flare stack Articles

  • Assist Gas Measurement in Flare Stacks

    The Customer The company manufactures solvents, polymers and intermediary chemicals. These products are sold worldwide and are used in the production of automobile interiors, steering wheels, paints, tires, adhesives, furniture, cosmetics and many other consumer and industrial products. The Process The Company’s site is large, thousands of acres, ...

  • Stacking up: flare Monitoring from LumaSense

    Lenny Shaver, LumaSense Technologies’ director of product management, explains the company’s IR and pyrometer technologies FLARING systems are common in many industries to burn gases before they enter the atmosphere. The safe operation of a flaring system requires the continuous monitoring of pilot flames and flared gases to ensure that vented gases are ignited. As ...

  • Modelling industrial flares impacts

    This document introduces a new software to estimate the atmospheric impact of industrial flares. The software allows to design stacks with correct height and diameter in order to minimise risks for workers and nearby structures. It also allows to estimate the thermal impact and acoustic impact of existing or future flares. Flame tilting due to the wind speed can be modelled with a simple ...


    By Enviroware s.r.l.

  • Development of Low noise landfill gas flare

    Summary: Increasing requirements of the environmental standards and planning permission conditions create more challenges to the equipment providers. Environment Agency guidance demands low emission levels and local planners put low noise levels in their conditions for landfill sites. Achieving both at the same time with conventional equipment was found problematic. Biogas Technology has ...


    By Biogas Technology Limited

  • Pollution reduction from flares by swirl vanes in a cross-flow

    The effect of swirl on the performance of a flare stack was experimentally investigated as a passive control technique for combustion in a cross-flow. The burner comprised a circular fuel nozzle with a co-annular airflow, swirled by a concentric vane swirler, with a crosswind of air at the flare tip. It was found that the flames issuing from swirl-vane flare tip were shorter and had wider flame ...


    By Inderscience Publishers

  • Extended exergy accounting applied to the flaring practice in oil fields

    An original procedure based on the Extended Exergy Accounting method is described and implemented in this paper. The goal is the quantification of the environmental externality linked to the chemical pollutants released by an elevated flare stack (SOx and NOx). The extended exergy calculations provide a measure of both the exergy flux ...


    By Inderscience Publishers

  • Finding the needle in the hay stack - tracing seabed gas seepages using hullborne multibeam echo sounder, and AUV based sonar and optical systems case study

    Scientific objective A better understanding of the shallow geological systems in the Barents Sea with particular attention to fluid flow Specific objectives Identify regional spatial distribution of gas flares within an area of 3000 km2 in the Barents Sea Identify and describe associated structures (i.e. pockmarks, carbonate reefs) using ...


    By Franatech GmbH

  • Case study - ABUTEC 20 and ABUTEC 100

    Economical flaring solutions for low flow applications. The completely enclosed combustion allows for stack performance testing that isn’t available with traditional utility ...


    By ABUTEC LLC

  • Landfill gas analysis telematics in Slovenia case study

    Application Landfill - waste to energy Equipment AEMS Location Novo Mesto, Slovenia Customer AFS client, Minerva Žalec d.d Requirement The customer specified a 6-channel landfill gas analyser with secure online internet access for data transmission. ...


    By Geotech

  • Heating value

    The CustomerThis Chemical Company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The ProcessThe company uses flare stacks to dispose of the waste products ...

  • Natural Gas Processing Case Study

    The Customer The Company is an exploration and production company that builds natural gas reserves through the acquisition and development of oil and gas assets across the U.S. They are one of the largest producers of natural gas in the Nation. The Process The Company uses multiple scrubbers to clean out the impurities of the natural gas that they ...

  • Case study - Landfill waste gas abatement

    For over 43 years Catalytic Products International has designed and manufactured specialized oxidation systems for use in controlling process-related VOC emissions. The QUADRANT-NRV Series Thermal Oxidation System is designed for use with the low-volume/high-BTU waste gas stream emitted from many landfill gas purification processes. As we utilize our Venturi Burner Package to process the waste ...

  • Creating Harmony From Dissonance in Model Development: A Business Approach

    Dispersion model development is characterized by a relatively low cost to develop a model, followed by an enormous cost to validate the models under a variety of conditions. Since harmonization in Europe is more of a “bottom up” phenomenon—contrasted to the “top down” approach in the United States— building a framework for model use and development is essential. There will be two essential parts ...

  • It’s not just clean; it’s CETCOclean - chemical cleaning of 10”and 8” ethane pipelines

    CETCO Oilfield Services Pipeline Division chemically cleaned 10” and 8” ethane pipeline segments prior to an in-line inspection (first time ILI on the 10” pipeline). The operator’s primary concerns were flow interruptions to the receiving plant and ensuring that all line debris was collected prior to entering the downstream 8” section. CETCO designed and supplied all necessary equipment and ...


    By CETCO Energy Services

  • Canarina DISPER software · air · environmental reporting · algorithms 14

      Canarina DISPER software · air · environmental reporting   9.1.5 The Dispersion Parameters  Point Source Dispersion Parameters: Equations that approximately fit the ...

  • ABUTEC Navigates to U.S. Coast Guard Certification - Case Study

    ABUTEC has carved a niche in the midstream oil & gas sector by providing turnkey Marine Vapor Control System (MVCS) solutions. But what if your site needs a custom solution? ABUTEC recently created a custom solution for Targa Resources to aid in flaring during the barge offloading process. Targa Resources, located in Channelview, Texas, is a provider of midstream services to North America. ...


    By ABUTEC LLC

  • Modeling emissions from offshore drilling

    To regulate drilling activities proposed by oil and gas companies in the oil-rich Gulf of Mexico (GOM), governing agencies require the submittal and approval of certain plan documents before drilling activities can be initiated. For drilling activities in the Western GOM, these plans typically consist of one of the following: EP, or Exploration Plan – required to conduct ...


    By Trinity Consultants

  • Oil refinery vapour gas case study

    1.0 Evaluation of Refinery Gases Various refinery gases are generated in the process of oil refining. These vary, depending upon the type of crude oil being distilled, such as Reduced Crude distillation, or Naphtha cracker. For the purposes of this case study the description and range of refinery gases are those gases produced from refining Crude Oil and Reduced Crude only. Crude ...

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Is it better to burn or bury waste for clean electricity generation?

    The use of municipal solid waste (MSW) to generate electricity through landfill-gas-to-energy (LFGTE) and waste-to-energy (WTE)projectsrepresentsroughly14%ofU.S.nonhydrorenewable electricity generation. Although various aspects of LFGTE and WTE have been analyzed in the literature, this paper is the first to present a comprehensive set of life-cycle emission factors per unit of electricity ...


    By Novo Energy, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you