explosion protection process industry Articles

  • Reducing the risk of dust explosion hazards

    In the wake of recent tragic and highly publicized dust explosions, companies are asking, 'Could that happen here?' and 'What can I do to prevent such an incident at my facility?' One approach is to manage dust explosion hazards as though they were subject to OSHA’s Process Safety Management (PSM) requirements (29 CFR 1910.119), even though dust hazards often are not covered under this ...


    By ABS Consulting

  • How To Avoid Dust Explosions In Your Baghouse

    A massive fire and explosion in the dust collection system of a New Hampshire wood pellet manufacturer demonstrates the need for adequate system design to prevent combustible dust explosions in general industry.  We recently published a news article on Environmental-Expert.com about OSHA’s enforcement actions concerning last year’s combustible dust fire and explosion at the ...


    By Baghouse.com

  • A Cost-Effective Approach to Explosion Consequence Modeling

    Failure to identify and mitigate explosion hazards is a persistent cause of industrial accidents, impacting sites ranging from fertilizer storage facilities to refineries. While some explosion consequence assessments are performed to comply with regulatory requirements or industry-specific process safety standards, in many cases the potential for loss of life and property damage is overlooked ...

  • A review of layer of protection analysis techniques for oil and gas industry

    The paper indicates advantages (and disadvantages) of layer of protection analysis (LOPA) over other methods to support its paramount position among different process safety analysis (PSA) methods in use today. Its simplicity (using order-of-magnitude estimates for all elements that constitute an accident scenario), universality (easy adaptation to particular needs), directness to indicate the ...


    By Inderscience Publishers

  • Processing Hazardous Waste

    AVA is one of the leading suppliers of machines and system solutions having its core competencies in mixing and drying of any kind and in any industry. One of AVA’s vital businesses lies in developing and supplying turn-key (mobile) plants for processing contaminated recyclables and wastes using high vacuum and/or high temperatures. Comprising the core elements ...


  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Keeping Everything Flowing - How process technology from ProMinent secures optimal flow for industry

    Do you know about the flow? That warm and fuzzy feeling when everything is running perfectly? Transferred to the field of process technology, this ideal condition has been reached when all components within a processing plant interact perfectly with one another, when processes are executed efficiently, safely and economically and the system is capable of delivering its maximum productivity. To ...

  • Nuclear Industry Testing of PetroZorb Application

    The article describes application of PetroZorb microporous sorbent for application to the removal and disposal of radioactive liquids in the nuclear industry.  The material removes the presence of liquid, enabling the waste to be transported as a solid, and reduces the radioactive vapors to an acceptable level. Previous to this ...


    By Safety DImensions (SDI)

  • Fire and Gas Protection Systems as Part of Safety Instrumented Systems and Risk Management

    Garth Watkins, Director Europe, Middle East, Africa, Detector Electronics Corporation, Presented at HazardEx International Conference 2008 Process-systems operators today face increasing demands for lower costs and higher safety standards in an increasingly regulated environment. In addition, companies desire to provide a working environment that is as safe as possible. As a result, plant owners ...

  • Controlling Pharmaceutical Coating & Drying Process Emissions

    Capturing and destroying harmful emissions from pharmaceutical processes can be challenging. It’s not because the volatile organic compounds (VOCs) are difficult to destroy using catalytic or thermal techniques. It’s because their concentrations can be so high. These process streams raise safety concerns, both when they’re collected in vents and when they reach the final ...

  • Water and wastewater treatment for Solar industry

    Solar cells arc manufactured in a complex process thai requires enormous know-how. The objective is to produce panels with a high level of efficiency at low cost. To achieve this, different production processes are used. A fundamental distinction is made between solar cells on the basis of silicon wafers and thin-film cells, in which a special process is used to apply the photovoltaic layer onto ...


    By EnviroChemie GmbH

  • Updating process safety culture: Lessons from BP Texas refinery incident

    “That which is everybody’s business is nobody’s business” - Izaak Walton Chemical process plant safety and accident investigation has attained major strides in the past thirty years. Inquiry reports on catastrophic process plant accidents like Flixborough, Piper Alpha, Bhopal, Chernobyl revealed key areas where strengthening is needed to prevent major accidents in the ...

  • Solidification / Immobilisation of sludge from physical-chemical WWT process

    In 2003 econ received an inquiry from a service company operating an industrial waste water treatment plant. At the end of the physical-chemical WWT process this client generated metal-hydroxide sludge from his chamber filter presses. Originally he discharged the sludge into skips and brought it to a hazardous waste landfill. At this landfill, a solidification process was used to stabilise ...


    By econ industries GmbH

  • Chlor-Alkali Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Petrochemicals Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Uni-wash wet dust collectors reduce industrial dust hazards

    Metal dust — it can be a fabricator’s worst nightmare. In particular, the combination of dry aluminum dust and steel dust is literally a disaster waiting to happen. The National Fire Protection Association has a list of metal dusts and the specific PPM that the air can hold of each before the serious risk of an explosion arises. As a worksite approaches the PPM safety limits of one or ...


    By ProVent, LLC

  • Elemental Chlorine-Free (ECF): Pollution Prevention for the Pulp and Paper Industry

    Imagine being in charge of a chemical company. One day a fire breaks out, and an employee, designated as a first responder, is killed fighting the blaze. Then OSHA investigators discover that the man died primarily because both his training and his equipment were inadequate. This scenario is why CPL 2-2.59A should put anyone who runs a HAZMAT facility into a state of introspection. These ...

  • Base Metal and Iron Ore Mining Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution missions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you