doors of its new testing facility, and at the same time celebrated 20 years since its inception in 1989. Situated less than 20 km from Yokohama and 40 km from the centre of Tokyo, the two storey, 670m2 test facility ...

  • Retrofitting diesel engines: reducing the emissions of our ideal power source

    Over the past several years, Avogadro Environmental has been working with a number of clients to develop proactive environmental programs as part of their EPA Performance Track and ISO 14001 management systems.  Many client companies that are proactively implementing measures to reduce their environmental footprint are looking for ideas.  Diesel engine retrofits for off-road stationary and mobile ...

  • Soot level – a diesel engine lube oil condemning limit

    While there is widespread disagreement on used-diesel oil condemning limits, it is well known that excessive soot in the lube oil causes abnormal valve and injection-train wear.  It can also increase exhaust emissions and clog filters.  Typically, the suggested limit for soot is in the neighborhood of 3% but can go much higher.  With the new ASTM Method D7686, truck, bus, ...


    By Spectro Scientific

  • Emission Testing of Engines to be Installed in Non-Road Mobile Machinery

    The European Commission has founded a project on emission testing – 'Emission Testing of Engines to be installed in Non-Road Mobile Machinery'. The project was undertaken by Abgasprüfstelle Berlin-Adlershof GmbH in Germany. The work is a part of emission inventory of spark-ignition engines to be used as a basis for a future amendment of the Directive 97/68/EC. The inventory covers seven different ...

  • Can a gas engine use diesel fuel with less pollution?

    Anyone concerned with rising oil prices and pollution from fossil fuel might like to know about a new technology, which addresses both problems. Its application will put an end to the days of sooty smoke seen from accelerating diesel trucks and buses. The ...


  • Effects of a zeolite SCR system on comprehensive emissions from a heavy-duty diesel engine

    The effects of a zeolite urea-selective catalytic reduction (SCR) aftertreatment system on a comprehensive spectrum of chemical species from diesel engine emissions were investigated in this study. Representative samples were collected with a newly developed source dilution sampling system after an aging process designed to simulate atmospheric dilution and cooling conditions. Samples were ...

  • Comparing TGA, FTIR and fixed filter infrared analyzers for measuring soot levels in in-service lubricants

    Measuring soot in diesel engine oil has become more important as soot levels get higher due to exhaust gas recirculation. As soot isone of the key indicators for the condition of the oil, diesel engine maintenance programs performing regular soot checks can realize cost savings by extending drain periods and reducing used oil disposal. TGA (Thermal Gravimetric Analysis) is the traditional method ...


    By Spectro Scientific

  • NASA acts to reduce crawler transporter noise

    The United Space Alliance sought outsideassistance to evaluate and develop noise controlmeasures for NASA’s two CTs at KSC aspart of a modernisation and upgrading program.NASA selected Noise Solutions Inc. (ageneral acoustical contractor) and their subcontractorFaszer Farquharson & Associates ofCalgary, Canada to engage in this project. Thefirst phase of the sound study ...

  • Breakthroughs in testing technology as new global player emerges

    Engineers and developers now have a choice of engine testing technologies following the recognition by the United States Federal Register of the BG3 Partial Flow Dilution sampling (PFD) technology developed by Sierra Instruments for engine particulate emissions, R&D and certification. Building on this news, the Monterey, California - based company has also extended its global footprint this ...


    By Sierra Instruments, Inc.

  • Modeling Analysis of Fuel Sprays

    Current engine development processes in which computations play an important role have sought for numerical models which can accurately represent phenomena in spray combustion. The authors have developed original sub-models taking into account the effects of extensive spray combustion phenomena including nozzle cavitation, droplet breakup behavior, multi-component evaporation process, spray-wall ...


    By HORIBA Europe GmbH

  • HORIBA Mechatronics Product Lines

    HORIBA has several decades of experience in providing solutions for automotive test systems. We have focused on testing components of the vehicle powertrain including the engine, transmission, clutch, torque converter, axles or brakes up to the complete vehicle. In all cases the missing parts of the vehicle and its environment is replaced by a system able to reproduce the load the specimen would ...


    By HORIBA Europe GmbH

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Solutions for Automotive Testing

    In recent years, the field of research, development and testing of vehicles has created a need for integrated testing systems which cover the entire vehicle including engine and driveline. These systems also need to be capable of being deployed globally in a supportive structure. As a means of responding to these market requirements, building on our strengths in vehicle emissions measurement ...


    By HORIBA Europe GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you