flow meter manufacturer Articles

  • Portable Hydrant Flow Meters

    Leading the way for hydrant verification flow and pressure measurement Langham Industrial Controls strive to provide the most innovative market leading hydrant verification instrumentation. The Horizontal Standpipe Flow Meter provides unrivalled accuracy of ± 0.5% within a wide flow range. The swan neck design ensures that the AquaMasters electromagnetic sensor is always full and as the ...

  • Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response

    The Western European nation has 20 mobile diesel-driven pumps on standby, ready to assist in national and international emergencies. One of the smallest and most densely populated countries in Western Europe, the Netherlands has nearly 10 million residents who live and work below sea level. Without active water management and primary flood defenses, ...


    By BBA Pumps

  • BBA Mobile Emergency Pumps Provide Rapid Response for Floods

    Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response In its latest edition, the North American PUMPS & SYSTEMS magazine publishes an in-depth article featuring the history and current usage of emergency mobile pumps. The Western European ...


    By BBA Pumps

  • The evolution of thermal mass flow meters

    Who were some of the pioneers in thermal mass flow technology? A. Thermo-Systems, Inc. (TSI) began in its founder’s basement in 1959, with a cooled-film anemometer designed for transient measurements in high temperature fluid flows. This led to TSI’s hot-film and hot-wire anemometers, the first commercial products of this type. These immersion-type devices were used mainly as ...


    By Sierra Instruments, Inc.

  • Non-Contacting Solution for Plugged Off Flow Meters in The Oil Patch

    For years Petrobakken Energy Ltd. used inline turbine flow meters to track the flow rate of oil recycled to treaters. But with a high concentration of wax and sand in the oil, the turbine meters were quickly plugging off. The line had to be shut down at least once a day and the turbine flowmeters disassembled for cleaning. This was troublesome and expensive. Petrobakken knew there had to be a ...


    By Greyline Instruments Inc.

  • Non-contacting solution for Plugged off flow meters in the oil patch - Case Study

    For years Petrobakken Energy Ltd. used inline turbine flow meters to track the flow rate of oil recycled to treaters. But with a high concentration of wax and sand in the oil, the turbine meters were quickly plugging off. The line had to be shut down at least once a day and the turbine flowmeters disassembled for cleaning. This was troublesome and expensive. Petrobakken knew there had to be a ...


    By Greyline Instruments Inc.

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • Sugar Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Reducing Costs of Steam Flow Measurement

    Traditionally, steam flow has been measured with a differential pressure device. This is typically an orifice plate. However, such devices are inherently volumetric flow measurements. As we have discussed in previous blog posts, changes in pressure and temperature ...


    By Sierra Instruments, Inc.

  • Open Channel Flow - The use of Level sensors for open channel flow measurement

    Open Channel Flow - The use of Level sensors for open channel flow measurement Level sensors from SolidAT are implemented in Open Channel Flow applications. In these types of applications, the level sensor is installed above a special water flow structure and accurately measures level of flowing water or wastewater. The sensor then calculates flow through the structure ...

  • Portland Cement Manufacturer Upgrades Technology,Improves Operation and Reduces Costs

    One of the largest Cement factories in America was interested in reducing frequent visual emissions inspections mandated by new Portland Cement (MACT) rules in effect since June 2002. A second issue was the need to measure solids flow in the finish mill operation to determine the rejects flow rate. During a recent upgrade to the finish mill circuit, the rejects flow, which is traditionally ...


    By Auburn Systems, LLC

  • APEX – Peak performance from the market leading hose pump manufacturer

    Decades of experience and knowledge have combined with closely scrutinised customer feedback to deliver APEX, three new hose pumps from Bredel, part of the Watson-Marlow Fluid Technology Group. Designed to suit all dosing, metering and transfer applications from 2.8 to 1,200 litre/hour across a broad range of applications, the new APEX pumps are now the first choice for processing plants the ...

  • Monitor Dredging Slurry Flow from Outside the Pipe

    Dredging Equipment Manufacturers Choose Non-Contacting Greyline Flow Meters The Challenge Thousands of dredges are operated to maintain navigation channels in our rivers, lakes and harbours and to mine sand and gravel for the construction industry. Managing and optimizing production from a dredge requires continuous monitoring of pipeline pressure, vacuum ...


    By Greyline Instruments Inc.

  • Comparing Capacity Expansion and Waste Minimization Options at a Chemical Manufacturing Facility

    ABSTRACTIndustrial wastewater treatment facilities that are nearing their capacity limit often have a relief option that typically is not available to municipal treatment facilities. That option is to reduce waste loads coming from the production areas by optimizing manufacturing processes so that less waste is generated per pound of product made. In making the decision between reducing waste ...

  • Qdos metering pumps selected by Russian automotive plant

    After a comprehensive evaluation and trial period, the Russian plant of steel wheel manufacturer, Mefro Wheels, has opted to use the latest Qdos 30 metering pumps from Watson-Marlow Fluid Technology Group at its facility in Togliatti. Selected ahead of diaphragm metering pumps, the Qdos 30 pumps have been fully integrated into a complex process control system at the plant’s ...

  • GKN aerospace success with portable impedance meter

    The GKN site in Cowes, Isle of Wight, UK, has long experience in the design and manufacture of passive sound insulation systems for air-intakes and by-pass ducts of aircraft engine nacelles. Dr. Armando Vavalle, Technology Development Engineer from GKN reports here on impedance tests conducted with Brüel &Kjær’s Portable Impedance Meter Type 9737 for the development of such ...

  • Two Technologies for Flow Measurement from Outside a Pipe

    Doppler and Transit Time are two very popular types of flow meter for non-invasive measurement of flow in full pipes. We tend to confuse these technologies because they are both ultrasonic and both measure flow by using sensors clamped onto the outside of a pipe. In the real world they actually work best in opposite applications. Success in your installation depends on understanding the ...


    By Greyline Instruments Inc.

  • FLOW-TRONIC S.A./N.V. - case study

    Customer: FLOW-TRONIC S.A./N.V. Sector: Water and wastewater industry Country: Belgium Technology Supplier: Microtronics Engineering GmbH Year of Cooperation: 2010 Website: www.flow-tronic.com The Customer FLOW-TRONIC is internationally recognized as the leading distributor and manufacturer of innovative and accurate liquids flow measuring ...

  • Keeping Everything Flowing - How process technology from ProMinent secures optimal flow for industry

    Do you know about the flow? That warm and fuzzy feeling when everything is running perfectly? Transferred to the field of process technology, this ideal condition has been reached when all components within a processing plant interact perfectly with one another, when processes are executed efficiently, safely and economically and the system is capable of delivering its maximum productivity. To ...

  • Primary Standard Gas Flow Calibration—The Only Guarantee of Accuracy

    At Sierra, we have a saying: “An instrument’s accuracy is only as good as its calibration.” The accuracy of your mass flow controller (MFC) is essential in assuring the efficiency, performance, and quality of your flow meter. In many cases, if your instrumentation is not calibrated, then a decline in performance is possible due to ...


    By Sierra Instruments, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you