fixed air sensor Articles

  • Understanding the Benefits of Fixed Gas Detection

    "Fixed gas detection is an essential method of ensuring maximum protection for personnel and plant. There are a variety of technologies available for a multitude of applications. Understanding fixed gas detection is the first step in providing safety." What is fixed gas detection? Fixed gas detection is installed with the aim of providing continuous, area and personnel protection. ...


    By a1-cbiss

  • Fixed multi-parameter gas detection system can ensure industrial facilities are safe from hazardous or toxic gases

    Industrial workplaces are likely to come across one or more hazardous or toxic gases. Combustible gases such as methane are highly dangerous because they can cause large and fatal explosions when ignited. Other problem areas when working in industry are carbon monoxide (which poisons the cardiovascular system), oxygen deficiency, and elevated levels of other gases and pollutants, depending and ...


    By PPM Technology

  • Detecting Gases: What You Can`t Smell Can Hurt You

    Walking through a drill-site area, a worker smells rotten eggs and stops tor a minute or two to assess where a gas leak might exist. Rubbing his itchv eves as he investigates further, he notices that he no longer smells the tell¬tale hydrogen sulphide odour. He does not realize that the gas has deadened his olfactory senses and unless he leaves the area within seconds, he could lose ...

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Ultrasonic Testing For Non Destructive Testing

    Ultrasonic Testing or UT as its known has programs in a wide range of sectors, from aerospace, automobile, to substance, oil, large storage space, and power creation and overseas. UT is aspect of a selection of techniques known as NDT (Non Destructive Testing) methods. Their objective in industry is to allow the examination of parts and equipment ...


    By Non Destructive Testing Lab

  • What is a Breathing or Respiratory Zone?

    In the past, vehicle exhaust gas detectors have been installed on or near the ceiling. In contrary, Critical Environment Technologies Canada Inc. (CETCI) has always recommended that they be installed in the breathing zone. Recently, Quebec’s regulation has reinforced CETCI’s recommendations. It states that “dusts, gases, fumes, vapours and mists found in the workplace ...

  • Technical Focus: Sludge Blanket

    Regardless of treatment process, sludge blanket control is an important aspect of any wastewater treatment plant, and correct monitoring and treatment of sludge is paramount for efficiency and cost control. Manual monitoring of sludge blanket levels is an occasional and often rushed method of control and can lead to inaccuracies being compounded over time, potentially leading to overspill into ...


    By Partech (Electronics) Ltd.

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Peace of mind for waste management drivers

    Smooth running tires assure peace of mind for drivers concerning their vehicles. Tire Pressure Monitoring Systems (TPMS) constantly monitor tire pressures and warn of low tire pressures. Only about 10 percent of tire-induced breakdowns are due to sudden tire damage; the remaining 90 percent start with slow leaks. However, drivers usually notice this gradual air loss too late, and more serious ...


    By Waste Advantage Magazine

  • If you can’t stand the CO2, get out of the kitchen – Part 2

    In Part 1 we reviewed the many standards, specifications and technical bulletins on commercial kitchen ventilation that have been published since 2000. In Part 2 we investigate four of the more recent ones, with a particular focus on carbon dioxide (CO2) ...


    By Analox Sensor Technology

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Is your Plant as tight as you think? Leak Detector for extremely toxic Gases, a Field Test Report

    Leak detection of commodity gases in chemical plants is a day-to-day practice. The sensor technology available for this application is field proven and reliable. No question about it, existing sensors will do the job. However, in plants manufacturing or handling extremely toxic substances, the picture is different. For example, take phosgene. The existing sensor technology for leak detection ...

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • Gas safety in confined spaces

    A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and ...

  • Gas Safety in Confined Spaces

    Introduction A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and brewing, as ...

  • GE Leakwise Application Notes: Groundwater Remediation

    The unique capabilities of the Leakwise* Oil on Water Monitoring Systems enable remote measurement of key parameters for: Site assessments Recovery wells and remediation systems ...


    By GE Analytical Instruments

  • Greene King Brewery gas leak – carbon dioxide in breweries

    On Thursday 15 October 2015, a carbon dioxide leak occurred at the Greene King Brewery on an estate in Bury St Edmunds in Suffolk. Emergency services were sent to the incident and nearby residents were evacuated as a precaution. Twenty people were rescued from the building, and the incident was quickly taken control of. ...


    By Analox Sensor Technology

  • Carbon Dioxide (CO2) Leak in Soda Machines

    Carbon dioxide, also known as CO2, is a very well known gas type but not everyone knows how deadly it is. Most people know it as a gas that humans exhale but commercially, it is manufactured and shipped as a liquefied compressed gas or is used as dry ice in its solid form. A common use of CO2 gas is in soda fountain machines to carbonate soft drinks by pressurizing the CO2 ...

  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you