exhaust abatement system Articles

  • Paint & Coatings Manufacturer Selects CPI RTO

    Catalytic Products International (CPI) recently completed the installation of a new TRITON Series Regenerative Thermal Oxidizer (RTO) to a Midwest USA location of a global paints and coatings manufacturer for the abatement of Volatile Organic Compounds (VOCs). ...

  • Case study - ETO sterilizer abatement

    OVERVIEW Product sterilization companies are generally required to utilize a pollution control device for treatment of exhaust gases from their aeration room and sterilization chambers.  In the United States, they need to be in compliance with NESHAP (National Emission Standards for Hazardous Air Pollutants) regulations that dictate a 99% destruction efficiency of EtO (Ethylene ...

  • Minimizing Operating Costs in VOC Abatement Equipment

    Untitled Document As governmental regulations of environmental emissions become more restrictive, the average concentration of Volatile Organic Compounds (VOC's) has decreased as more ...

  • Landfill waste gas abatement - Case study

    For over 43 years Catalytic Products International has designed and manufactured specialized oxidation systems for use in controlling process-related VOC emissions. The QUADRANT-NRV Series Thermal Oxidation System is designed for use with the low-volume/high-BTU waste gas stream emitted from many landfill gas purification processes. As we utilize our Venturi Burner Package to process the waste ...

  • Case study - Engine cell exhaust: Catalytic oxidizer

    Overview Endurance testing of outboard motors for boats has typically been done in lakes and sometimes on barges. This testing was time consuming, presented logistic problems and removed the testing from the R & D department and the factory. When a company in Oklahoma decided to build their own endurance test cell area, the Environmental Protection Agency required them to control the ...

  • VOC Abatement Technology Saves on Operating Costs for Aerospace Paint Finishing

    For over 10 years, a Canadian aircraft manufacturer has saved over $500,000 annually in fuel and electricity consumption by using Munters rotor concentrators to control solvent emissions from its facility’s paint booths. Before purchasing Munters equipment in 2002, the manufacturer struggled with the inconvenience of having their aircraft systems flown to be painted in subcontracted paint ...


    By Munters

  • Regenerative Thermal Oxidizer + Zeolite Wheel for VOC Emissions Abatement - Case Study

    Case Study: “Heceygo Project” Ehaust Air Treatment Regenerative Thermal Oxidizer For Voc Emissions Treatment ZEOLITE ROTOR-CONCENTRATOR + REGENERATIVE THERMAL OXIDIZER The Technical Solution For Large Air Flows With Low Solvent Concentrations PROJECT MAIN DATA: ...


    By Tecam Group

  • Case study - Oxidizer system optimization

    OXIDIZER SERVICE SERIES: PART 4 As promised, this is the fourth installment of Anguil's Oxidizer Service Series. If you have read through the first three parts, this can be seen as a capstone of those efforts. Having a strong oxidizer service plan, backed up with recommended spare parts and all of the proper documentation will not only improve your system performance but also allow you to focus ...

  • IRGAS XFlo: process gas FTIR system for flange mounted applications

    Introduction When doing process tool or exhaust abatement tool installations, it is desirable to monitor the exhaust gases as a means of controlling or setting up the tool 1, 2. FTIR, with its rapid analysis speed, high sensitivity, and ease of use, offers one means of monitoring such systems at the time of installation and during the working life of the tool. Often, these applications ...


    By CIC Photonics, Inc.

  • EIS Safety First - Case Study

    EIS was invited by a UK company to provide a fully automated VOC / odour abatement system treating the exhausts from multiple processes and needing multiple safety systems.  The abatement plant would be part of the construction of a new factory based in Scotland, so the timing and installation of the system would be critical to the plant coming on stream at the planned date. The production ...

  • Case study - Seattle food processing plant naturally destroys odors while creating natural products

    Challenge: A food processing company in Seattle was experiencing odor problems while processing food scraps into a natural liquid fertilizer. The odors were coming from exhaust stacks during the final stages of fertilizer production. Located in an industrial/commercial area in close proximity to other facilities, the}' needed a solution to stop odor complaints from their neighbors. ...


    By OMI Industries (OMI)

  • Controlling Pharmaceutical Coating & Drying Process Emissions

    Capturing and destroying harmful emissions from pharmaceutical processes can be challenging. It’s not because the volatile organic compounds (VOCs) are difficult to destroy using catalytic or thermal techniques. It’s because their concentrations can be so high. These process streams raise safety concerns, both when they’re collected in vents and when they reach the final ...

  • Air emissions from the automobile manufacturing industry a bio-oxidation pilot study of paint emissions control

    Bio•Reaction Industries (BRI) was contacted by Toyota to assess the abatement potential of an engineered bio-oxidation system (biofilter). The proposed intent of the pilot was to evaluate the effectiveness of biofiltration as available alternative to traditional VOC removal technology on an existing 3 stage wheel paint booth. A pilot unit consisting of a biotrickling filter and a separate ...


  • Air Emissions from the automobile manufacturing industry: a bio-oxidation pilot study of paint emissions control

    Bio•Reaction Industries (BRI) was contacted by Toyota to assess the abatement potential of an engineered bio-oxidation system (biofilter). The proposed intent of the pilot was to evaluate the effectiveness of biofiltration as available alternative to traditional VOC removal technology on an existing 3 stage wheel paint booth. A pilot unit consisting of a biotrickling filter and a separate ...


  • Case study - Controlling odors at a specialty plastics manufacturer

    Challenge A specialty plastics manufacturer in the eastern United States makes a plastic compound that, because of its unique and desirable properties, is widely used in the automotive industry. Complications arose for this manufacturer because, in the production process, mercaptans are driven off and produce a non-hazardous but offensive nuisance odor problem. The ...


    By OMI Industries (OMI)

  • Case study - Bespoke Solutions

    PROJECT 700kg/h animal remains incineration project in accordance with EU WID (Waste Incineration Directive 200/76/EU) Chrzanów , Poland PROJECT DESCRIPTION The purpose of the plant was a combined waste disposal / energy recovery. In-stalled at a large meat processing plant the plant was designed to process approxi-mately 700kg/h per of ...

  • Efficiency Bonus From Ford’s Emission-Beating Ovens

    EFFICIENCY BONUS FROM FORD’S EMISSION-BEATING OVENS When Ford decided it was time to refurbish and upgrade two primer ovens and systems at its Dagenham plant in Essex, UK, the company looked to the future. Against a worldwide background of rising concern over environmental issues and pollution, Ford decided to make use of the opportunity to reduce VOC emissions. They aimed for a system ...


  • Product Spotlight: Regenerative Thermal Oxidizer - Case study

    Oxidizer case histories in the pharmaceutical industry The pharmaceutical industry faces unique challenges in complying with environmental pollution and emission control regulations. Three pharmaceutical process case studies are examined: fluidized bed drying, tablet coating and reaction vessels, and batch operations. Recently, a contract drug manufacturing company faced violation ...

  • Case study - Meat processing odor control

    Overview For its first two years of production, a food manufacturer based in South Wales, England, focused its production on potatoes. Neighborhood residents voiced no complaints about odors during this time period. However, as new production lines (including barbequed meats and curried chicken) were added, the complaints began, and it became clear that odor abatement equipment was needed ...

  • The Greening of Carbon Fibre

    Carbon fiber is a material that has, and will continue to revolutionize the products we use every day by making them stronger, lighter and more durable.  Experts estimate that the specialty material is twice as stiff as steel and five times stronger, per unit of weight.   It is made from organic polymers which consist of long strings of molecules held together by carbon atoms.  The ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you