fire-tube oil boiler Articles

  • Newtownabbey - oil fired boiler case study

    Customer: Ian Perris Location: Newtownabbey, N Ireland Heating System: Oil Fired Bosch Boiler Installed: 2007 This is a four bedroom 3,800 sq foot detached built in 2000. The owner installed the Vortex in 2007 as oil was on the rise and their energy usage was also increasing. Prior to fitting ...


    By Vortex Energy Saver

  • oil fired boiler price in South Africa

    oil fired boiler price in South Africa  ...


  • Pakistan SZS Gas Fired Steam Boiler

    Heavy Oil, Light Oil, Residual Oil, Natural Gas, City Gas, and Blast Furnace Gas can be used as Fuel. The boilers can also be applied to generate electricity at some districts where electricity power is in short. So are a variety of industrial productions, living and remote areas, and oil field. Even they can be used as a power plant boiler startup. SZS series oil & gas boilers are ...


  • How to Prevent the Corrosion of Biomass Fired Boiler

     Biomass pellet,as the fuel of biomass fired boiler, is very more affordable than coal,oil and natural gas,and has no pollution to environment,it belongs to the renewable energy sources.Like other industrial boilers,biomass fired boiler also needs the maintenances to prevent corrosion in the process of its usage to prolong its service life.the engineer form Zhengzhou Boiler Co., Ltd.,gives ...


  • ZG chain grate biomass fired boiler in Pakistan

    The new chain grate boiler system with chain grate stocker permits a wide range of biomass fuels including Bagasse, crop stalk, mustard stalk, cotton stalk, rice husk, coffee grounds, de-oiled bran , wood waste , Coconut shell ,roasted chaff, lignite, paper sludge, coal,corn cob, spent grain with high ash contents to be combusted in an efficient manner with the added advantage of automatic ...


  • Tuning Your Boiler for EPA Boiler MACT Compliance

    The EPA’s Boiler MACT regulations are heating up. Boiler MACT is an EPA rule to limit hazardous air pollutants (HAP) from commercial and industrial boilers and process heaters. Originally proposed in 2011 as a mandate driven by the Clean Air Act,  the rules are Area Source Boiler MACT 40 CFR 63, subpart JJJJJJ for smaller boilers (stores, hotels, apartments, ...


    By Sierra Instruments, Inc.

  • Energy efficiency and emission reduction of TPM, PM2.5, and SO2 from natural gas and fuel oil fired boiler exhausts

    Fully 8% of all of Canada’s energy consumption occurs in gas and fuel oil fired boilers in commercial and institutional facilities1, with proportional amounts of greenhouse gases, particulate matter, and other pollutants. Recently particulate matter, and in particular that smaller than 2.5 microns (PM2.5) has garnered specific attention due to attributed health effects as demonstrated by ...

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • EPA issues final rules for boilers

    The U.S. Environmental Protection Agency (EPA) reports that more than 200,000 boilers, process heaters and incinerators will be impacted by a set of Clean Air Act regulations issued on February 21, 2011. Since EPA first proposed the ...


    By Bergeson & Campbell, P.C.

  • Monitoring flammable gas in boiler houses

    The most common fuels in use for space and water heating are Oil, Natural Gas and Liquid Petroleum Gas (LPG). By far the most popular, clean and cost effective solutions are utilising Natural Gas or LPG. The traditional safety measure derived from the time of oil fired boiler houses is the use of a fusible link placed above the each boiler. The fusible link is intended to melt if it becomes ...

  • Catalytic boilers with catalytic fluidised bed

    In this paper, conditions of work, special features and problems of boilers with catalytic fluidised bed are described. The specific conditions, when the catalyst layer remains stationary and granular or becomes spouting, are also considered. There are some main zones in the catalytic boilers with fluidised bed, which characterise such boilers and which must exist in them under normal working ...


    By Inderscience Publishers

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • Cumulative exergetic assessment of LPFO utilised steam boilers

    This paper relates to a study on the energy and exergy resources, transfers, consumption and losses in the combustion and heat exchanging units of industrial steam boilers. Mass, energy and exergy analyses, which included the physical and chemical exergies of material streams, were used to investigate the energy resource utilisation of Low Pour Fuel Oil (LPFO) in industrial steam boilers. The ...


    By Inderscience Publishers

  • The potential of energy conservation and emission reduction for the Chinese boilers

    With the publication of the coal convert to gas fired boiler policy, to control the pollution from the resource, all the provinces has removed, stopped and reformed to the high energy saving coal fired boilers. It is reported that there is a huge space in the energy saving and emission. low combustion, high energy saving potential the Chinese industrial boiler has a wide market,and most of them ...


  • Navigating NSPS subpart Db for boilers: a case study

    Over the past year, Trinity assisted a chemical company with the permitting and installation of a new 220 MMBtu/hr package boiler. The new natural gas-fired boiler replaces coal-fired units that were installed in the 1940s. Navigating through the numerous, and at times conflicting, regulatory requirements applicable to such a unit has been challenging. With careful planning and implementation, ...


    By Trinity Consultants

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Heywoords - non condensing boiler case study

    Customer: John Hart Location: Heywards Heath, West Sussex Heating System: Open Vented Oil Fired Non Condensing Installed: 10/07 Property: 17TH Century house which had been added to over the years. Problem: A small 17th century cottage that had rooms ...


    By Vortex Energy Saver

  • New boiler MACT and affiliated rules proposed

    EPA proposed three related rules (with final rules expected by December 16, 2010), intended to reduce the emission of hazardous air pollutants (HAPs) from industrial, commercial, and institutional boilers and process heaters as well as commercial and industrial solid waste incinerators. Simultaneously, it also proposed a definition of solid waste that could potentially affect some units currently ...


    By Trinity Consultants

  • Common Boiler Feed Water Treatment Issues and How to Avoid Them

    When treating boiler feed water (the combination of boiler makeup and condensate return water), several issues can arise that cause boiler scaling, corrosion, fouling, and system failure. Below, we break down the most common boiler feed water issues and how to avoid them to help ensure system efficiency and operational safety. While treating boiler feed water is extremely ...


    By SAMCO Technologies, Inc.

  • Scaling vs. Corrosion: Why It Matters for Your Boiler Feedwater System

    When using boilers for an industrial plant and process, one of the most important things to implement is the appropriate treatment of the boiler feedwater before it has a chance to scale and corrode equipment. Before beginning any process with a boiler, understanding the makeup and return water chemistry/characteristics, the manufacturer’s requirements for the boiler (what pressure it ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you