environmental process monitoring Articles
-
Viable Non Viable Particle Counts
Viable, non viable particle counts: Environmental and Process Monitoring- Annex 1, Section 9.4 In Part 3 of our 5 part blog series, we look at Viable Non Viable (V/NV ) Particle counts regarding Environmental and Process Monitoring as found in Annex 1, Section 9.4: RA should be done to develop a comprehensive environmental monitoring program Sampling locations of cleanroom particle ...
-
Annex 1 Quality Risk Management, Section 2
In Annex 1 Quality Risk Management (QRM) principles and risk-based approaches are prominent expectations. Risk-based approaches are mentioned 43 times in the draft reinforcing the importance of using Risk Based approaches in all aspects of sterile product manufacturing. Here we highlight requirements related to Quality Risk Management that are specifically mentioned in Annex 1, including: ...
-
Cleanroom Process Risk Assessment per Annex 1
In the final part of our five part series of Quality Risk Management per Annex 1, we explore the benefits of a Cleanroom Process Risk Assessment and how our Contamination Control Advisers can provide you with one. Process Risk Assessment: Why it’s important A process risk assessment helps you to to ensure risks are properly controlled. Without a risk analysis: you may have too many or ...
-
TSI dust monitors and Lufft weather sensors make a great team
Both aerosols and wind speed and direction influence air quality significantly. This is why TSI Incorporated, a world leader in particle measurements, cooperates with Lufft USA in order to provide complete systems to measure PM2.5 (fine dust), PM10 (particles with a maximum diameter of 10 μm) as well as total PM levels. TSI Incorporated offers a variety of aerosol monitors for real-time, ...
By OTT HydroMet
-
Building a shared Environmental Information System with the Eastern Partnership countries
Since 2010, the European Union (EU) has been engaging the countries of the Eastern Partnership — Armenia, Azerbaijan, Belarus, Georgia, Moldova and Ukraine — in regional cooperation in order to improve national capacities for managing and sharing environmental data and information. This cooperation was funded by the European Commission and implemented by the European Environment ...
-
High Temperature Dry Block Calibrator
H23500 High-temperature Dry Block Calibrator is indeed a valuable metrological product, especially for calibration labs that deal with high-temperature sensors from 50 ˚C to 600 ˚C and 500 ˚C APPLICATIONS OF H23500Range 50 ° C to 500 °CThe High Temperature Dry Block Calibrator finds application across various industries where accurate and reliable temperature calibration is essential. Some of ...
-
Axetris achieves Silver Gas Award 2013
Here the original text from G&I: „The Axetris AG LGD F200 self-contained laser gas detector module is designed for integration by original equipment manufacturers (OEMs) of selective catalytic reduction (SCR) systems and monitoring equipment and is based on proprietary technology- enhanced tuneable diode laser spectrometry. The OEM module can measure concentrations from well under 1 ppm ...
By Axetris AG
-
The Pitfalls of Process TOC analysis and how to avoid them case study
Since the introduction of Total Organic Carbon (TOC) Analyzers by Dow, Union Carbide and Automated Environmental Systems in thel960,s,l-5\ they have proven to be an invaluable tool in the environmental and process monitoring fields. While technologies have advanced since then, certain performance characteristics required for true process control have been notably absent. The purpose of this paper ...
-
Low Temperature Dry Block Calibrator
The Low Temperature Dry Block Calibrator, with a range spanning from -40°C to 120°C, stands out as an exceptional instrument for the temperature calibration and verification of a diverse array of temperature measuring devices and sensors. Its cutting-edge thermal design guarantees unparalleled precision, accuracy, and consistency. This calibrator boasts a compact and rugged build, facilitating ...
-
Low Temperature Dry Block Calibrator
The Low Temperature Dry Block Calibrator, with a range spanning from -40°C to 120°C, stands out as an exceptional instrument for the temperature calibration and verification of a diverse array of temperature measuring devices and sensors. Its cutting-edge thermal design guarantees unparalleled precision, accuracy, and consistency. This calibrator boasts a compact and rugged build, ...
-
Corrosion Control in data Centers
EU standard 2002/95/EC, or RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), which was implemented in July 2006, restricts the use of hazardous substances in the manufacture of electrical and/or electronic equipment. One of the banned substances is lead (Pb), which is used for soldering circuit boards and other components in hard disks, ...
-
High Temperature Dry Block Calibrator
The High Temperature Dry Block Calibrator, with a range spanning from 50°C to 600°C, stands out as an exceptional instrument for the calibration and verification of a diverse array of temperature measuring devices and sensors. Its cutting-edge thermal design guarantees unparalleled precision, accuracy, and consistency. This calibrator boasts a compact and rugged build, facilitating ...
-
Impact of Corrosion on Electronic Equipment
Corrosion is the destruction of metals through reaction with compounds in their environment. It is a natural process because compounds such as oxides, sulphides and chlorides are formed and these are stabler than pure metals. Electronic circuits and components are omnipresent in our environment. Until recently, the thousands of soldered joints that an electronic circuit contains were made with ...
-
Corrosion Control in data Center
CORROSIVE GASES: Small concentrations, serious consequences EU standard 2002/95/EC, or RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), which was implemented in July 2006, restricts the use of hazardous substances in the manufacture of electrical and/or electronic equipment. One of the banned substances is lead (Pb), which is used for ...
-
The EU Eco-Industry`s Export Potential
Executive Summary DGXI of the European Commission has commissioned this study to provide an analysis of current export activity by the EU eco-industry, the employment effects of this export activity, whether exports can be increased in the future and to develop appropriate policy recommendations for promoting EU eco-industry exports and related employment in the future. Objectives Specific ...
-
FTIR resolution requirements for industrial gas analyses
FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion thermodynamics and ...
-
Major cement manufacturer selects ENVEA to equip plant in Pakistan with certified AQMS system - Case Study
Bestway Group is a diversified family-owned business with an annualized turnover above £4.5 billion. Starting off as a chain of retail convenience stores, the Group has grown to become a diversified multinational business with interests across the wholesale, pharmacy, real estate, cement and banking sectors. The Group is also the largest overseas investor in Pakistan. ...
By ENVEA
-
Where We Are on the Journey to Develop ICP-MS Instrument
ICP-MS, short for Inductively Coupled Plasma Mass Spectrometry, is an analytical technique used for element determination. Combining a high-temperature ICP source, which is for converting the atoms of the elements in the sample to ions, with a mass spectrometer, which then separates and detects the ions. For the scientific fields, a slight improvement of the ICP-MS instrument will bring great ...
-
Morocco: ENVEA provides AQMS Stations in Support of National Air Program - Case Study
According to a national study conducted in 2014, the cost of air quality deterioration in Morocco was estimated at 9.7 billion dirhams equivalent to 1.05% of GDP, recording a notable increase compared to the year 2000. The industrial sector, including the fossil fuel sector, has experienced significant growth. Transport has also developed with the sustained increase in the ...
By ENVEA
-
National Occupational Standards for Environmental Management
The environmental manager is an individual who oversees the process of environmental management by monitoring and coordinating stewardship of the ...
By ECO Canada
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you