environmental sensors Articles

  • Measuring CO2 to Optimise the Bulk Storage of Food

    Meeting the food requirements of a growing global population is becoming increasingly difficult. Despite the need for additional food, it is estimated that 50-60% of grain is lost after harvesting, at a cost of about $1 trillion per year.1 One of the major reasons for lost grain is spoilage due to mould or insect infestation during storage.2 To provide a ...


    By Edinburgh Instruments Ltd

  • Old container, new station: WS600 part of air quality measurement system in Kutaisi

    An AQM station including a Lufft WS600 all-in-one weather sensor was installed by our local system integrator ELKO LLC in Kutaisi, Georgia in May 2017. It was mounted on an existing measurement container provided by the customer LEPL National Environmental Agency. The system consists of a Fidas® 200 fine dust monitor and immission measurement system detecting PM2.5 and PM10 particles ...

  • Relief for Allergy Sufferers: AQM Stations from Plair Visualize Pollen

    The prevalence of pollen allergy is vast, attaining 25-30% of the population worldwide, and this number continues to grow. Symptoms include rhino-conjunctivitis, asthma and eczema. Plair’s Rapid-E system powered with artificial intelligence provides real-time pollen measurements together with other particle present in the air to ...

  • Quality assurance and Quality control technical note

    Introduction For almost 50 years HYDROLAB products have provided dependable sensor technology in a multiple parameter instrument for montioring essential indicators required for assessing water quality in natural waters. Useable data are the lifeblood of any environmental water quality monitoring program and variation in measurement processes impairs the quality of the data that water ...


    By The OTT Hydromet Group

  • Environmental Sensors in Waste Management

    Issue: As part of an increasing sentiment among European consumers that environmental protection is important, concern about the impact of landfill is growing. Sensor technology makes it possible to measure and control inputs to landfill sites and pollutants arising from them. However, the exploitation - or uptake - of such technology has been lower than expected in the waste management sector. ...


  • Wireless Sensors for Environmental Compliance

    Untitled Document When no wires are required for power or signal transmission, monitoring devices not only become less costly to own and operate, but they can also be installed ...


  • Sensors and Sensitivity - The need for smart environmental sensing technology

    With the rapid increase in technology, environmental sensors are required to perform for a multitude of systems and must also comply with the Internet of Things. Over the past 100 years, environmental sensors have mainly been used to forecast the weather. Over the past 10 years, these sensing technologies have spread tremendously and now help to optimize many industrial processes; important ...

  • Subminiature Photoionization VOC Sensor

    Untitled Document 1. Objective Monitoring of Volatile Organic Compounds (VOCs) is required for a number of gas analysis applications, such as: ...

  • BLOOM Wastewater Sensor - Case Study

    Water is an integral input and vital strategic resource for the Ontario Food and Beverage Processing Sector. Water plays a variety of diverse and convergent functions. It is used for heating and cooling, blending, washing and rinsing, convey- ing, cleaning and sanitation – as well as being a vital product ingredient. However, the use of water inevitably leads to the generation of wastewater ...


    By MANTECH

  • IIoT Sensors and Industry Use Cases

    The term “Internet of Things”, or IoT, has been making waves in the industrial, commercial, manufacturing and consumer markets over the past years since the concept was formerly introduced in 2012 by the The Global Standards Initiative on Internet of Things (IoT-GSI). Coined as a term for computing devices that can perceive the world without relying on humans for data input, the ...

  • Nanomaterial resistive sensors: noise, power, and circuit interfaces

    Nanoscale materials such as carbon nanotubes and silicon nanowires offer the exciting prospect of enabling low cost, low power, highly sensitive detectors for a wide variety of chemical and biological materials. The potential of these materials in sensing applications has been demonstrated by researchers around the world. However, several challenges remain to transition this technology from ...


    By Inderscience Publishers

  • Suitable solid state chemical sensor for HCHO determination

    A solid state NiO-polyaniline mixture electrode is proposed and characterised to determine formaldehyde. The influence of ionic strength is particularly significant. The response is slow, so a waiting time, optimised at 90 min is needed, thus preventing a continuous or in-flow condition determination. Some common environmental possible interfering analytes have been tested, the most interfering ...


    By Inderscience Publishers

  • Upgrading from Pellistor Gas Sensors to Infrared Technology

    In this article Andy Avenell, Crowcon’s Fixed Systems Product Manager, considers the shift towards infrared (IR) gas sensor technology in the oil and gas industry. Abstract Flammable gases and vapours can present considerable dangers in many industrial applications, none more so than the processes involved in extracting, transporting and processing oil and gas. Fast and reliable ...

  • Completely Integrated Environmental Management

    Environmental information management isn't what it used to be. It's no longer about software programs that manage data and write reports, but whole programs that do everything. As a wider array of companies offer environmental information management systems (EMIS), and as in-house and desktop software solutions have become more common, EMIS options become wide indeed. EH&S managers are ...


    By Chemical Safety Software

  • What is Environmental Restoration?

    The U.S. Department of Energy's (DOE's) Environmental Restoration Program directs the assessment and cleanup of inactive sites and surplus facilities contaminated from previous defense and non-defense-related programs. All cleanup activities must comply with federal, state, Indian Nation, and local laws and regulations. In completing environmental restoration activities, DOE is committed to ...

  • TSI dust monitors and Lufft weather sensors make a great team

    Both aerosols and wind speed and direction influence air quality significantly. This is why TSI Incorporated, a world leader in particle measurements, cooperates with Lufft USA in order to provide complete systems to measure PM2.5 (fine dust), PM10 (particles with a maximum diameter of 10 μm) as well as total PM levels. TSI Incorporated offers a variety of aerosol ...

  • Mobile sensors about to conquer Lithuania – successful MARWIS test

    Lithuania is divided into 10 regions (districts): Alytus, Kaunas, Klaipėda, Marijampolė, Panevėžys, Šiauliai, Tauragė, Telšiai, Utena and Vilnius. All of these should be equipped with our latest mobile road sensor technology to support winter services and make their jobs more environmentally friendly. A region is already taking part: From beginning 2016 on, Utena ...

  • Learning by doing: Lufft weather sensor supports school in Ukraine

    The Kherson Hydro-Meteorological Technical School educates among others future hydrologists and meteorologists. As learning by doing is the best approach, they use meteorological weather stations to train their students for future tasks. In the following you’ll find out, how we were able to support them with state-of-the-art technology. About Kherson Hydro-Meteorological Technical School in ...

  • Assimilation of weather radar and binary ubiquitous sensor measurements for quantitative precipitation estimation

    Assimilation of data from heterogeneous sensors and sensor networks is critical for achieving accurate measurements of environmental processes at the time and space scales necessary to improve forecasting and decision-making. Owing to different measurement accuracies and types of spatial and/or temporal measurement support of the component sensors, it is often unclear how best to combine these ...


    By IWA Publishing

  • Application of nanocrystalline metal oxide gas sensors for air quality monitoring

    Increasing concern regarding health effects caused by air pollution, together with the limited spatial resolution achievable with conventional monitoring stations, have driven efforts to develop inexpensive metal oxide gas sensors for air quality measurements. The sensing mechanism is dependent on physicochemical reactions between adsorbed gas molecules and oxygen species on the oxide surface, ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you