environmental enclosure Articles

  • Mining Emissions Effectively Monitored with Micro Pulse LiDAR Technology

    Mining operations include blasting, excavating, scraping, and sifting large amounts of dirt. These activities create dust and other emissions that are transported by air currents to surrounding areas. It is easy to say that dangerous particulate matter (PM) generated by mining should be monitored and kept to a minimum; however, it is very challenging to measure the levels of contaminants in the ...

  • Diesel Particulate Filter for Caterpillar Wheel Loader

    Description A soil remediation project in Colorado, USA, by Shaw Environmental, required enclosure of the work area while handling the contaminated soil with a Caterpillar 966G Wheel Loader. Challenge The operation of diesel powered heavy equipment for handling of soil within the enclosed area resulted in a high concentration of diesel soot in the air, diesel odor, and reduced ...


    By DCL International Inc.

  • Canarina CUSTIC software · impact analysis of noise · algorithms 7

       References Environmental Protection Department (2000) Housing Design to Abate Traffic Noise in Hong Kong, Environmental Protection Department, Hong Kong. Environmental Protection Department (2001) Screening Structures and Building Designs against Transportation Noise in Hong Kong, Environmental ...

  • TIGG Activated Carbon Box Adsorbers Contain VOCs at MGP Site

    Tasked with the excavation, removal and solidification of soil containing coal-tar by-products generated by a former manufactured gas plant in New York, an experienced environmental remediation firm decided to use a method that proved successful in previous projects. TIGG activated carbon box adsorbers were used to contain VOCs at the former MGP site undergoing environmental remediation. By ...


    By TIGG, LLC

  • NASA orbiter protection enclosure case study

    In the early stages of the space shuttle program, NASA engineers determined that it was critical to have a facility ready to house the space shuttle in the event of an emergency landing. In 1982, NASA issued a worldwide tender for a company to design and engineer a structure that could be flown to any one of two hundred predetermined sites around the world. The structure had to be designed ...

  • Case study: custom precision mechanics components manufacturing

    Ojala Group’s (owned by Flextronics) mission is to build, maintain and develop mutually beneficial long-term partnerships with customers within the telecommunications, electrical and electronics industries as well as the automation and control industries. Ojala Group is committed to constantly satisfying its customers' changing needs thereby adding value to the customers. Ojala Group ...


    By Watman Ltd.

  • Effective control of fugitive emissions

    Are you Building a brand new process and want to get through the permit process quickly? Looking for ways to further reduce emissions? Under an order from U.S. Environmental Protection Agency (EPA) to further reduce emissions? With EPA continually pressuring industry to reduce emissions, control of fugitives is increasingly important to your overall emissions ...

  • VOC control efficiency compliance test case study

    Skyworks Solutions, Inc. (Skyworks) selected CK to perform a compliance emissions testing program to determine the control efficiency of a new Roto-Concentrator followed by a thermal oxidizer (RC/TOx) used to control volatile organic compounds/hazardous air pollutants (VOC/HAP) from multiple manufacturing processes. A facility air permit condition required compliance testing of the subject RC/TOx ...


    By CK Environmental, Inc.

  • Rotork’s RHS solves valve access issue at water treatment plant

    Recent rehabilitation at the drinking Water Treatment Plant #2 in Olathe, Kansas, USA, has included the installation of Rotork IQ3 intelligent electric valve actuators to replace electric actuators from another manufacturer. In the gravity filter plant, 18 butterfly valves are situated in an area beneath a walkway which made it difficult to access and operate the old actuators. With the new ...


    By Rotork plc

  • Continuous Oxygen Monitor Detects Leaks in Nitrogen Dewar Storage

    Extremely low maintenance oxygen (O2) monitor designed to continuously monitor confined spaces for low oxygen levels available from PureAire Oxygen Monitors. PureAire Oxygen Monitor is suitable in all environments containing nitrogen, helium, argon, or any cryogenic gases. PureAire is unaffected by temperature, humidity, barometric pressure, or any environmental changes. The instrument displays ...

