exhauster system Articles

  • MSW Management: Safely Countering the Rise of Landfill Odors

    One of the core challenges of landfill and compost site management is fighting the rise of foul odors. In addition, as communities expand further out from previous areas, they eventually become neighbors to landfills – calling for a comprehensive odor-control approach to countering odor complaints. In fact, compared to other industrial applications such as wastewater treatment and asphalt ...


    By OMI Industries (OMI)

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • E-Z Trays an Integral Part of Levelland`s Groundwater Treatment - Case Study

    QED E-Z Tray® Air Strippers an Integral Part of Levelland's Groundwater Treatment System The refinery at the former Motor Fuels Corporation produced all grades of gasoline, tractor fuels, diesel, distillate products, and fuel oils. It closed in 1954 after 15 years of operation, and the refinery equipment was removed by 1958. The property has since been redeveloped, but the ...


    By QED Environmental Systems

  • A new exhaust ventilation system design software

    By industries development, the amount of air contaminants that are released in workplace has grown increasingly. To reduce these contaminants, there are several methods that, one of which is control at source. Industrial ventilation is perhaps the most powerful tool available for environmental professionals to control workplace pollution. Exhaust ventilation can capture contaminants at source, ...


    By University of Tehran

  • Allweiler pumps in exhaust gas treatment systems in ships

    As environmental regulations become more stringent, waste gas treatment systems are growing in importance. H+H Umwelt- und Industrietechnik GmbH of central Germany has been using Allweiler progressing cavity pumps as a core component of these systems since 2003. The company has been manufacturing catalytic waste gas treatment systems since 1998. Originally they focused on applications in block ...


    By ALLWEILER GmbH

  • Cost Effective Corrosive Fume Exhaust System

    Background:Independent Sheet Metal, a northern New Jersey firm engaged in the fabrication and installation of sheet metal ductwork for heating, ventilation and air conditioning (HVAC) systems had a customer give them a tough assignment. A large pharmaceutical manufacturer requested a recommendation for a cost-effective corrosive fume exhaust system for their multiple scale organic building ...


    By FAB-TECH Incorporated

  • On-Vehicle Exhaust Gas Cooling in a Diesel

    ABSTRACT A diesel emissions control system built and tested on an industrial forklift truck is described. The system utilizes a pleated media type diesel soot filter. The temperature limit of the filter material is well below the temperature of the exhaust gas. Therefore, cooling of the exhaust gas is ...


    By DCL International Inc.

  • Vapor intrusion mitigated through solar-powered exhaust systems

    EPA Region 6 undertook a Superfund removal action earlier this year at the Delfasco Forge site in Grand Prairie, TX, to address trichloroethene (TCE) vapor migrating from a groundwater plume. Region 6 and the State had determined after extensive site investigations that technologies such as soil vapor extraction or natural attenuation would require several years to remove or reduce the plume ...

  • Battle Creek Air National Guard uses exhaust removal system

    Monoxivent provided XL-Series Hose Reels to capture diesel exhaust fumes from military vehicles at Battle Creek Air National Guard. The reels featured 50’ of exhausting hose in 12” and 14” diameters. The drums were 36” diameter by 7’ wide. The reels were chain driven and explosion proof. A stainless steel tapered cone adapter with spring clamp and dual handles also ...


    By Monoxivent

  • Metals: Scrubber System Removes HCL from Exhaust Case Study

    Although Indiana’s environmental protection agency has not yet added hydrochloric acid (HCl) standards to its Title 5 regulation of emissions sources, Allomatic Products Co., Sullivan, IN, was determined to erase HCI vapors from its plant discharge. In the mixed industrial/ residential neighborhood where its manufacturing plant is located, Allomatic wanted to be known as a good neighbor. ...


