exhaust volume monitoring Articles

  • Safe disposal of exhaust gas from storage tanks in Finland

    Type     HOFGAS®--IPM 6500 and 4 xHOFGAS®- IFM4c 15000 Performance     Blower station 6,500 Nm³/h - Flare burner 4x1,650 Nm³/h / 4x15,000 kW Client     Neste Jacobs Oy (FI) Situation Every fortnight a tanker delivers oil from Russia to Finland. The tanker docks at the port of Naantali and the oil is conveyed to storage ...


    By Hofstetter BV

  • Who Needs Continuous Emissions Monitoring?

    Continuous emissions monitoring (CEM) is about monitoring air pollutants generated by a specific activity and emitted to the ambient air, typically through a tall stack or other exhaust pipe. The “activity” can be some industrial process like a power plant or a waste incinerator, but it can also be on a much smaller scale such as a car equipped with an internal-combustion engine. ...


    By Opsis AB

  • Analysis of monitoring results of the separation and greywater treatment system at Chester Woods Park, Olmsted County, Minn.

    Introduction In 1993, Olmsted County installed an advanced individual sewage treatment system (ISTS) at the caretaker's residence at a County-owned park to demonstrate waste load reduction and downsizing of drainfield area. The subject system has two components--1) a composting/vermiculture blackwater system and a 2) aerobic graywater treatment system. The separation of the high strength ...


  • IRGAS XFlo: process gas FTIR system for flange mounted applications

    Introduction When doing process tool or exhaust abatement tool installations, it is desirable to monitor the exhaust gases as a means of controlling or setting up the tool 1, 2. FTIR, with its rapid analysis speed, high sensitivity, and ease of use, offers one means of monitoring such systems at the time of installation and during the working life of the tool. Often, these applications ...


    By CIC Photonics, Inc.

  • Using Permeable Eco-Paving to Achieve Improved Water Quality for Urban Pavements

    This paper describes the planning, design and construction of a permeable pavement as a practical demonstration of the benefits of eco-paving in Australian environmental management. The paper addresses the use of permeable pavements as part of a Water Sensitive Urban Design that allows infiltration of stormwater, reduction of pollutants and slow reticulation of the stormwater to an ecologically ...


    By Advanced Pavement Technology

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • Like a phoenix from the ashes

    Thanks to growing environmental awareness, waste is increasingly being separated and recycled. However, residual waste always remains that can't easily be recycled. This ends up in waste incineration plants (referred to as KVAs in Swiss German) for disposal and reclaiming, such as the KVA Linthgebiet in Niederurnen in the Swiss canton of Glarus. Due to the strict environmental specifications ...


    By Metrohm AG

  • Radiological Evaluation of contaminated sites and soils VEgAS: an expertise and investigating vehicle

    Summary 1- Fontenay-Aux-Roses CEA Clean-up methodology For the denuclearisation of the first French nuclear research centre (CEA), the centre of Fontenay-aux-Roses started developing in 1999 a clean-up methodology to rehabilitate places that have been contaminated by radioactive materials. The structure of this methodology is comparable to the one that the ...


    By Geovariances

  • Thermal Power - Guidelines for New Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Why measuring the ambient NO2 without conversion?

    Nitrogen oxides NOx are pollutants that may have particular impact in terms of greenhouse gases, acidifying air etc ... issuance increased significantly since 1950 with the massive development of transport and industries. It therefore becomes necessary to provide measures always safer these pollutant gases, and to know the reliability of results. Currently, 60% of emissions of NO and NO2 are ...


    By Environnement S.A

  • Case study - Destruction of inert process emissions

    Many chemical companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the emissions produced are inert (little or no ...

  • Case study - Reactor vent emission control

    OVERVIEW Many chemical and petroleum companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the ...

  • Manure Spills: Prevention, Detection, Control Options, & the Role of Anaerobic Digesters

    An internet search for manure-related spills can lead to an exhausting list of news articles and images of catastrophic environmental damage. In Wisconsin alone, the ...


    By BIOFerm™ Energy Systems

  • Solvent Recovery System Keeps Presses Rolling at World`s Largest Gravure Printing Plant

    When QUAD/GRAPHICS Inc. entered the publication gravure printing market, it followed the axiom of Daniel Burnham, the 19th century architect and urban planner, to 'make no small plans.' In 1985, the Pewaukee, Wis.-based printing company purchased two 96-inch web, eight-color, high-speed presses and installed them at its new printing plant in Lomira, Wis., near Milwaukee. Conventional wisdom at ...


    By AMCEC Inc.

  • Double Duty Scrubber for TDI Fumes A case-history description of a relatively uncomplicated but effective method for handling large runaway emissions of TDI and solvent vapors.

    NKI (B. V. Nederlandse Kleurstofindustrie, a subsidiary of Morton-Thiokol, Inc. U.S .A.), and one of the major industrial firms in the Netherlands, had a problem with extremely toxic TDI (toluene di-isocyanate) emissions from one of their processes . On a batch basis in different reactors, the largest being 6.5 m cubed(1717 U.S . gallons), a solution polymerization of TDI with polyols in a ...


    By CR Clean Air Group, LLC

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Determining trace amounts of contaminants in water

    Introduction Pesticides, polychlorinated biphenyls (PCBs), and pharmaceuticals are a worldwide contamination problem. Several major US water bodies, such as the Hudson River, St. Lawrence River, Fox River and the Great Lakes have been contaminated with PCBs from industries discharging into these water bodies for decades. For example, from approximately 1947 to 1977, the General Electric ...


    By Horizon Technology, Inc.

  • Comparing TGA, FTIR and fixed filter infrared analyzers for measuring soot levels in in-service lubricants

    Measuring soot in diesel engine oil has become more important as soot levels get higher due to exhaust gas recirculation. As soot isone of the key indicators for the condition of the oil, diesel engine maintenance programs performing regular soot checks can realize cost savings by extending drain periods and reducing used oil disposal. TGA (Thermal Gravimetric Analysis) is the traditional method ...


    By Spectro Scientific

  • Catalytic Oxidizers…What You Should Know.

    Within the U.S., depending upon specific plant operations, geographic locations, etc.,  many companies concerned with controlling VOC emissions have been operating air pollution control systems for years.  However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...


    By The CMM Group, LLC

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you