environmental analyzer Articles

  • What`s Hiding in Your Waste Piles?

    In over 25 years in the grinding and recycling industry, we’ve learned that there’s always more than meets the eye in a pile of waste materials. Whether it’s a pile of pallets or household garbage, there’s some good and some bad hiding under the surface. It's there if you know how to find it. You can find it with the right industry knowledge, the right equipment, ...


    By Rotochopper, Inc.

  • Life Among The Heavy Metals

    Authors in scientific and applied works interpret the meaning of the concept "heavy metals" in different ways. Today, they include more than 40 chemical elements with an atomic mass of more than 50 atomic units. An important role in the determination of heavy metals is played by the following conditions: their high toxicity in relatively low concentrations, and the ability to bioaccumulation. ...


    By Lumex Instruments Group

  • Corporate sustainability: A guide to measuring and improving energy efficiencies

    As environmental scrutiny of global industries continues to grow, governments are seeking to impose energy efficiency targets on companies in order to comply with new directives. One solution is to encourage energy suppliers to become energy service companies, who work with customers to identify potential savings and share the benefits this delivers. For the global food processing industry, this ...


    By TOMRA Sorting GmbH.

  • Research NOx Analyzers

    ECO PHYSICS provides environmental experts with exceptionally sensitive and precise NOx measurement instruments. Please take a look at our newest press release on our research NOx analyzers below. Bound by the same laws of nature, ecology and physics are close associates in an on-going battle to preserve air quality around the globe. One of our planet's champions is Swiss-based ECO PHYSICS. The ...


    By ECO PHYSICS INC.

  • Forklift Emissions Analyzers

    Forklifts are commonly used in warehouses of various size and capacity for the movement and shipping of goods; however, the unoptimized engines can produce excess quantities of silent and deadly CO gas that can risk the health and safety of the workers. When forklifts are brought in for service usually the CO gas isn't measured. If the CO gas isn't measured and the engine properly optimized then ...

  • Analyzing for Trace CO and CO2 using a Total Hydrocarbon Analyzer

    Untitled Document The purity of Specialty Gases is determined by the measurement of various contaminants including Total Hydrocarbons. Low level measurements of carbon ...


    By MOCON, Inc. - Baseline

  • ANALYZES OF THE USED FRIED OIL UNDER ENVIRONMENTAL PERSPECTIVE AND ITS POSSIBILITIES FOR PRODUCTION OF BIODIESEL

    At the moment, questions concerning the environment degradation and the sustainable development are highly argued, but Brazilian companies' efforts for the reduction and elimination of inconsequential effects caused by its products are still presented in incipient numbers. Amongst the products that can generate negative effects to environment and are generated daily and in large amount, it can be ...


  • Introduction to Environmental Testing in the USA

    Environmental laboratories practice “applied analytical chemistry” by analyzing samples using a list of potential contaminants to determine how much, if any, of the contaminant is present. These contaminants, the methods used to analyze for them, and the maximum amount of contaminant allowed in the sample are defined by regulation. This paper provides an overview of ...

  • Portable lead analyzer to locate source of lead

    OBJECTIVE: To investigate the sources of lead in the environment in children with elevated blood, with the help of a Field Portable X-Ray ...

  • Reducing the Detection Limits for a Process Moisture Analyzer

    KEYWORDS Moisture Analyzer, Piezoelectric Sensor, Smart Transmitter, Internal Verification, Quartz-Crystal Microbalance ABSTRACT Piezoelectric moisture analyzers have been used in the process industry for over two decades. While this is an older technology for measuring moisture in gas phase samples, it is still one of the most reliable in ...

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Air Dispersion Models - Models can be used to aid in demonstrating environmental compliance, analyzing process changes and evaluating the impacts of accidental releases

    Air dispersion models are used to estimate the downwind concentration of pollutants emitted by various pollution sources such as industrial facilities and regional public traffic. Dispersion models play an important role in the industrial and regulatory communities. They are typically used to demonstrate compliance with National Ambient Air Quality Standards as part of new source review, ...


    By Trinity Consultants

  • Wireless Sensors for Environmental Compliance

    Untitled Document When no wires are required for power or signal transmission, monitoring devices not only become less costly to own and operate, but they can also be installed ...


  • What is Environmental Restoration?

    The U.S. Department of Energy's (DOE's) Environmental Restoration Program directs the assessment and cleanup of inactive sites and surplus facilities contaminated from previous defense and non-defense-related programs. All cleanup activities must comply with federal, state, Indian Nation, and local laws and regulations. In completing environmental restoration activities, DOE is committed to ...

  • NextGen GIS and the Environmental Database

    Next Generation (NextGen) Geospatial Information System (GIS) and U.S. Department of Energy (DOE) Cold War legacy sites environmental records—spanning nearly 40 years—in the Environmental Database, are managed by the DOE Office of Legacy Management (LM). As key LM assets, these records must be managed and maintained efficiently and effectively. There are over 16 different applications ...


    By EarthSoft, Inc

  • Environmental technology verification report

    The U.S. Environmental Protection Agency (EPA) supports the Environmental Technology Verification (ETV) Program to facilitate the deployment of innovative environmental technologies through performance verification and dissemination of information. The goal of the ETV Program is to further environmental protection by accelerating the acceptance and use of improved and cost-effective technologies. ...


  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Sonic booms – environmentally friendly?

    JAXA and Brüel & Kjær Join Forces to Measure Sonic Booms Brüel & Kjær and JAXA join forces in a research project to measure sonic booms. Side-by-side with JAXA’s ABBA sonic boom system, Brüel & Kjær’s PULSE LAN-XI based data acquisition and analysis system is used to study the effects of sonic booms on buildings. When ...

  • Measuring corporate environmental footprint

    Nuno DaSilva, Managing Director of PE Americas, reveals the best methodologies for measuring an organization’s environmental impact. Frequently I get asked for guidance on the best methods for measuring an organization's environmental footprint. Questions tend to be about 'should measurement be based strictly on collecting emissions and energy use data from operational and facility sites?' How ...


    By thinkstep

  • Beliefs, Politics, and Environmental Policy

    Introduction Many of us who work on environmental issues have faced the challenge of conveying their importance to nonspecialists. Perhaps we have found ourselves defending the robustness of climate science to a contrarian uncle, or extolling the importance of biodiversity to a dubious aunt. Our relations and friends are often educated people, skilled in their own professions, who have ...


    By Oxford Journals

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you