  • Grounding equipment can prevent costly repairs

    Every remote environmental monitoring station should include a plan for an Earth Ground. All sensors, loggers and telemetry devices should be bonded, or connected, to the Earth Ground in order to protect instrument circuitry from damage due to changes in electric potential. Electric potential is defined as the difference in electrical energy between two points and is typically measured in volts ...

  • Human Error Threatens Safety in Hazardous Areas

    The top 5 problems identified in hazardous areas are Poor or no maintenance on flameproof (Ex d) enclosures. Due to corrosion—especially when equipment is installed outdoors—the Ex d protection is gone 2-3 years after installation. Incorrectly installed Ex d cable glands. Even if the combination of cable and gland is chosen correctly, the instructions on how to ...


    By Mettler - Toledo Int. Inc

  • Probing the debromination of the flame retardant decabromodiphenyl ether in sediments of a boreal lake

    After decades of using polybrominated diphenyl ethers (PBDEs) as flame retardants, a large reservoir of these toxins has accumulated in ecosystems worldwide. This study used an innovative approach to examine whether the fully brominated PBDE, decabromodiphenyl ether (decaBDE), degrades to more toxic congeners in aquatic environments. We incubated intact sediment microcosms with high‐purity ...


    By John Wiley & Sons, Ltd.

  • Hypothermia - a cold hearted killer

    Workers are exposed to the elements of winter in many industries where outside labor is mandatory. As you might imagine, hypothermia can and does kill. Humans are designed to function normally at a body temperature of 37° C (98.6° F). Hypothermia is defined as a core internal temperature less than 35 ° C. Employees suffer from hypothermia when they lose body ...


    By SafetySmart

  • 3 Water Utilities that Lowered their Arsenic Levels with AdEdge

    Finding an appropriate solution to address arsenic in raw water can be challenging for utilities. Studies have shown that when ingested in high concentrations, it is linked to cancer in the skin, lungs, bladder and kidney, and can cause significant skin changes, such as thickening and pigmentation, as well as other health issues. For this reason, the ...

  • Asset management in the water industry - the valve actuator`s perspective

    Sector: Water & Effluent Treatment Category: Electric Actuators, Control Networks, Services Products: IQ3 Standard, IQ Insight 2, Pakscan, Retrofit The water and effluent treatment industries have not been slow to recognise the benefits of effective asset management resulting from the gathering and analysis of accurate and relevant data ...


    By Rotork plc

  • Quarry Dewatering Compliance - Case Study

    Louis W. Bray Construction installed a Greyline Area-Velocity Flow Meter in 2009 to meet Ministry of Environment regulations. Their permit stipulated effluent limits plus monitoring, sampling and flow measurement of wastewater discharged from the site to the South Raisin river. The Ontario Water Resources Act requires flow monitoring for any quarry dewatering greater than 50,000 ...


    By Greyline Instruments Inc.

  • Quarry dewatering compliance - Case Study

    Louis W. Bray Construction installed a Greyline Area-Velocity Flow Meter in 2009 to meet Ministry of Environment regulations. Their permit stipulated effluent limits plus monitoring, sampling and flow measurement of wastewater discharged from the site to the South Raisin river. The Ontario Water Resources Act requires flow monitoring for any quarry dewatering greater than 50,000 liters per day. ...


    By Greyline Instruments Inc.

  • Gas blending process adopts CVA for improved accuracy, economy and environmental performance - Case Study

    Overview Rotork’s innovative CVA electric control valve actuator technology has successfully delivered an improvement in performance with reduced operating costs for the vital gas blending process on a European natural gas distribution network. The Reason Fluxys is the independent operator of the natural gas storage and transmission system in ...


    By Rotork plc

  • Rotork valve actuators at hub of automated flood alleviation scheme - Case Study

    Overview An extended scope contract performed by Rotork Site Services has successfully delivered full automation of a flood alleviation scheme protecting the historic town of Cardigan in West Wales. The project involved replacing unreliable actuators from another manufacturer, installing a PLC control cabinet and interfacing with the existing river level sensor and telemetry system. ...


    By Rotork plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you