filter bag manufacturer Articles

  • Improve performance by installing a larger filter bag

    YOU MIGHT NOT NEED a more powerful dust collector after all. That’s the word from woodworkers who’ve replaced the original equipment filterbags on their collectors with bags that are more efficient. You might ask, “What can be more efficient than the 1 micron bag that came with my collector?” The answer is a 1 micron bag that’s properly sized for your machine and ...


    By American Fabric Filter Co

  • Water contamination problems solved at automobile air bag manufacturing plant

    The Facility Based in a Rocky Mountain state, this facility produces the sodium azide pellets contained inside the air bags for automobiles produced throughout the world. The Problem During the manufacturing of the air bag propellent, frequent equipment washdowns produce large volumes of wastewater that contain sodium azide and metal sulfide salts. Sodium ...

  • Manufacturing facility cleaning case study

    The Challenge A large Industrial manufacturing facility found that their process used to perform the necessary tasks was creating an undesirable accumulation of heavy metals dust throughout the entire plant. Not only was this a potential health risk to the plant workers, there was a structural and safety problem because the dust could spark and cause a fire or explosion. ...


    By Enviro-Vac Corp.

  • Cleaner Production in Confectionery Manufacturing: Cadbury Schweppes

    Cadbury Schweppes Pty Ltd has implemented a large number of cleaner production initiatives at it's Ringwood Confectionery plant in Victoria. The annual savings from reduced raw material and waste disposal costs amount to $780,000. Background Cadbury Schweppes Pty Ltd's plant in Ringwood, Victoria produces a range of confectionery products, including Easter eggs, chocolate bars ...


  • MAS Introduces Filter Innovation

    Our partner MAS has recently attracted attention for a range of technical innovations in extrusion and plastic recycling technology, including the co-rotational conical twin screw extruder and a waterless cleaning system for film flakes. This ...


    By eFACTOR3 LLC

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

  • Beta ratios explained and applied to liquid filter selection

    Liquid Filter Beta Ratios: Absolute rated liquid filter selection is tied to the media micron rating, materials of construction, construction design, and particulate removal efficiency filter factor known as its Beta Ratio (Figures 1, and 2). Consider that Engineering and Purchasing usually see absolute rated liquid filter efficiencies from vendor data sheets and quotes listed at 99%, ...

  • Dust collection dilemma: ostrich egg dust

    Rick Peil from the Toolking Superstore was presented with an interesting dust collection dilemma. Tamera Seevers creates unique fine art out of ostrich eggs (www.tameraseeversstudio.com). Carving and finishing the ostrich eggs takes up to three months and creates a very fine, ostrich egg dust. Her problem was with her 1-micron bag on the dust collection system, the dust was still escaping into ...


    By American Fabric Filter Co

  • Ready, set... mix: water re-use and its role in concrete mixing

    Water is a key element to the concrete ready-mix manufacturing process. From mixing new concrete to cleaning out trucks, high volumes of water are in demand. To stay ahead, many operations, large and small, are prepared to re-evaluate their process to find opportunities for water re-use. A filter press is an effective piece of equipment for concrete water recycling. It separates ...


    By M.W. Watermark LLC

  • Monlangroup retrofit of Cincinnati “full cycle recycler”

    Challenge Manufacturer purchases a recycling system that isn't meeting their need to extend the life of coolant and reduce coolant and disposal costs. Customer Gardner-Denver Industry Compressed Air and Gas, Vacuum and Fluid Transfer Products Tramp Oil Separator Paper Roll Filter ...


    By PRAB, Inc

  • Composting case study: Kurtz Bros tackles yard waste contamination

    Kurtz bros., INc. (Columbus, OH) supplies both consumers and landscape contractors with high-quality mulch, compost, soil amendments and topsoil. The company operates several organic recycling facilities throughout the state of Ohio spanning from Columbus (the state’s largest organic recycling facility) to Cleveland. Its local yard waste facilities accept everything from leaves and grass ...


    By Waste Advantage Magazine

  • New Nozzle Technology “Cleaning More with Less”

    This technical paper will explain the new nozzle technology developed by Scientific Dust Collectors that allows high air-to-cloth ratio baghouses to use 80psig of compressed air instead of the industry standard 100psig.   The reverse pulse jet baghouse has been around for over 50 years and the cleaning cycle has not changed very much during that time. The cleaning cycle is the most important ...


    By Scientific Dust Collectors

  • Waste Water Treatment Plant City of Oakley, UT

    The City of Oakley was very happy with their new MBR facility except for the filter bag sludge dewatering system that was very labor intensive and usually didn’t produce an adequately dewatered sludge. Scott Rogers of Aqua Engineering and Bob Johnson, the Operations Mgr., chose to replace the bag system with a 0.9 meter model DDP belt press system from BDP Industries. The DDP belt press ...


    By BDP Industries

  • Air filtration applications for membranes

    Given their unique performance attributes membranes are finding use in a growing number of high efficiency air filtration applications. One example is in respirators and personal protective equipment. Applications where intense physical demands and risk of exposure to harmful contaminants are present demand the high efficiency / low pressure drop combination of expanded polytetrafluoroethylene ...

  • Global Polyphenylene Sulfide (PPS) demand is expected to reach 170 kilo tons by 2020 growing at a CAGR of over 10% from 2013 to 2020

    The global market volume for Polyphenylene Sulfide (PPS) is expected to be over 170 kilo tons by 2020, according to a new study by Grand View Research, Inc. Growth in global automotive industry; particularly in China is expected to drive the demand for PPS. In addition, the favorable regulatory scenario in China with regards to the automotive industry is expected to further augment the demand for ...


  • Hyde ultrafiltration for tumbling/vibratory deburring applications

    Challenge Fabrication manufacturer has an issue with discharging tumbling water from two vibratory deburring systems. Customer Hartzell Manufacturing Industry Medical, Electronic and Bank Security Product Hyde Ultrafiltration System Business Benefits Realized ...


    By PRAB, Inc

  • Pilot and Industrial-Scale Experimental Investigation of Numerically Optimized Cyclones

    A new geometry of reverse-flow gas cyclones obtained by numerical optimization was shown at the laboratory scale to be significantly more efficient than other high-efficiency designs. However, it is usually recognized that experimental results obtained with laboratory-scale or sampling cyclones cannot be extrapolated to pilot or industrial scales. The present paper confirms, at these larger ...

  • Process Water Treatment – Challenges and Solutions

    Untitled Document Clean water is needed by chemical-process plants for a wide range of process-related and auxiliary uses. Likewise wide is the range of options available to the ...


  • Removing Heavy Iron Deposits Improves Effluent Output and Decreases Costs Case Study

    The Problem At a local manufacturing facility, ground water pumped with #6 oil was heavily impacted with iron deposits. Heated water and product was being pumped into the existing oil water separator, but the iron fouling the unit and the downstream carbon filter and dry well limited flow. Frequent carbon replacement was required and was very costly. The ...


    By Hydro Quip, Inc. (HQI)

  • Geotube Dewatering for Lagoon Sludge - Case Study

    Background In many animal waste management schemes it is desirable to separate solids from waste water and/or manures. In cooperation with the Department of Animal and Dairy Science, animal waste specialists from Biological and Agricultural Engineering are field testing a technology new to agriculture, to remove solids from lagoons. The test is currently being conducted at the UGA Dairy ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you