filter damage monitoring Articles
-
Filter damage monitoring of filter dust - Case Study
Client: Manufacturer of fertilisers Product: Filter dust Installation location: underneath the silo (with integrated stirring device) What measuring process was used previously: no measurement was taken According to the client, the Dusty offers the following advantages: Pre-calibrated Simple commissioning Maintenance-free Reliable Client benefits: Reliable filter damage ...
By ENVEA
-
Filter damage monitoring of washing powder - Case Study
Client: Washing powder manufacturer (Switzerland) Product: Filter dust Installation location: in the clean gas channel What measuring process was used previously: no measuring process was used According to the client, the Dusty offers the following advantages: Simple retrofitting Maintenance-free Good price/performance ratio Client benefits: Avoidance of breakdowns in the ...
By ENVEA
-
Filter damage monitoring of cement dust - Case Study
Client: Cement plant (Switzerland) Product: Cement dust Installation location: in the clean gas channel What measuring process was used previously: none According to the client, the Dusty offers the following advantages: Maintenance-free Simple commissioning Low price, reliable Client benefits: Easy and reliable filter damage monitoring ...
By ENVEA
-
Filter damage monitoring of metal grinding dust - Case Study
Client: Coil Spring Manufacturer (Germany) Product: Metal grinding dust Installation location: In the clean gas duct after the filter (7 measuring points) What measuring process was used previously: No measurement was taken According to the client, the Dusty offers the following advantages: Pre-calibrated Simple commissioning Cost-effective and reliable Client benefits: With our ...
By ENVEA
-
Filter damage monitoring in clean gas channel - Case Study
Client: Mühle Rünningen GmbH & Co. KG (Germany) Product: Filter dust Number of systems: 14 Installation location: Clean gas channel What measuring process was used previously: No measuring or monitoring process was used Advantages of filter damage monitoring: low acquisition cost simple retrofitting maintenance free Client benefits: Based on the new ventilation ...
By ENVEA
-
Filter damage monitoring in clean gas side - Case Study
Application A coffee producer fi nishes coffee beans. During the handling process the beans are cleaned with water inside a tank. After cleaning, the beans are dried in another tank with heat. The moist air that results from this process is extracted by a vacuum, fi ltered and returned to the heat exchanger. The cleaning of the exhaust air is done by fi lter hoses. Thereby air is pressed ...
By ENVEA
-
Filter damage monitoring with Dusty Ex - Case Study
Application A chemical manufacturer producing photoinitiators. Photoinitiators are chemical compounds, which disintegrate after the absorption of light in a photolytic reaction. They produce reactive compounds, which are able to initiate a chemical reaction (for example a polymerisation). In praxis these initiators are used to harden lacquers and paints under the infl uence of UV-light. ...
By ENVEA
-
Dust filter damage monitoring on clean gas site - Case Study
Client: Waste incineration plant (Southwest Germany) Product: Lime dust What measuring process was used previously: There was no monitoring system available for the limestone silos. Client benefits: Increased dust concentration, due to filter leakages, used to be noticed at quite a late state because only sporadic sight checks were carried out. With the installation of "Dusty", holes in ...
By ENVEA
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you