    By CR Clean Air Group, LLC

  • Pennsylvania air national guard uses exhaust removal system

    Monoxivent’s 9000-MTR Hose Reel was used to remove toxic exhaust fumes from military vehicles at the Pennsylvania Air National Guard. Monoxivent's motor-operated hose reels are the premier solution to exhaust extraction. They provide the answer for customers who have obstructions, which prohibit the use of other types of overhead-exhaust systems.  At the Air National Guard facility, ...


    By Monoxivent

  • Automotive: Scrubber system removes HCL from Exhaust case study

    Although Indiana’s environmental protection agency has not yet added hydrochloric acid (HCl) standards to its Title 5 regulation of emissions sources, Allomatic Products Co., Sullivan, IN, was determined to erase HCI vapors from its plant discharge. In the mixed industrial/ residential neighborhood where its manufacturing plant is located, Allomatic wanted to be known as a good neighbor. ...


    By CR Clean Air Group, LLC

  • Magnetic Grabber ensures effective exhaust removal

    The challenge The Marshfield Fire & Rescue Department has been using a number of SBT-Pneumatic systems of Plymovent since 2004. The SBT-Pneumatic systems have been removing vehicle exhaust gasses from the emergency vehicles - such as fire trucks and ambulances - inside the service station. The Magnetic Grabber® was installed ...


    By Plymovent Group BV

  • Exhaust removal at Ag equipment dealership in Michigan

    Company Name: FIllmore Equipment Co., Three Rivers, MI; Monoxivent Sales Rep: Marshall & Wells Original Contact: Dave Timmerman, Owner Fillmore Equipment; New Store Contact: Matt Henckel, Agricultural Service Manager Dave Timmerman, from Fillmore Equipment Co, needed a solution to vent John Deere equipment he sells and services at his new location. Timmerman needed to capture the exhaust ...


    By Monoxivent

  • Removal of vehicle exhaust fumes at fire stations

    The challenge The fire brigade of Kassel (Germany) was looking for three new vehicle exhaust extraction systems. Systems that would remove exhaust fumes very effectively, protecting the fire fighters from hazardous diesel exhaust fumes. Other fire stations within the Kassel region were already provided with extraction systems. The fire brigade of Kassel choose for a fully ...


    By Plymovent Group BV

  • Case study - Engine cell exhaust: RTO

    Problem A Mid-western outboard engine manufacturer bought a three year-old plant for the production of its marine engines. When finished the engines are removed from the assembly line and run for quality control. The 25,000 SCFM of exhaust from testing contains volatile organic compounds (VOCs) that require regulatory compliance. Also, within this exhaust is a great deal of water vapor ...

  • Time-resolved ammonia measurement in vehicle exhaust

    The objective of this study was to identify the influence of sampling and analytical approach on the quality of NH3 emission data of a gasoline-fuelled three-way catalyst vehicle. NH3 concentration measurements have been performed in the tailpipe and in the diluted exhaust after a constant volume sampling (CVS) system during five different test cycles. Chemical ionisation mass spectrometry ...


    By Inderscience Publishers

  • Case study - Engine cell exhaust: Catalytic oxidizer

    Overview Endurance testing of outboard motors for boats has typically been done in lakes and sometimes on barges. This testing was time consuming, presented logistic problems and removed the testing from the R & D department and the factory. When a company in Oklahoma decided to build their own endurance test cell area, the Environmental Protection Agency required them to control the ...

  • Case study - Engine test cell exhaust: RTO

    Overview A Mid-western outboard engine manufacturer bought a three year-old plant for the production of its marine engines. When finished, the engines are removed from the assembly line and run for quality control. The 25,000 SCFM of exhaust from testing contains volatile organic compounds (VOCs) that require regulatory compliance. Also within this exhaust is a great deal ...

  • Indoor Cats Improve Quality of Exhaust Emissions

    For over two decades, the automotive industry has struggled to keep up with emission standards by installing emission control systems that are increasingly more sophisticated and expensive.  In the meantime, emission control for materials handling equipment has not been a major concern. Without having to meet stringent ...


    By DCL International Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you