filter bag Articles

  • Multi-bag filter housings

     Multi-bag filter housings are working for high-volume applications demanding frequent filter bag change-outs. Available in a wide variety of configurations with 4 to 24 filter bags per housing. Options include various input/output positions and sizes, material choices and closure designs.Bag filter vessel Operation and maintenance Check the pressure at import and export When the pressure ...


    By TT Filtration, LLC

  • PP Liquid filter bags

    Product Description:Polypropylene/Polyester liquid filter bag,Micron Polypropylene/Polyester filter fabric manufactured  PP filter bag(Micron Polypropylene filter fabric) have a lower fiber release,  more defined pore size and greater retention efficiency than other filter media(filter bag).  Liquid PP filter bag offer high efficiency filtration and have a high solids catch ...

  • Advantages and basic facts for the use of Lenzing PROFILEN based filter media

    Normal PTFE filter bags have a very good chemical resistance but on the other hand they do not have a high dust separation efficiency. Lenzing PROFILEN® is a compromise between a high efficiency and a high flow rate after cleaning of gases with all the positive aspects of normal PTFE bags. Basics To acquire a better feeling and understanding for the advantages of Lenzing PROFILEN® it is necessary ...

  • Partial or full bag replacement: Truth versus fallacy

    Replacing filter bags on demand may seem like a convenient way of managing maintenance costs. But waiting to replace bags at the point of failure, or just before, can lead to a greater risk of non-compliance with emissions standards, higher costs, and higher overall emissions levels. So why are some cement producers opting for partial replacement over full? With cement plants working around the ...


    By FLSmidth AFT

  • gaiasafe filter products for drinking water purification - Case Study

    Problem In some water works chlorination of drinking water is used to eliminate mikrobes. Chlorinated water may have disagreable taste and smell. Some water works use aluminium salts to clean the water. This leads to low concentrations of aluminium in drinking water. Today it is known that aluminium may be toxic to men. Old piping installations inside or outside private homes often where ...


    By gaiasafe GmbH

  • Global Filter Bags Market

    filter bag manufacturer     The research report first makes known to the Filter Bags basics: descriptions, classifications, applications and industry chain overview, industry policies and plans, product specifications, manufacturing processes, value structures and so on. Then it analysed the world’s main region Filter Bags market ...

  • PPS STAPLE FIBER 2D*51MM

    pps staple fiber can be widly used for dust filter bag. main spec: 1.5d/2.0d * 51mm/64mm We produce CNV®PPS with the productivity of 5000Tons annually. The products catalog of CNV®PPS includes spun grade and non-woven grade. We manage our production and company under ISO9001 and ISO14000 standard system. Commit to world quality control and logistic service for all customers domestic and ...


    By CNV GROUP LIMITED

  • Case 20 Guohua Shenmu Power Plant - Case Study

    Unit capacity: 2*110MW Rotary injection of low pressure pulse bag filter Flue gas volume: 2 800000m3 / h Entry temperature: 131.7 ° C Inlet concentration: Received base sulfur: ...

  • Advantages Of The Pulse Jet Type Bag Filter

    The pulse jet type bag filter is the most cost-effective dust removal equipment. It can effectively complete the dust removal task in various places and environments. It is one of the most advanced dust removal equipment in the market at present. It is improved by researchers on the basis of the old baghouse ...

  • Are You Using Bag Filters to Control Dust Emissions?

    Power plants, cement plants, steel plants, smelters, asphalt plants, incinerators, food manufacturers, chemical producers, pharmaceutical producers, and other industrial companies are widely using bag filters to control Dust Emission. On some applications bag filters are also used to capture other product coming out of mills, for example, cement, coal, and other raw materials. Fabric filters, ...


    By Codel International Ltd

  • Effects of various chemical cleaning conditions for pressured MF process

    A pilot-scale pressured hollow-fiber microfiltration (MF) process as pretreatment for the reverse osmosis process was studied and operated under various conditions to assess the relative influence of backwashing, chemical enhanced backwashing (CEB), and bag filter application. The pilot plant process consisted of backwashing but without the CEB or the bag filter as the first step of the ...


    By IWA Publishing

  • How to Measure Dust Collector Filter Bags

    Need new filter bags? Learn how to measure them and which dimensions are most critical. If you’re looking to replace your filter bags, your first step is to make sure you get the right measurements. If you have a double beaded snap band filter bag, there are three crucial dimensions you’ll need in order for your supplier to get you the right replacements. We’re ...


    By U.S. Air Filtration Inc.

  • Ready, set... mix: water re-use and its role in concrete mixing

    Water is a key element to the concrete ready-mix manufacturing process. From mixing new concrete to cleaning out trucks, high volumes of water are in demand. To stay ahead, many operations, large and small, are prepared to re-evaluate their process to find opportunities for water re-use. A filter press is an effective piece of equipment for concrete water recycling. It separates ...


    By M.W. Watermark LLC

  • To prevent blinding in dust collection systems, consider filter type, filter size and selection of the filter media used

    All dust collection systems, regardless of size, share a common problem—dust blinding. Simply stated, blinding is defined as when dust particles plug the holes in a filter and stop the flow of air through the filter, resulting in the dust collector performing poorly. All types of collectors, whether stand-alone units, cyclones or full-scale baghouses, are subject to blinding. To better ...


    By American Fabric Filter Co

  • Case 19 Datang Mozambai Power Plant - Case Study

    Unit capacity:2*200MW Dust collector type: electric bag compound dust collector Boiler capacity Amount of flue gas:2*759222m3/h Inlet temperature:154°C Instantaneous temperature of ...

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

  • BCP™ 2430 - Detergent Manufacturing Facility - Injection Mold Cooling System - Bio-organic & Corrosion Deposit Control - Case Study

    Problem – Plastic Bottle Mold Defects A bottle manufacturing plant in Utah was experiencing high reject rates due to poor injection mold cooling. This resulted in high plastic recycle costs and the need to extend mold change times for extensive cleaning of the molds’ cooling channels. Cause of Problem - Biofouling Poorly controlled microbial ...


    By AMSA, Inc.

  • High-Tech Filters

    The current economic situation of the cement industry creates sensitivity regarding off-times and process stability. More stringent air-pollution laws, especially when using waste-derived fuels, are drawing more attention to the off-gas cleaning facilities, usually bag filters. This article does not deal with electrostatic precipitators - as even they have well known disadvantages. By using more ...


    By Evonik Fibres GmbH

  • PPS Filter Felt Bag

    PPS Filter Bag description: Material: Polyphenylene sulfide (PPS) Common industries and conditions: for coal-fired boilers, waste incineration, metal smelting, chemical ...

  • Monlangroup retrofit of Cincinnati “full cycle recycler”

    Challenge Manufacturer purchases a recycling system that isn't meeting their need to extend the life of coolant and reduce coolant and disposal costs. Customer Gardner-Denver Industry Compressed Air and Gas, Vacuum and Fluid Transfer Products Tramp Oil Separator Paper Roll Filter ...


    By PRAB, Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you