flood control valve Articles

  • Rotork valve actuators at hub of automated flood alleviation scheme - Case Study

    Overview An extended scope contract performed by Rotork Site Services has successfully delivered full automation of a flood alleviation scheme protecting the historic town of Cardigan in West Wales. The project involved replacing unreliable actuators from another manufacturer, installing a PLC control cabinet and interfacing with the existing river level sensor and telemetry system. ...


    By Rotork

  • Top 10 questions you should ask when purchasing a control valve

    Automatic control valves, much like everything else we purchase these days, are not all created equal. Some fall into the high quality bracket with pricing to match, while others hover closer to the lower quality and price sensitive end of the scale. Unfortunately, when evaluating control valve prices, it is not always clear what you are being offered ...


    By Singer Valve Inc.

  • Replacement Fill Control Valves with Electronic Flow and Metering Improve Pressure, Stop Leakage and Prevent Valve Failures

    The City of Modesto, California is situated 90 miles east of San Francisco and has approximately 200,000 residents relying on 200,000 of gallons of water a day. The City needed to upgrade three water storage tanks that hold approximately 750,000 gallons each. After years of using motor operated valves to fill water storage tanks, the city recognized that there were just too many problems. ...


    By Singer Valve Inc.

  • Kijlstra leaves the competition high and dry on flood alleviation scheme

    Kijsltra provides precast drainage solution For some people, the widespread floods of summer 2007 were a foretaste of the kind of natural disaster that results from man-made climate change. For many in the water industry, it was also a stark reminder of how urgently we need to upgrade our water infrastructure. One of those areas worst hit by the 2007 floods was Wakefield, West ...


    By Kijlstra LTD.

  • 10 Flags in Valve Chambers that Should Make You Question What Else is Wrong

    I have reached the conclusion, as a lot of you may relate too, that I may be considered one of those “cranky old men”. It shows itself in the little things. Sentences starting with the phrase “when I was your age” or ...


    By Singer Valve Inc.

  • East hull pumping station case study

    Client: Yorkshire Water CSG provided two 1200mm Hydraulic Cylinder Gate Valves as part of the East Hull Pump Station overhaul. CSG worked in partnership with Pacific Valves Ltd on the £16m flood prevention project commissioned by Yorkshire Water. Due to the low ground levels in and around Hull flooding can often be an issue. The new pumping stations will help control drainage in the ...

  • Tidal Water case study

    References from WaStop International´s own patented products. WaStop solves problems in a secure and efficient way. Harwich harbour - ENGLAND Anglian Water is one of the leading providers of water and waste water services in Europe and serves the needs of around six million industrial, commercial and domestic customers. Aggressive tidal waters, silt and poor ...


    By WaStop International AB

  • Lake supply & treatment expansion

    Client: City of Fort Smith Completion Date: 2003 - Design2006 - Lake construction2008 - Plant construction Services Provided Supply reservoir enlargement 30 million-gallon-per-day (MGD) water plant renovation New 20-MGD dual train water plant addition Pulsating clarifiers ...


    By Burns & McDonnell

  • Boiler feedwater deaerators

    The thermophysical deaerator is by far the most applied technology when oxygen and carbon dioxide in Boiler Feed Water must be reduced to negligible concentrations Bono ARTES has inherited the experience in the design of Deaerators that started up within the BONO Group in 1959. The Boiler Feed Water, if in equilibrium with the atmosphere, may contain significant levels of corrosive gases, mainly ...


    By Artes Ingegneria SpA

  • River weir upgrade illustrates Rotork’s extended scope capabilities - Case Study

    Overview Rotork is well known for supplying flow control equipment for new and upgraded industrial plants and processes on a global scale. In these contracts, often involving tens or hundreds of valve actuators and associated control equipment, Rotork works with valvemakers, engineering companies and end users as one of several members of a project team, each with different areas of ...


    By Rotork

  • Bedford Pumps keep up the tradition at Welches Dam P.S.

    Bedford Pumps Ltd has recently replaced pumps originally installed by W H Allen, the company that facilitated their existence, at Welches Dam Pumping Station in the Cambridgeshire Fens. Bedford Pumps was formed in 1987 by former members of the Pump Department at NEI (WH Allen) after the company closed their pump manufacturing facility within the town. Since then BPL have re-established themselves ...


    By Bedford Pumps Ltd

  • District Heating – hot water serves up a successful recipe for Rotork - Case Study

    Overview The Metropolitan Copenhagen Heating Transmission Company (CTR) operates the largest district heating system in Denmark. Seven combined heat and power (CHP) and two waste incineration power plants, supported by 14 peak load power plants, supply heat to the CTR transmission system, consisting of over 100 kilometres of mostly underground pipelines with diameters up to 800 mm. Water is ...


    By Rotork

  • Puny drain pumping station

    Bedford Pumps Ltd has recently completed the installation of the Mechanical and Electrical plant at a new pumping station at Puny Drain. The drain which is controlled by the East of Ouse, Polver and Nar IDB’s, drains an area of low lying land to the south of Kings Lynn. The recent redesign of the drainage system in the area necessitated the construction of a new drain and pumping station to ...


    By Bedford Pumps Ltd

  • Pendulum Counter-flow Cooler

      Specially designed for cooling larger size extruded feed, puffing feed and feed pellets in pellet plant, the SKLB pendulum counter-flow cooler is an advanced cooling machine. This machine gets rid of the shortcomings of side valve structure and succeeds in cooling large feed pellets. At present, with more and more puffing and extruded feed flooding into the feed market, pendulum ...


    By Allance Pellet Machinery

  • Fluoridation: A Better Way? case study

    Ffficient, cost-effective addition of fluoride to drinking water is increasingly important as the U.S. EPA and Department of Health and Human Services contemplate additional nationwide standards for fluoride injection. A relatively new company, Integrity Municipal Services (IMS), has developed a new design for sodium fluoride saturator and feed systems and has successfully applied it at customer ...


    By Integrity Municipal Systems

  • Protect your high pressure pump

    There are many opportunities to protect your high pressure pump. The best pump protection is selecting the right pump for the application. The next best pump protection is proper installation. And the easiest pump protection is regular maintenance. Pump Selection Selecting the correct high pressure pump for the application will offer the best pump protection. Trying to get a pump ...


    By Cat Pumps

  • 5 Growing Extreme Weather Threats to America’s Cities

    Weather events have been dominating the news recently thanks to the “polar vortex” that caused record cold temperatures across the nation. But just a few months ago, the news was filled with other events: record rain and flooding in Colorado; destructive tornadoes in Oklahoma; widespread drought in the Southwest; and the sluggish recovery from Superstorm Sandy in New Jersey. Unlike ...


    By GLOBE Foundation

  • Crisafulli submersible pumps and power units-case study

    In June, 1997, Mr. Quinn of EPCO, the customer's designated agent, inspected the systems at Crisafulli's manufacturing plant, and these made in Montana pumping systems were tested and shipped to Siberia. SRS Crisafulli, Inc., founded in 1966, is one of a few select manufacturers of specialized, engineered pumping and dredging systems in the United States. From its beginning, SRS Crisafulli has ...


    By SRS Crisafulli, Inc.

  • Hurricane response emergency modeling with InfoWorks WS

    The island of Jamaica is located in the Caribbean Archipelago, 90 miles south of Cuba, 600 miles south of Florida and 100 miles south-west of Haiti. It has a population of 2.6 million, 800,000 of whom live in the metropolitan area of the capital, Kingston. The island is mountainous, with a distinct east-to-west ridge and a dramatic relief change in the east. Like the rest of the region, ...


    By Innovyze

  • Paper mill installs APEX hose pumps for abrasive pigment dosing

    Paper mill installs APEX hose pumps for abrasive pigment dosing The Beetham, Cumbria plant of BillerudKorsnäs has replaced a progressive cavity (PC) pump with APEX10hose pump technology from Watson-Marlow Fluid Technology ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you